[fprint] AuthenTec AES1660 (08ff:168b)

[Petr Dlouhý]

Hi,

I started working on deciphering the protocol for my AES1660 (identified by 08ff:1680) few months ago. I didn't have time for that lately, but I am planning to get back to work. However if somebody wants to finish it, I can give him all the information I explored about the protocol.

Massi, you are the first one who has different sensor with AES1660 chip. I am very interested in the logs for your sensor to see the protocol differences between this two devices. Please read Fprint wiki and make the logs of the protocol in action.

> ------------ Původní zpráva ------------
> Od: Massi Ergosum <massi.ergosum at gmail.com>
> Předmět: [fprint] AuthenTec AES1660 (08ff:168b)
> Datum: 06.8.2011 15:35:38
> ----------------------------------------
> Hi all,
> I'm new in this mailing-list. I have a Toshiba Tecra S11-M15 with the
> following device:
> 
> $ lsusb | grep -i auth
> Bus 001 Device 003: ID 08ff:168b AuthenTec, Inc.
> 
> I'm a Fedora user, this is my environment
> 
> $ uname -r
> 2.6.35.13-92.fc14.x86_64
> $ rpm -q libfprint
> libfprint-0.3.0-1.fc14.x86_64
> 
> According with the manufacturer
> (http://support.authentec.com/KnowledgeBase/KBview/tabid/843/ArticleId/299/Identifying-your-Fingerprint-Sensor-Model.aspx)
> this is a AES1660 sensor. Is there any way to make it working with
> libfprint?
> 
> Regards,
> Massimiliano
> _______________________________________________
> fprint mailing list
> fprint at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/fprint
> 
> 
> 

Petr Dlouhý
petr.dlouhy at email.cz