<!DOCTYPE html> <html><head> <meta charset="UTF-8"> </head><body>Hi, it seems as if it worked when I swiped my finger over the reader in a natural length (before I just tapped it). This is the output: fp:debug [fp_init] fp:debug [register_driver] registered driver upekts fp:debug [register_driver] registered driver aes3500 fp:debug [register_driver] registered driver aes4000 fp:debug [register_driver] registered driver aes2501 fp:debug [register_driver] registered driver aes2550 fp:debug [register_driver] registered driver uru4000 fp:debug [register_driver] registered driver vcom5s fp:debug [register_driver] registered driver upeksonly fp:debug [register_driver] registered driver aes1610 fp:debug [register_driver] registered driver aes1660 fp:debug [register_driver] registered driver aes2660 fp:debug [register_driver] registered driver vfs101 fp:debug [register_driver] registered driver vfs301 fp:debug [register_driver] registered driver vfs5011 fp:debug [register_driver] registered driver upektc fp:debug [register_driver] registered driver upektc_img fp:debug [register_driver] registered driver etes603 fp:debug [register_driver] registered driver vfs0050 fp:debug [register_driver] registered driver elan fp:debug [find_supporting_driver] driver elan supports USB device 04f3:0c1a fp:debug [find_supporting_driver] selected driver elan supports USB device 04f3:0c1a Found device claimed by ElanTech Fingerprint Sensor driver sync:debug [fp_dev_open] async:debug [fp_async_dev_open] elan:debug [dev_init] async:debug [fpi_drvcb_open_complete] status 0 sync:debug [sync_open_cb] status 0 Opened device. It's now time to scan your finger.sync:debug [fp_dev_img_capture] to be handled by elan async:debug [fp_async_capture_start] fp:debug [generic_acquire_start] action 4 elan:debug [elan_reset_sensor] elan:debug [elan_dev_reset] drv:debug [__ssm_call_handler] 0x5596f9a7ac70 entering state 0 elan:debug [elan_run_cmd] 4011 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_read] skipping read, not expecting anything elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7ac70 entering state 1 poll:debug [fpi_timeout_add] in 5ms poll:debug [get_next_timeout_expiry] next timeout in 0.004974s poll:debug [get_next_timeout_expiry] next timeout in 0.004951s poll:debug [get_next_timeout_expiry] first timeout already expired poll:debug [handle_timeout] drv:debug [__ssm_call_handler] 0x5596f9a7ac70 entering state 2 elan:debug [elan_run_cmd] 4014 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_read] skipping read, not expecting anything elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7ac70 entering state 3 elan:debug [elan_run_cmd] 4013 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [fpi_ssm_mark_completed] 0x5596f9a7ac70 completed with status 0 elan:debug [reset_sensor_complete] elan:debug [elan_activate] elan:debug [elan_dev_reset] drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 0 elan:debug [activate_run_state] elan:debug [elan_run_cmd] 4019 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 1 elan:debug [activate_run_state] elan:debug [activate_run_state] FW ver 1.66 drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 2 elan:debug [activate_run_state] elan:debug [elan_run_cmd] 000c elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 3 elan:debug [activate_run_state] elan:debug [activate_run_state] sensor dimensions, WxH: 144x64 drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 4 elan:debug [activate_run_state] elan:debug [elan_run_cmd] 402a elan:debug [elan_run_cmd] skipping for this device elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 5 elan:debug [activate_run_state] elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 6 elan:debug [activate_run_state] elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7b5c0 entering state 7 elan:debug [activate_run_state] elan:debug [elan_run_cmd] 4024 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [fpi_ssm_mark_completed] 0x5596f9a7b5c0 completed with status 0 elan:debug [activate_complete] elan:debug [elan_need_calibration] elan:debug [elan_need_calibration] calibration mean: 7632, bg mean: 7696, delta: 64 