[fprint] vfs5011 support

[Vasily Khoruzhick]

Hi Frank,

Please try to compile and test libfprint from
https://github.com/anarsoul/libfprint

I have no vfs5011 hardware, and I'd like to be sure that everything
from git master is working before pushing it to fd.o and asking
Bastien to make a release.

Thanks!

Regards,
Vasily

On Thu, Dec 18, 2014 at 11:52 PM, Dr. No
<bartsimpson at betriebsdirektor.de> wrote:
> Hi Vasily,
> yes the patch apply to the 0.5.1 version.
> My system is an Fedora 21.
>
> I can't seen any crashes, only USB errors:
>
> wrong finger:
> Dez 18 21:33:44 XXXXXX dbus[999]: [system] Activating via systemd:
> service name='net.reactivated.Fprint' unit='fprintd.service'
> Dez 18 21:33:44 XXXXXX dbus[999]: [system] Successfully activated
> service 'net.reactivated.Fprint'
> Dez 18 21:33:44 XXXXXX fprintd[3524]: Launching FprintObject
> Dez 18 21:33:44 XXXXXX fprintd[3524]: ** Message: D-Bus service launched
> with name: net.reactivated.Fprint
> Dez 18 21:33:44 XXXXXX fprintd[3524]: ** Message: entering main loop
> Dez 18 21:33:44 XXXXXX fprintd[3524]: ** Message: user 'frank' claiming
> the device: 0
> Dez 18 21:33:45 XXXXXX fprintd[3524]: ** Message: now monitoring fd 15
> Dez 18 21:33:45 XXXXXX kernel: usb 2-7: reset full-speed USB device
> number 3 using xhci_hcd
> Dez 18 21:33:45 XXXXXX kernel: xhci_hcd 0000:00:14.0: Setup ERROR: setup
> context command for slot 2.
> Dez 18 21:33:45 XXXXXX kernel: usb 2-7: hub failed to enable device,
> error -22
> Dez 18 21:33:45 XXXXXX kernel: usb 2-7: reset full-speed USB device
> number 3 using xhci_hcd
> Dez 18 21:33:45 XXXXXX kernel: xhci_hcd 0000:00:14.0: Setup ERROR: setup
> context command for slot 2.
> Dez 18 21:33:45 XXXXXX kernel: usb 2-7: hub failed to enable device,
> error -22
> Dez 18 21:33:45 XXXXXX kernel: usb 2-7: reset full-speed USB device
> number 3 using xhci_hcd
> Dez 18 21:33:45 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b400
> Dez 18 21:33:45 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b448
> Dez 18 21:33:45 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b490
> Dez 18 21:33:45 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b4d8
> Dez 18 21:33:46 XXXXXX fprintd[3524]: ** Message: device 0 claim status 0
> Dez 18 21:33:46 XXXXXX fprintd[3524]: ** Message: adding finger 7 to the
> gallery
> Dez 18 21:33:46 XXXXXX fprintd[3524]: ** Message: start identification
> device 0
> Dez 18 21:33:46 XXXXXX kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for
> slot 2 ep 4 with no TDs queued?
> Dez 18 21:34:35 XXXXXX kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for
> slot 2 ep 4 with no TDs queued?
> Dez 18 21:34:35 XXXXXX fprintd[3524]: ** Message: identify_cb: result
> verify-no-match (0)
> Dez 18 21:34:35 XXXXXX fprintd[3524]: ** Message: no longer monitoring fd 15
> Dez 18 21:34:35 XXXXXX fprintd[3524]: ** Message: released device 0
> Dez 18 21:35:05 XXXXXX fprintd[3524]: ** Message: No devices in use, exit
>
>
> right finger:
> Dez 18 21:36:27 XXXXXX fprintd[3546]: ** Message: user 'frank' claiming
> the device: 0
> Dez 18 21:36:27 XXXXXX fprintd[3546]: ** Message: now monitoring fd 15
> Dez 18 21:36:27 XXXXXX kernel: usb 2-7: reset full-speed USB device
> number 3 using xhci_hcd
> Dez 18 21:36:27 XXXXXX kernel: xhci_hcd 0000:00:14.0: Setup ERROR: setup
> context command for slot 2.
> Dez 18 21:36:27 XXXXXX kernel: usb 2-7: hub failed to enable device,
> error -22
> Dez 18 21:36:27 XXXXXX kernel: usb 2-7: reset full-speed USB device
> number 3 using xhci_hcd
> Dez 18 21:36:27 XXXXXX kernel: xhci_hcd 0000:00:14.0: Setup ERROR: setup
> context command for slot 2.
> Dez 18 21:36:27 XXXXXX kernel: usb 2-7: hub failed to enable device,
> error -22
> Dez 18 21:36:28 XXXXXX kernel: usb 2-7: reset full-speed USB device
> number 3 using xhci_hcd
> Dez 18 21:36:28 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b400
> Dez 18 21:36:28 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b448
> Dez 18 21:36:28 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b490
> Dez 18 21:36:28 XXXXXX kernel: xhci_hcd 0000:00:14.0: xHCI
> xhci_drop_endpoint called with disabled ep ffff880424b5b4d8
> Dez 18 21:36:28 XXXXXX fprintd[3546]: ** Message: device 0 claim status 0
> Dez 18 21:36:28 XXXXXX fprintd[3546]: ** Message: adding finger 7 to the
> gallery
> Dez 18 21:36:28 XXXXXX fprintd[3546]: ** Message: start identification
> device 0
> Dez 18 21:36:28 XXXXXX kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for
> slot 2 ep 4 with no TDs queued?
> Dez 18 21:36:29 XXXXXX kernel: xhci_hcd 0000:00:14.0: WARN Event TRB for
> slot 2 ep 4 with no TDs queued?
> Dez 18 21:36:29 XXXXXX fprintd[3546]: ** Message: identify_cb: result
> verify-match (1)
> Dez 18 21:36:29 XXXXXX fprintd[3546]: ** Message: no longer monitoring fd 15
> Dez 18 21:36:29 XXXXXX fprintd[3546]: ** Message: released device 0
>
>
> Regards,
> Frank
>
> Am 18.12.2014 um 21:20 schrieb Vasily Khoruzhick:
>> Hi Frank,
>>
>> I've just got a report at
>> https://bugs.freedesktop.org/show_bug.cgi?id=61692 that it doesn't
>> work.
>> Did you actually test it?
>>
>> Regards,
>> Vasily
>
>>>
>