[PATCH v2] dt-bindings: display: Convert etnaviv to json-schema

[Benjamin GAIGNARD]

On 1/28/20 1:06 PM, Maxime Ripard wrote:
> Hi Benjamin,
>
> On Tue, Jan 28, 2020 at 09:20:13AM +0100, Benjamin Gaignard wrote:
>> Convert etnaviv bindings to yaml format.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
>> ---
>>   .../bindings/display/etnaviv/etnaviv-drm.txt       | 36 -----------
>>   .../devicetree/bindings/gpu/vivante,gc.yaml        | 72 ++++++++++++++++++++++
>>   2 files changed, 72 insertions(+), 36 deletions(-)
>>   delete mode 100644 Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
>>   create mode 100644 Documentation/devicetree/bindings/gpu/vivante,gc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
>> deleted file mode 100644
>> index 8def11b16a24..000000000000
>> --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
>> +++ /dev/null
>> @@ -1,36 +0,0 @@
>> -Vivante GPU core devices
>> -========================
>> -
>> -Required properties:
>> -- compatible: Should be "vivante,gc"
>> -  A more specific compatible is not needed, as the cores contain chip
>> -  identification registers at fixed locations, which provide all the
>> -  necessary information to the driver.
>> -- reg: should be register base and length as documented in the
>> -  datasheet
>> -- interrupts: Should contain the cores interrupt line
>> -- clocks: should contain one clock for entry in clock-names
>> -  see Documentation/devicetree/bindings/clock/clock-bindings.txt
>> -- clock-names:
>> -   - "bus":    AXI/master interface clock
>> -   - "reg":    AHB/slave interface clock
>> -               (only required if GPU can gate slave interface independently)
>> -   - "core":   GPU core clock
>> -   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
>> -
>> -Optional properties:
>> -- power-domains: a power domain consumer specifier according to
>> -  Documentation/devicetree/bindings/power/power_domain.txt
>> -
>> -example:
>> -
>> -gpu_3d: gpu at 130000 {
>> -	compatible = "vivante,gc";
>> -	reg = <0x00130000 0x4000>;
>> -	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
>> -	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
>> -	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
>> -	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
>> -	clock-names = "bus", "core", "shader";
>> -	power-domains = <&gpc 1>;
>> -};
>> diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
>> new file mode 100644
>> index 000000000000..c4f549c0d750
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
>> @@ -0,0 +1,72 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Vivante GPU Bindings
>> +
>> +description: Vivante GPU core devices
>> +
>> +maintainers:
>> +  -  Lucas Stach <l.stach at pengutronix.de>
>> +
>> +properties:
>> +  compatible:
>> +    const: vivante,gc
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    items:
>> +      - description: AXI/master interface clock
>> +      - description: GPU core clock
>> +      - description: Shader clock (only required if GPU has feature PIPE_3D)
>> +      - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
> Can you have an AHB slave interface clock without a shader clock?

No because the items in the list are ordered so you need to have, in 
order: "bus", "core", "shader", "reg"

If it is needed to allow any number of clock in any order I could write 
it like this:

clocks:

   minItems: 1

   maxItems: 4

clock-names:

   items:

     enum: [ bus, core, shader, reg]

   minItems: 1

   maxItems: 4

Benjamin

>
>> +    minItems: 2
>> +    maxItems: 4
>> +
>> +  clock-names:
>> +    items:
>> +      - const: bus
>> +      - const: core
>> +      - const: shader
>> +      - const: reg
>> +    minItems: 2
>> +    maxItems: 4
> If so, that check will fail, since it would expect a clock named
> shader on the 3rd item.
>
> It looks good otherwise, thanks!
> Maxime