fp:debug [fpi_imgdev_activate_complete] status 0 async:debug [fpi_drvcb_capture_started] elan:debug [elan_capture] elan:debug [elan_dev_reset] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 0 elan:debug [elan_run_cmd] 4031 elan:debug [elan_run_cmd] skipping for this device elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 2 fp:debug [fpi_imgdev_report_finger_status] finger on sensor fp:debug [fpi_imgdev_report_finger_status] ignoring status report elan:debug [elan_run_cmd] 0009 elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_done] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 3 elan:debug [elan_save_frame] drv:debug [__ssm_call_handler] 0x5596f9a7e120 entering state 1 elan:debug [elan_run_cmd] 403f elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_cb] elan:debug [elan_cmd_cb] transfer timed out drv:debug [fpi_ssm_mark_aborted] error -110 from state 1 drv:debug [fpi_ssm_mark_completed] 0x5596f9a7e120 completed with status -110 elan:debug [capture_complete] elan:debug [elan_submit_image] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] elan:debug [elan_process_frame] assembling:debug [do_movement_estimation] calc delta completed in 0.389106 secs assembling:debug [do_movement_estimation] calc delta completed in 0.352891 secs assembling:debug [fpi_do_movement_estimation] errors: 175174 rev: 208118 assembling:debug [do_movement_estimation] calc delta completed in 0.359523 secs assembling:debug [fpi_assemble_frames] height is 208 fp:debug [fpi_img_new] length=58752 fp:debug [fpi_imgdev_image_captured] fp:debug [fpi_imgdev_report_finger_status] finger removed async:debug [fpi_drvcb_report_capture_result] result 0 sync:debug [fp_dev_img_capture] result: complete sync:debug [fp_dev_img_capture] ending capture async:debug [fp_async_capture_stop] elan:debug [elan_deactivate] elan:debug [elan_dev_reset] drv:debug [__ssm_call_handler] 0x5596f9a82860 entering state 0 elan:debug [deactivate_run_state] elan:debug [elan_run_cmd] 000b elan:debug [elan_cmd_cb] elan:debug [elan_cmd_read] elan:debug [elan_cmd_read] skipping read, not expecting anything elan:debug [elan_cmd_done] drv:debug [fpi_ssm_mark_completed] 0x5596f9a82860 completed with status 0 elan:debug [deactivate_complete] fp:debug [fpi_imgdev_deactivate_complete] async:debug [fpi_drvcb_capture_stopped] sync:debug [capture_stop_cb] fp:debug [fp_img_save_to_file] written to 'finger.pgm' fp:debug [fp_img_save_to_file] written to 'finger_standardized.pgm' sync:debug [fp_dev_close] elan:debug [dev_deinit] elan:debug [elan_dev_reset] async:debug [fpi_drvcb_close_complete] sync:debug [sync_close_cb] fp:debug [fp_exit] I'd still like to know though how I can actually use the driver now. Is there a UI I can install? Regards Timo <blockquote type="cite">Igor Filatov <ia.filatov@gmail.com> hat am 27. Januar 2018 um 17:19 geschrieben: <div dir="ltr">Hi Timo, thanks for the logs!<div> </div><div>Note to self: next time check spam folder when waiting for someone's logs.</div><div> </div><div>Yes, it works, but your log shows that only 2 frames were captured. The driver wants no less than 7 which is why capture has failed. Try a longer swipe.</div><div> </div><div>On a side note, The number is semi-arbitrary and I've picked it for my device with the same narrow 64px sensor. It could make sense having a smaller minimum for 96x96 sensors. So I'm asking you, gentlemen, to please try and see how many frames are ok for a natural swipe on your devices. Observe the size of the resulting image relative to the finger size and the number of minutiae.</div><div> </div><div>4031 turns on the LED. It's not needed on devices without one.</div><div> </div><div>On another side note, day-to-day usage shows that sometimes a blinking LED is the only indication that you need to scan your finger now...