[Freedreno] [RFC] drm/atomic+msm: add helper to implement legacy dirtyfb
Daniel Vetter
daniel at ffwll.ch
Wed Apr 4 17:56:37 UTC 2018
On Wed, Apr 4, 2018 at 7:41 PM, Noralf Trønnes <noralf at tronnes.org> wrote:
>
>
> Den 04.04.2018 00.42, skrev Rob Clark:
>>
>> Add an atomic helper to implement dirtyfb support. This is needed to
>> support DSI command-mode panels with x11 userspace (ie. when we can't
>> rely on pageflips to trigger a flush to the panel).
>>
>> To signal to the driver that the async atomic update needs to
>> synchronize with fences, even though the fb didn't change, the
>> drm_atomic_state::dirty flag is added.
>>
>> Signed-off-by: Rob Clark <robdclark at gmail.com>
>> ---
>> Background: there are a number of different folks working on getting
>> upstream kernel working on various different phones/tablets with qcom
>> SoC's.. many of them have command mode panels, so we kind of need a
>> way to support the legacy dirtyfb ioctl for x11 support.
>>
>> I know there is work on a proprer non-legacy atomic property for
>> userspace to communicate dirty-rect(s) to the kernel, so this can
>> be improved from triggering a full-frame flush once that is in
>> place. But we kinda needa a stop-gap solution.
>>
>> I had considered an in-driver solution for this, but things get a
>> bit tricky if userspace ands up combining dirtyfb ioctls with page-
>> flips, because we need to synchronize setting various CTL.FLUSH bits
>> with setting the CTL.START bit. (ie. really all we need to do for
>> cmd mode panels is bang CTL.START, but is this ends up racing with
>> pageflips setting FLUSH bits, then bad things.) The easiest soln
>> is to wrap this up as an atomic commit and rely on the worker to
>> serialize things. Hence adding an atomic dirtyfb helper.
>>
>> I guess at least the helper, with some small addition to translate
>> and pass-thru the dirty rect(s) is useful to the final atomic dirty-
>> rect property solution. Depending on how far off that is, a stop-
>> gap solution could be useful.
>
>
> I have been waiting for someone to address this since I'm not skilled
> enough myself to tackle the atomic machinery. It would be be nice to do
> all flushing during commit since that would mean that the tinydrm drivers
> could be driven solely through drm_simple_display_pipe_funcs. I wouldn't
> have to wire through the dirty callback like I do now.
>
> I see that you use a nonblocking commit. What happens if a new dirtyfb
> comes in before the previous is done?
We could reuse the same trick we're doing in the fbdev code, of
pushing the commit to a worker and doing it in a blocking fashion. Or
at least wait for it to finish (can be done with the crtc_state->event
stuff). That way userspace can pile us up in dirtyfb calls, but we'd
do at most one per frame. More isn't really useful anyway.
> If we could save the dirty clips, then I could use this in tinydrm.
> A full flush over SPI takes ~50ms so I need to shave off where I can.
>
> This works for me in my tinydrm world:
One thing I thought you've had around somewhere is some additional
tracking code, so we don't have to take all the plane mutexes in the
->dirtyfb callback. Does that exist, or was that just a figment of my
imagination?
> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> index c64225274807..218cb36757fa 100644
> --- a/include/drm/drm_plane.h
> +++ b/include/drm/drm_plane.h
> @@ -28,6 +28,7 @@
> #include <drm/drm_mode_object.h>
> #include <drm/drm_color_mgmt.h>
>
> +struct drm_clip_rect;
> struct drm_crtc;
> struct drm_printer;
> struct drm_modeset_acquire_ctx;
> @@ -85,6 +86,9 @@ struct drm_plane_state {
> */
> bool dirty;
>
> + struct drm_clip_rect *dirty_clips;
> + unsigned int num_dirty_clips;
> +
> /**
> * @fence:
> *
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c
> b/drivers/gpu/drm/drm_atomic_helper.c
> index 8066c508ab50..e00b8247b7c5 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -3521,6 +3521,8 @@ void __drm_atomic_helper_plane_duplicate_state(struct
> drm_plane *plane,
> drm_framebuffer_get(state->fb);
>
> state->dirty = false;
> + state->dirty_clips = NULL;
> + state->num_dirty_clips = 0;
> state->fence = NULL;
> state->commit = NULL;
> }
> @@ -3567,6 +3569,8 @@ void __drm_atomic_helper_plane_destroy_state(struct
> drm_plane_state *state)
>
> if (state->commit)
> drm_crtc_commit_put(state->commit);
> +
> + kfree(state->dirty_clips);
> }
> EXPORT_SYMBOL(__drm_atomic_helper_plane_destroy_state);
>
> @@ -3877,8 +3881,20 @@ int drm_atomic_helper_dirtyfb(struct drm_framebuffer
> *fb,
> struct drm_modeset_acquire_ctx ctx;
> struct drm_atomic_state *state;
> struct drm_plane *plane;
> + bool fb_found = false;
> int ret = 0;
>
> + /* fbdev can flush even when we don't want it to */
> + drm_for_each_plane(plane, fb->dev) {
> + if (plane->state->fb == fb) {
> + fb_found = true;
> + break;
> + }
> + }
> +
> + if (!fb_found)
> + return 0;
> +
> /*
> * When called from ioctl, we are interruptable, but not when
> * called internally (ie. defio worker)
> @@ -3907,6 +3923,25 @@ int drm_atomic_helper_dirtyfb(struct drm_framebuffer
> *fb,
> }
>
> plane_state->dirty = true;
> + if (clips && num_clips)
> + plane_state->dirty_clips = kmemdup(clips, num_clips
> * sizeof(*clips),
> + GFP_KERNEL);
> + else
> + plane_state->dirty_clips = kzalloc(sizeof(*clips),
> GFP_KERNEL);
> +
> + if (!plane_state->dirty_clips) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + if (clips && num_clips) {
> + plane_state->num_dirty_clips = num_clips;
> + } else {
> + /* TODO: Maybe choose better max values */
> + plane_state->dirty_clips->x2 = ~0;
> + plane_state->dirty_clips->y2 = ~0;
> + plane_state->num_dirty_clips = 1;
Either we fill this out for all legacy paths, or we just require that
drivers upload everything when num_clips == 0. The trouble with having
num_clips == 0 imply a full upload is that we can't do a pure pan
without having to set a dummy clip rect of 0 size. Which is also
silly.
So I'm leaning towards going through all the legacy ioctl paths (well,
at least the ones where we agree it should result in a full upload,
cursor probably excluded) and setting up a clip rect with max values
like above for all of them.
And we'd need to remove the ->dirty bit then I think, since it'd be
entirely redundant.
Cheers, Daniel
> + }
> }
>
> ret = drm_atomic_nonblocking_commit(state);
> diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
> b/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
> index e68b528ae64d..1a0c72c496f6 100644
> --- a/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
> +++ b/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
> @@ -121,12 +121,14 @@ void tinydrm_display_pipe_update(struct
> drm_simple_display_pipe *pipe,
> struct drm_plane_state *old_state)
> {
> struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
> - struct drm_framebuffer *fb = pipe->plane.state->fb;
> + struct drm_plane_state *new_state = pipe->plane.state;
> + struct drm_framebuffer *fb = new_state->fb;
> struct drm_crtc *crtc = &tdev->pipe.crtc;
>
> - if (fb && (fb != old_state->fb)) {
> + if (fb && ((fb != old_state->fb) || new_state->dirty_clips)) {
> if (tdev->fb_dirty)
> - tdev->fb_dirty(fb, NULL, 0, 0, NULL, 0);
> + tdev->fb_dirty(fb, NULL, 0, 0,
> new_state->dirty_clips,
> + new_state->num_dirty_clips);
> }
>
> if (crtc->state->event) {
> diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c
> b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> index 4d1fb31a781f..49dee24dde60 100644
> --- a/drivers/gpu/drm/tinydrm/mipi-dbi.c
> +++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> @@ -9,6 +9,7 @@
> * (at your option) any later version.
