[PATCH v2 1/2] dts: arm64: imx8mq: Enable gpu passive throttling

[Guido Günther]

Temperature and hysteresis were picked after the CPU.

Signed-off-by: Guido Günther <agx at sigxcpu.org>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 4fdd60f2c51e..5023a0e5068d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -235,12 +235,26 @@
 			thermal-sensors = <&tmu 1>;
 
 			trips {
+				gpu_alert: gpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
 				gpu-crit {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		vpu-thermal {
@@ -912,6 +926,7 @@
 			         <&clk IMX8MQ_CLK_GPU_AXI>,
 			         <&clk IMX8MQ_CLK_GPU_AHB>;
 			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
 			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
 			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
 			                  <&clk IMX8MQ_CLK_GPU_AXI>,
-- 
2.23.0.rc1