</div><div> </div><div> <div> <div class="ox-665816ec38-gmail_quote"><div dir="ltr">On Sat, Jan 27, 2018 at 5:38 PM TeEmZe < <a href="mailto:timo@teemze.de">timo@teemze.de</a>> wrote: </div><blockquote><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">Hi, Just for the case that the output of elanfp.c is still relevant: </div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1"> Device with vid 4f3 pid c1a found.Config number is 1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD RESET sentCMD Fuse Load sentCMD VERSION sent</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">FP Bridge FW Version 1.66</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Image Size sent</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">Width x Height = 64x144CMD Get Calibration Mean sentcalibration mean value: 7562 (0x1d8a)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 7562 (0x1d8a)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 7562 (0x1d8a)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 7562 (0x1d8a)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 7562 (0x1d8a)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 16383 (0x3fff)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 16383 (0x3fff)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 16383 (0x3fff)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 16383 (0x3fff)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 16383 (0x3fff)CMD CALIBRATION sentCalibration Status: 0x1</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD STATUS sentStatus: 0xff</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Calibration Mean sentcalibration mean value: 2 (0x2)</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Wait For Finger sent</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">Received 0xa0</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">CMD Get Image sentReceived 18432 </div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">It’s true that I said that 4031 was called before 403F, which actually was the case - here are my notes regarding this: -> 4031 ?-> 403F Get Pre-Scan<- 55 1.3.3 Object-> 4031 ?-> 0009 Get Image Data<- ? 1.3.2 Image Data-> 0009 Get Image Data<- ? 1.3.2 Image Data-> 0009...-> 4031-> 403F<- 55 1.3.3-> 4031-> 0009<- ? 1.3.2...-> 4031-> 403F<- 55 1.3.3...-> 4031-> 0009<- ?-> 000b-> 0009<- ?-> 4031...-> 0009<- ?-> 000b Stop</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1"> You say that it works – so haw exactly can I use it then? I guess it won’t do to simply install fprint from the package library, as it won’t have the newest driver for my device? Regards Timo </div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1">-----Original Message----- From: Sebastien Bechet [mailto:<a href="mailto:sebastien.bechet@osinix.com" target="_blank" rel="noopener">sebastien.bechet@osinix.com</a>] Sent: Saturday, 27 January 2018 15:43 To: Meta Colon <<a href="mailto:timo@teemze.de" target="_blank" rel="noopener">timo@teemze.de</a>>; Igor Filatov <<a href="mailto:ia.filatov@gmail.com" target="_blank" rel="noopener">ia.filatov@gmail.com</a>> Cc: Hans de Goede <<a href="mailto:hdegoede@redhat.com" target="_blank" rel="noopener">hdegoede@redhat.com</a>>; <a href="mailto:konachan.700@gmail.com" target="_blank" rel="noopener">konachan.700@gmail.com</a>; <a href="mailto:fprint@lists.freedesktop.org" target="_blank" rel="noopener">fprint@lists.freedesktop.org</a> Subject: Re: [fprint] elan patch + poc 0x903 and 0x0C03</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1"> Hello Timo,</div></div><div><div class="ox-665816ec38-m_3021745750958938952WordSection1"> Le samedi 27 janvier 2018 à 13:40 +0100, Meta Colon a écrit :> fp:debug [find_supporting_driver] driver elan supports USB device> > 04f3:0c1a> > elan:debug [activate_run_state] FW ver 1.66 elan:debug > > [activate_run_state] sensor dimensions, WxH: 144x64 Ok, I record your informations in README.md. > > elan:debug [elan_run_cmd] 4031> > elan:debug [elan_run_cmd] skipping for this device It seems to me you said 4031 was called before 403F in your windows usb trace? > I guess this means that it works? Yes. > elanfp.c however had the output (after I properly installed / executed > it):> Device with vid 4f3 pid c1a found.> Error 5> Which seems to mean, that the reader couldn't be opened? You can run it with root account. But elanfp.c are not important now.Thank you for your log with Igor driver. </div></div></blockquote></div></div></div></div></blockquote></body></html>