[PATCH] etnaviv: Use the correct LOG instruction on GC3000
Wladimir J. van der Laan
laanwj at gmail.com
Tue Jul 11 13:07:09 UTC 2017
GC3000 has a new LOG instruction, similar to the new SIN and COS instructions.
Generate the new instruction sequence when appropriate; there are
two occasions, as part of LIT and the generator for the LG2
instruction itself.
Signed-off-by: Wladimir J. van der Laan <laanwj at gmail.com>
---
src/gallium/drivers/etnaviv/etnaviv_compiler.c | 63 +++++++++++++++++++++++---
src/gallium/drivers/etnaviv/etnaviv_internal.h | 4 +-
src/gallium/drivers/etnaviv/etnaviv_screen.c | 2 +-
3 files changed, 59 insertions(+), 10 deletions(-)
diff --git a/src/gallium/drivers/etnaviv/etnaviv_compiler.c b/src/gallium/drivers/etnaviv/etnaviv_compiler.c
index 07315f7..6435b84 100644
--- a/src/gallium/drivers/etnaviv/etnaviv_compiler.c
+++ b/src/gallium/drivers/etnaviv/etnaviv_compiler.c
@@ -1389,12 +1389,27 @@ trans_lit(const struct instr_translater *t, struct etna_compile *c,
else
src_w = swizzle(src[0], SWIZZLE(W, W, W, W));
- struct etna_inst ins[3] = { };
- ins[0].opcode = INST_OPCODE_LOG;
- ins[0].dst = etna_native_to_dst(inner_temp, INST_COMPS_X);
- ins[0].src[2] = src_y;
+ if (c->specs->has_new_transcendentals) { /* Alternative LOG sequence */
+ emit_inst(c, &(struct etna_inst) {
+ .opcode = INST_OPCODE_LOG,
+ .dst = etna_native_to_dst(inner_temp, INST_COMPS_X | INST_COMPS_Y),
+ .src[2] = src_y,
+ .tex = { .amode=1 }, /* Unknown bit needs to be set */
+ });
+ emit_inst(c, &(struct etna_inst) {
+ .opcode = INST_OPCODE_MUL,
+ .dst = etna_native_to_dst(inner_temp, INST_COMPS_X),
+ .src[0] = etna_native_to_src(inner_temp, SWIZZLE(X, X, X, X)),
+ .src[1] = etna_native_to_src(inner_temp, SWIZZLE(Y, Y, Y, Y)),
+ });
+ } else {
+ struct etna_inst ins[3] = { };
+ ins[0].opcode = INST_OPCODE_LOG;
+ ins[0].dst = etna_native_to_dst(inner_temp, INST_COMPS_X);
+ ins[0].src[2] = src_y;
- emit_inst(c, &ins[0]);
+ emit_inst(c, &ins[0]);
+ }
emit_inst(c, &(struct etna_inst) {
.opcode = INST_OPCODE_MUL,
.sat = 0,
@@ -1450,7 +1465,7 @@ static void
trans_trig(const struct instr_translater *t, struct etna_compile *c,
const struct tgsi_full_instruction *inst, struct etna_inst_src *src)
{
- if (c->specs->has_new_sin_cos) { /* Alternative SIN/COS */
+ if (c->specs->has_new_transcendentals) { /* Alternative SIN/COS */
/* On newer chips alternative SIN/COS instructions are implemented,
* which:
* - Need their input scaled by 1/pi instead of 2/pi
@@ -1613,6 +1628,40 @@ trans_trig(const struct instr_translater *t, struct etna_compile *c,
}
static void
+trans_lg2(const struct instr_translater *t, struct etna_compile *c,
+ const struct tgsi_full_instruction *inst, struct etna_inst_src *src)
+{
+ if (c->specs->has_new_transcendentals) {
+ /* On newer chips alternative LOG instruction is implemented,
+ * which outputs an x and y component, which need to be multiplied to
+ * get the result.
