[Freedreno] [PATCH 4/6] drm/msm: Use TTBR1 for kernel side GPU buffer objects

[Jordan Crouse]

Use a TTBR1 pagetable for the GPU IOMMU domain and map all
the GPU kernel side buffer objects into that range.  This
will make it easier to switch out TTBR0 for per-process
pagetables.

Signed-off-by: Jordan Crouse <jcrouse at codeaurora.org>
---
 drivers/gpu/drm/msm/adreno/adreno_gpu.c | 18 ++++++++++++++++--
 drivers/gpu/drm/msm/msm_iommu.c         |  7 +++++++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index b41bd88..d7864ac 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -418,8 +418,22 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
 	adreno_gpu_config.ioname = "kgsl_3d0_reg_memory";
 	adreno_gpu_config.irqname = "kgsl_3d0_irq";
 
-	adreno_gpu_config.va_start = SZ_16M;
-	adreno_gpu_config.va_end = 0xffffffff;
+	if (adreno_gpu->revn >= 500) {
+		/*
+		 * By default map all A5XX buffers into the TTBR1 va space.
+		 * If per-instance pagetables are used then they will
+		 * use their own address space and the default domain will only
+		 * be used for kernel buffers. If per-instance pagetables aren't
+		 * enabled then we'll end up using the TTBR1 range as the
+		 * default global pagetable but that's okay because we have
+		 * plenty of room.
+		 */
+		adreno_gpu_config.va_start = 0xfffffff800000000ULL;
+		adreno_gpu_config.va_end =   0xfffffff8ffffffffULL;
+	} else {
+		adreno_gpu_config.va_start = SZ_16M;
+		adreno_gpu_config.va_end = 0xffffffff;
+	}
 
 	adreno_gpu_config.nr_rings = nr_rings;
 
diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c
index c1bfc92..cc82410 100644
--- a/drivers/gpu/drm/msm/msm_iommu.c
+++ b/drivers/gpu/drm/msm/msm_iommu.c
@@ -83,6 +83,13 @@ static int msm_iommu_v2_attach(struct msm_mmu *mmu, const char * const *names,
 			       int cnt)
 {
 	struct msm_iommu *iommu = to_msm_iommu(mmu);
+	int val = 1;
+
+	/* Use TTBR1 if it exists */
+	/* FIXME: This should only be for GPU and in theory only for A5XX */
+
+	iommu_domain_set_attr(iommu->domain, DOMAIN_ATTR_ENABLE_TTBR1,
+		&val);
 
 	return iommu_attach_device(iommu->domain, mmu->dev);
 }
-- 
1.9.1