[RFC PATCH 3/4] drm/etnaviv: Change order of enabling clocks to fix boot on i.MX8MM
Schrempf Frieder
frieder.schrempf at kontron.de
Wed May 6 11:27:10 UTC 2020
Hi Peng,
On 01.05.20 14:36, Peng Fan wrote:
>> Subject: Re: [RFC PATCH 3/4] drm/etnaviv: Change order of enabling clocks to
>> fix boot on i.MX8MM
>>
>> On 30.04.20 16:35, Lucas Stach wrote:
>>> Am Donnerstag, den 30.04.2020, 12:46 +0000 schrieb Schrempf Frieder:
>>>> From: Frieder Schrempf <frieder.schrempf at kontron.de>
>>>>
>>>> On some i.MX8MM devices the boot hangs when enabling the GPU clocks.
>>>> Changing the order of clock initalization to
>>>>
>>>> core -> shader -> bus -> reg
>>>>
>>>> fixes the issue. This is the same order used in the imx platform code
>>>> of the downstream GPU driver in the NXP kernel [1]. For the sake of
>>>> consistency we also adjust the order of disabling the clocks to the
>>>> reverse.
>>>>
>>>> [1]
>>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsou
>>>>
>> rce.codeaurora.org%2Fexternal%2Fimx%2Flinux-imx%2Ftree%2Fdrivers%2F
>> mx
>>>>
>> c%2Fgpu-viv%2Fhal%2Fos%2Flinux%2Fkernel%2Fplatform%2Ffreescale%2Fgc
>> _h
>>>>
>> al_kernel_platform_imx.c%3Fh%3Dimx_5.4.3_2.0.0%23n1538&data=02
>> %7C
>>>>
>> 01%7Cpeng.fan%40nxp.com%7Cdc7da53f665e4f567e3008d7ed1c27e0%7C6
>> 86ea1d3
>>>>
>> bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637238577497969787&sda
>> ta=QRHzu
>>>> C6gSKy%2F6y2FTRvlNF5t7DmJIvTgBESYKchI%2FDw%3D&reserved=0
>>>
>>> I don't see why the order of the clocks is important. Is this really a
>>> GPU issue? As in: does a GPU access hang when enabling the clocks in
>>> the wrong order? Or is this a clock driver issue with a clock access
>>> hanging due to an upstream clock still being disabled?
>>
>> Actually you might be right with this being a clock driver issue. The hanging
>> happens while enabling the clocks (unrelated to any GPU register access). The
>> strange thing is that most of the devices we have don't care and work as is
>> and some devices reliably fail each time when enabling the clocks in the
>> "wrong" order.
>>
>> So I guess this could indeed be some clock being enabled with an upstream
>> PLL not having locked yet or something.
>
> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatchwork.kernel.org%2Fcover%2F11433775%2F&data=02%7C01%7Cfrieder.schrempf%40kontron.de%7C1014be5f9b8b4d0c6e8108d7edcc5bde%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637239334279684748&sdata=UwVVzPEvNOP6I4g78uG5O9jVYmHwqyo6hj97wvtlzs0%3D&reserved=0
>
> Will this pachset help?
Thanks for the pointer. Unfortunately the clock patches don't help. I
tried with 5.7-rc4 and your patches on top and the issue still persists.
Also I found out that changing the order of the clock initialization as
proposed, does not fix the problem, either. On some boards it helps,
others still hang when the clocks are initialized.
Thanks,
Frieder
>
> The i.MX8M CCM root mux code in Linux needs a fix.
>
> Regards,
> Peng.
>
>>
>>>
>>> Regards,
>>> Lucas
>>>
>>>> Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
>>>> ---
>>>> drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 42
>> +++++++++++++--------------
>>>> 1 file changed, 21 insertions(+), 21 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
>>>> b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
>>>> index 7b138d4dd068..424b2e5951f0 100644
>>>> --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
>>>> +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
>>>> @@ -1487,55 +1487,55 @@ static int etnaviv_gpu_clk_enable(struct
>> etnaviv_gpu *gpu)
>>>> {
>>>> int ret;
>>>>
>>>> - if (gpu->clk_reg) {
>>>> - ret = clk_prepare_enable(gpu->clk_reg);
>>>> + if (gpu->clk_core) {
>>>> + ret = clk_prepare_enable(gpu->clk_core);
>>>> if (ret)
>>>> return ret;
>>>> }
>>>>
>>>> - if (gpu->clk_bus) {
>>>> - ret = clk_prepare_enable(gpu->clk_bus);
>>>> + if (gpu->clk_shader) {
>>>> + ret = clk_prepare_enable(gpu->clk_shader);
>>>> if (ret)
>>>> - goto disable_clk_reg;
>>>> + goto disable_clk_core;
>>>> }
>>>>
>>>> - if (gpu->clk_core) {
>>>> - ret = clk_prepare_enable(gpu->clk_core);
>>>> + if (gpu->clk_bus) {
>>>> + ret = clk_prepare_enable(gpu->clk_bus);
>>>> if (ret)
>>>> - goto disable_clk_bus;
>>>> + goto disable_clk_shader;
>>>> }
>>>>
>>>> - if (gpu->clk_shader) {
>>>> - ret = clk_prepare_enable(gpu->clk_shader);
>>>> + if (gpu->clk_reg) {
>>>> + ret = clk_prepare_enable(gpu->clk_reg);
>>>> if (ret)
>>>> - goto disable_clk_core;
>>>> + goto disable_clk_bus;
>>>> }
>>>>
>>>> return 0;
>>>>
>>>> -disable_clk_core:
>>>> - if (gpu->clk_core)
>>>> - clk_disable_unprepare(gpu->clk_core);
>>>> disable_clk_bus:
>>>> if (gpu->clk_bus)
>>>> clk_disable_unprepare(gpu->clk_bus);
>>>> -disable_clk_reg:
>>>> - if (gpu->clk_reg)
>>>> - clk_disable_unprepare(gpu->clk_reg);
>>>> +disable_clk_shader:
>>>> + if (gpu->clk_shader)
>>>> + clk_disable_unprepare(gpu->clk_shader);
>>>> +disable_clk_core:
>>>> + if (gpu->clk_core)
>>>> + clk_disable_unprepare(gpu->clk_core);
>>>>
>>>> return ret;
>>>> }
>>>>
>>>> static int etnaviv_gpu_clk_disable(struct etnaviv_gpu *gpu)
>>>> {
>>>> + if (gpu->clk_reg)
>>>> + clk_disable_unprepare(gpu->clk_reg);
>>>> + if (gpu->clk_bus)
>>>> + clk_disable_unprepare(gpu->clk_bus);
>>>> if (gpu->clk_shader)
>>>> clk_disable_unprepare(gpu->clk_shader);
>>>> if (gpu->clk_core)
>>>> clk_disable_unprepare(gpu->clk_core);
>>>> - if (gpu->clk_bus)
>>>> - clk_disable_unprepare(gpu->clk_bus);
>>>> - if (gpu->clk_reg)
>>>> - clk_disable_unprepare(gpu->clk_reg);
>>>>
>>>> return 0;
>>>> }
>>>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C01%7Cfrieder.schrempf%40kontron.de%7C1014be5f9b8b4d0c6e8108d7edcc5bde%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637239334279684748&sdata=kpx6LDA6QXgR3CPGsugEIIDt2YbZuJTC7%2FxrRsDhtok%3D&reserved=0
>
More information about the etnaviv
mailing list