+ */
+ struct etna_native_reg temp = etna_compile_get_inner_temp(c); /* only using .xy */
+ emit_inst(c, &(struct etna_inst) {
+ .opcode = INST_OPCODE_LOG,
+ .sat = 0,
+ .dst = etna_native_to_dst(temp, INST_COMPS_X | INST_COMPS_Y),
+ .src[2] = src[0],
+ .tex = { .amode=1 }, /* Unknown bit needs to be set */
+ });
+ emit_inst(c, &(struct etna_inst) {
+ .opcode = INST_OPCODE_MUL,
+ .sat = inst->Instruction.Saturate,
+ .dst = convert_dst(c, &inst->Dst[0]),
+ .src[0] = etna_native_to_src(temp, SWIZZLE(X, X, X, X)),
+ .src[1] = etna_native_to_src(temp, SWIZZLE(Y, Y, Y, Y)),
+ });
+ } else {
+ emit_inst(c, &(struct etna_inst) {
+ .opcode = INST_OPCODE_LOG,
+ .sat = inst->Instruction.Saturate,
+ .dst = convert_dst(c, &inst->Dst[0]),
+ .src[2] = src[0],
+ });
+ }
+}
+
+static void
trans_dph(const struct instr_translater *t, struct etna_compile *c,
const struct tgsi_full_instruction *inst, struct etna_inst_src *src)
{
@@ -1753,7 +1802,7 @@ static const struct instr_translater translaters[TGSI_OPCODE_LAST] = {
INSTR(DST, trans_instr, .opc = INST_OPCODE_DST, .src = {0, 1, -1}),
INSTR(MAD, trans_instr, .opc = INST_OPCODE_MAD, .src = {0, 1, 2}),
INSTR(EX2, trans_instr, .opc = INST_OPCODE_EXP, .src = {2, -1, -1}),
- INSTR(LG2, trans_instr, .opc = INST_OPCODE_LOG, .src = {2, -1, -1}),
+ INSTR(LG2, trans_lg2),
INSTR(SQRT, trans_instr, .opc = INST_OPCODE_SQRT, .src = {2, -1, -1}),
INSTR(FRC, trans_instr, .opc = INST_OPCODE_FRC, .src = {2, -1, -1}),
INSTR(CEIL, trans_instr, .opc = INST_OPCODE_CEIL, .src = {2, -1, -1}),
diff --git a/src/gallium/drivers/etnaviv/etnaviv_internal.h b/src/gallium/drivers/etnaviv/etnaviv_internal.h
index 1212fdf..8a31167 100644
--- a/src/gallium/drivers/etnaviv/etnaviv_internal.h
+++ b/src/gallium/drivers/etnaviv/etnaviv_internal.h
@@ -70,8 +70,8 @@ struct etna_specs {
unsigned has_sign_floor_ceil : 1;
/* can use VS_RANGE, PS_RANGE registers*/
unsigned has_shader_range_registers : 1;
- /* has the new sin/cos functions */
- unsigned has_new_sin_cos : 1;
+ /* has the new sin/cos/log functions */
+ unsigned has_new_transcendentals : 1;
/* supports single-buffer rendering with multiple pixel pipes */
unsigned single_buffer : 1;
/* can use any kind of wrapping mode on npot textures */
diff --git a/src/gallium/drivers/etnaviv/etnaviv_screen.c b/src/gallium/drivers/etnaviv/etnaviv_screen.c
index 60679fb..ec8de96 100644
--- a/src/gallium/drivers/etnaviv/etnaviv_screen.c
+++ b/src/gallium/drivers/etnaviv/etnaviv_screen.c
@@ -642,7 +642,7 @@ etna_get_specs(struct etna_screen *screen)
screen->model >= 0x1000 || screen->model == 0x880;
screen->specs.npot_tex_any_wrap =
VIV_FEATURE(screen, chipMinorFeatures1, NON_POWER_OF_TWO);
- screen->specs.has_new_sin_cos =
+ screen->specs.has_new_transcendentals =
VIV_FEATURE(screen, chipMinorFeatures3, HAS_FAST_TRANSCENDENTALS);
if (VIV_FEATURE(screen, chipMinorFeatures3, INSTRUCTION_CACHE)) {
--
2.7.4
More information about the etnaviv
mailing list