[fprint] DM PD061 USB flash drive with fingerprint reader
Vovan K
v at robolab.it
Tue Sep 27 14:42:17 UTC 2016
Hello,
the "DM PD061" flash drive integrated fingerprint reader is not recognized.
Device home pages:
(EN) http://www.dmlife.cc/productshow.asp?id=1067&sid=289
(CN) http://www.dmlife.cn/xinwen.asp?id=157
dmesg:
[1389245.417078] usb 3-2: new high-speed USB device number 7 using xhci_hcd
[1389245.581966] usb 3-2: New USB device found, idVendor=8644, idProduct=8005
[1389245.581969] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1389245.581971] usb 3-2: Product: USB Flash Disk
[1389245.581973] usb 3-2: Manufacturer: General
[1389245.581974] usb 3-2: SerialNumber: 150100000000C533
[1389245.582698] usb-storage 3-2:1.0: USB Mass Storage device detected
[1389245.583093] scsi12 : usb-storage 3-2:1.0
[1389246.586493] scsi 12:0:0:0: Direct-Access General USB Flash Disk 1.00 PQ: 0 ANSI: 2
[1389246.588171] sd 12:0:0:0: Attached scsi generic sg2 type 0
[1389246.590348] scsi 12:0:0:1: Direct-Access General USB Flash Disk 1.00 PQ: 0 ANSI: 2
[1389246.590913] sd 12:0:0:1: Attached scsi generic sg3 type 0
[1389246.592456] sd 12:0:0:0: [sdb] 21213440 512-byte logical blocks: (10.8 GB/10.1 GiB)
[1389246.594069] scsi 12:0:0:2: CD-ROM General USB Flash Disk 1.00 PQ: 0 ANSI: 2
[1389246.594681] sd 12:0:0:0: [sdb] Write Protect is off
[1389246.594686] sd 12:0:0:0: [sdb] Mode Sense: 03 00 00 00
[1389246.596354] sd 12:0:0:0: [sdb] No Caching mode page found
[1389246.596360] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[1389246.597230] sd 12:0:0:1: [sdc] Attached SCSI removable disk
[1389246.598575] sr1: scsi-1 drive
[1389246.598771] sr 12:0:0:2: Attached scsi CD-ROM sr1
[1389246.598893] sr 12:0:0:2: Attached scsi generic sg4 type 5
[1389246.613041] sdb: sdb1
[1389246.625952] sd 12:0:0:0: [sdb] Attached SCSI removable disk
# lsusb -v -d 8644:8005
Bus 003 Device 012: ID 8644:8005
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x8644
idProduct 0x8005
bcdDevice 1.00
iManufacturer 1 General
iProduct 2 USB Flash Disk
iSerial 3 150100000000C533
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Unfortunately the manufacturer provides only Windows drivers and software.
Contents of the Virtual CD drive: http://myfiles.pro/uploads/1122035355.DM_PD061.zip
usbmon sniffer log: http://myfiles.pro/uploads/1897011908.3.mon.out.zip
Nothing new appears in usbmon log when I touch the fingerprint reader.
However there is some sort of heartbeat sent to(from?) device every 1-2 seconds. In this log I have separated the heartbeats from the remaining part with a few newlines: http://myfiles.pro/uploads/1850057838.divided.zip
Best regards,
V
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/fprint/attachments/20160927/f8e10090/attachment.html>
More information about the fprint
mailing list