[Freedreno] [PATCH 3/3] drm/msm/adreno: deal with linux-firmware fw paths
Rob Clark
robdclark at gmail.com
Mon Oct 16 15:27:49 UTC 2017
When firmware was added to linux-firmware, it was put in a qcom sub-
directory, unlike what we'd been using before. For a300_pfp.fw and
a300_pm4.fw symlinks were created, but we'd prefer not to have to do
this in the future. So add support to look in both places when
loading firmware.
Signed-off-by: Rob Clark <robdclark at gmail.com>
---
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 64 ++++++++++++++++++++++++++++++---
drivers/gpu/drm/msm/adreno/adreno_gpu.h | 21 +++++++++++
2 files changed, 81 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 19e12380297e..dc0db660c617 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -69,12 +69,68 @@ adreno_request_fw(struct adreno_gpu *adreno_gpu, const char *fwname)
{
struct drm_device *drm = adreno_gpu->base.dev;
const struct firmware *fw = NULL;
+ char newname[strlen("qcom/") + strlen(fwname) + 1];
int ret;
- ret = request_firmware(&fw, fwname, drm->dev);
- if (ret) {
- dev_err(drm->dev, "failed to load %s: %d\n", fwname, ret);
- return ERR_PTR(ret);
+ sprintf(newname, "qcom/%s", fwname);
+
+ /*
+ * Try first to load from qcom/$fwfile using a direct load (to avoid
+ * a potential timeout waiting for usermode helper)
+ */
+ if ((adreno_gpu->fwloc == FW_LOCATION_UNKNOWN) ||
+ (adreno_gpu->fwloc == FW_LOCATION_NEW)) {
+
+ ret = request_firmware_direct(&fw, newname, drm->dev);
+ if (!ret) {
+ dev_info(drm->dev, "loaded %s from new location\n",
+ newname);
+ adreno_gpu->fwloc = FW_LOCATION_NEW;
+ return fw;
+ } else if (adreno_gpu->fwloc != FW_LOCATION_UNKNOWN) {
+ dev_err(drm->dev, "failed to load %s: %d\n",
+ newname, ret);
+ return ERR_PTR(ret);
+ }
+ }
+
+ /*
+ * Then try the legacy location without qcom/ prefix
+ */
+ if ((adreno_gpu->fwloc == FW_LOCATION_UNKNOWN) ||
+ (adreno_gpu->fwloc == FW_LOCATION_LEGACY)) {
+
+ ret = request_firmware_direct(&fw, fwname, drm->dev);
+ if (!ret) {
+ dev_info(drm->dev, "loaded %s from legacy location\n",
+ newname);
+ adreno_gpu->fwloc = FW_LOCATION_LEGACY;
+ return fw;
+ } else if (adreno_gpu->fwloc != FW_LOCATION_UNKNOWN) {
+ dev_err(drm->dev, "failed to load %s: %d\n",
+ fwname, ret);
+ return ERR_PTR(ret);
+ }
+ }
+
+ /*
+ * Finally fall back to request_firmware() for cases where the
+ * usermode helper is needed (I think mainly android)
+ */
+ if ((adreno_gpu->fwloc == FW_LOCATION_UNKNOWN) ||
+ (adreno_gpu->fwloc == FW_LOCATION_HELPER)) {
+
+ ret = request_firmware(&fw, newname, drm->dev);
+ if (!ret) {
+ dev_info(drm->dev, "loaded %s with helper\n",
+ newname);
+ adreno_gpu->fwloc = FW_LOCATION_HELPER;
+ return fw;
+ } else if (adreno_gpu->fwloc != FW_LOCATION_UNKNOWN) {
+ dev_err(drm->dev, "failed to load %s: %d\n",
+ newname, ret);
+ return ERR_PTR(ret);
+ }
}
return fw;
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
index 3eda98af546e..b8c22658929d 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
@@ -101,6 +101,27 @@ struct adreno_gpu {
/* interesting register offsets to dump: */
const unsigned int *registers;
+ /*
+ * Are we loading fw from legacy path? Prior to addition
+ * of gpu firmware to linux-firmware, the fw files were
+ * placed in toplevel firmware directory, following qcom's
+ * android kernel. But linux-firmware preferred they be
+ * placed in a 'qcom' subdirectory.
+ *
+ * For backwards compatibility, we try first to load from
+ * the new path, using request_firmware_direct() to avoid
+ * any potential timeout waiting for usermode helper, then
+ * fall back to the old path (with direct load). And
+ * finally fall back to request_firmware() with the new
+ * path to allow the usermode helper.
+ */
+ enum {
+ FW_LOCATION_UNKNOWN = 0,
+ FW_LOCATION_NEW, /* /lib/firmware/qcom/$fwfile */
+ FW_LOCATION_LEGACY, /* /lib/firmware/$fwfile */
+ FW_LOCATION_HELPER,
+ } fwloc;
+
/* firmware: */
const struct firmware *pm4, *pfp;
--
2.13.6
More information about the Freedreno
mailing list