[PATCH v2 02/17] etnaviv: Put HALTI level in specs

[Lucas Stach]

I've pushed the first 2 patches of this series to upstream, as they
look fine, have seen enough review and I want to have them out of the
way should we need another rev of the series.

Regards,
Lucas

Am Samstag, den 18.11.2017, 10:44 +0100 schrieb Wladimir J. van der Laan:
> The HALTI level is an indication of the gross architecture of the GPU.
> It determines for significant part what feature level the GPU has, what
> state (especially frontend state) is there, and where it is located.
> 
> > Signed-off-by: Wladimir J. van der Laan <laanwj at gmail.com>
> > Reviewed-by: Christian Gmeiner <christian.gmeiner at gmail.com>
> ---
>  src/gallium/drivers/etnaviv/etnaviv_internal.h |  2 ++
>  src/gallium/drivers/etnaviv/etnaviv_screen.c   | 21 +++++++++++++++++++++
>  2 files changed, 23 insertions(+)
> 
> Unchanged since v1.
> 
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_internal.h b/src/gallium/drivers/etnaviv/etnaviv_internal.h
> index 707a1e0..48dd5bf 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_internal.h
> +++ b/src/gallium/drivers/etnaviv/etnaviv_internal.h
> @@ -60,6 +60,8 @@
>  
>  /* GPU chip 3D specs */
>  struct etna_specs {
> +   /* HALTI (gross architecture) level. -1 for pre-HALTI. */
> +   int halti : 8;
>     /* supports SUPERTILE (64x64) tiling? */
>     unsigned can_supertile : 1;
>     /* needs z=(z+w)/2, for older GCxxx */
> diff --git a/src/gallium/drivers/etnaviv/etnaviv_screen.c b/src/gallium/drivers/etnaviv/etnaviv_screen.c
> index eaf3ca2..9a957ab 100644
> --- a/src/gallium/drivers/etnaviv/etnaviv_screen.c
> +++ b/src/gallium/drivers/etnaviv/etnaviv_screen.c
> @@ -690,6 +690,27 @@ etna_get_specs(struct etna_screen *screen)
>     }
>     screen->specs.num_constants = val;
>  
> +   /* Figure out gross GPU architecture. See rnndb/common.xml for a specific
> +    * description of the differences. */
> +   if (VIV_FEATURE(screen, chipMinorFeatures5, HALTI5))
> +      screen->specs.halti = 5; /* New GC7000/GC8x00  */
> +   else if (VIV_FEATURE(screen, chipMinorFeatures5, HALTI4))
> +      screen->specs.halti = 4; /* Old GC7000/GC7400 */
> +   else if (VIV_FEATURE(screen, chipMinorFeatures5, HALTI3))
> +      screen->specs.halti = 3; /* None? */
> +   else if (VIV_FEATURE(screen, chipMinorFeatures4, HALTI2))
> +      screen->specs.halti = 2; /* GC2500/GC3000/GC5000/GC6400 */
> +   else if (VIV_FEATURE(screen, chipMinorFeatures2, HALTI1))
> +      screen->specs.halti = 1; /* GC900/GC4000/GC7000UL */
> +   else if (VIV_FEATURE(screen, chipMinorFeatures1, HALTI0))
> +      screen->specs.halti = 0; /* GC880/GC2000/GC7000TM */
> +   else
> +      screen->specs.halti = -1; /* GC7000nanolite / pre-GC2000 except GC880 */
> +   if (screen->specs.halti >= 0)
> +      DBG("etnaviv: GPU arch: HALTI%d\n", screen->specs.halti);
> +   else
> +      DBG("etnaviv: GPU arch: pre-HALTI\n");
> +
>     screen->specs.can_supertile =
>        VIV_FEATURE(screen, chipMinorFeatures0, SUPER_TILED);
>     screen->specs.bits_per_tile =