> */
>
> +#include <drm/drm_atomic_helper.h>
> #include <drm/drm_gem_framebuffer_helper.h>
> #include <drm/tinydrm/mipi-dbi.h>
> #include <drm/tinydrm/tinydrm-helpers.h>
> @@ -254,7 +257,7 @@ static int mipi_dbi_fb_dirty(struct drm_framebuffer *fb,
> static const struct drm_framebuffer_funcs mipi_dbi_fb_funcs = {
> .destroy = drm_gem_fb_destroy,
> .create_handle = drm_gem_fb_create_handle,
> - .dirty = tinydrm_fb_dirty,
> + .dirty = drm_atomic_helper_dirtyfb,
> };
>
> /**
>
>
> I did some brief testing a few months back with PRIME buffers imported
> from vc4 and it looked like X11 sometimes did a page flip followed by a
> dirtyfb. This kills performance for me since I flush on both. Do you know
> any details on how/where X11 handles this?
>
> Noralf.
>
>
>> drivers/gpu/drm/drm_atomic_helper.c | 66
>> +++++++++++++++++++++++++++++++++++++
>> drivers/gpu/drm/msm/msm_atomic.c | 5 ++-
>> drivers/gpu/drm/msm/msm_fb.c | 1 +
>> include/drm/drm_atomic_helper.h | 4 +++
>> include/drm/drm_plane.h | 9 +++++
>> 5 files changed, 84 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic_helper.c
>> b/drivers/gpu/drm/drm_atomic_helper.c
>> index c35654591c12..a578dc681b27 100644
>> --- a/drivers/gpu/drm/drm_atomic_helper.c
>> +++ b/drivers/gpu/drm/drm_atomic_helper.c
>> @@ -3504,6 +3504,7 @@ void
>> __drm_atomic_helper_plane_duplicate_state(struct drm_plane *plane,
>> if (state->fb)
>> drm_framebuffer_get(state->fb);
>> + state->dirty = false;
>> state->fence = NULL;
>> state->commit = NULL;
>> }
>> @@ -3847,6 +3848,71 @@ int drm_atomic_helper_legacy_gamma_set(struct
>> drm_crtc *crtc,
>> }
>> EXPORT_SYMBOL(drm_atomic_helper_legacy_gamma_set);
>> +/**
>> + * drm_atomic_helper_dirtyfb - helper for dirtyfb
>> + *
>> + * A helper to implement drm_framebuffer_funcs::dirty
>> + */
>> +int drm_atomic_helper_dirtyfb(struct drm_framebuffer *fb,
>> + struct drm_file *file_priv, unsigned flags,
>> + unsigned color, struct drm_clip_rect *clips,
>> + unsigned num_clips)
>> +{
>> + struct drm_modeset_acquire_ctx ctx;
>> + struct drm_atomic_state *state;
>> + struct drm_plane *plane;
>> + int ret = 0;
>> +
>> + /*
>> + * When called from ioctl, we are interruptable, but not when
>> + * called internally (ie. defio worker)
>> + */
>> + drm_modeset_acquire_init(&ctx,
>> + file_priv ? DRM_MODESET_ACQUIRE_INTERRUPTIBLE : 0);
>> +
>> + state = drm_atomic_state_alloc(fb->dev);
>> + if (!state) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> + state->acquire_ctx = &ctx;
>> +
>> +retry:
>> + drm_for_each_plane(plane, fb->dev) {
>> + struct drm_plane_state *plane_state;
>> +
>> + if (plane->state->fb != fb)
>> + continue;
>> +
>> + plane_state = drm_atomic_get_plane_state(state, plane);
>> + if (IS_ERR(plane_state)) {
>> + ret = PTR_ERR(plane_state);
>> + goto out;
>> + }
>> +
>> + plane_state->dirty = true;
>> + }
>> +
>> + ret = drm_atomic_nonblocking_commit(state);
>> +
>> +out:
>> + if (ret == -EDEADLK) {
>> + drm_atomic_state_clear(state);
>> + ret = drm_modeset_backoff(&ctx);
>> + if (!ret)
>> + goto retry;
>> + }
>> +
>> + drm_atomic_state_put(state);
>> +
>> + drm_modeset_drop_locks(&ctx);
>> + drm_modeset_acquire_fini(&ctx);
>> +
>> + return ret;
>> +
>> +}
>> +EXPORT_SYMBOL(drm_atomic_helper_dirtyfb);
>> +
>> /**
>> * __drm_atomic_helper_private_duplicate_state - copy atomic private
>> state
>> * @obj: CRTC object
>> diff --git a/drivers/gpu/drm/msm/msm_atomic.c
>> b/drivers/gpu/drm/msm/msm_atomic.c
>> index bf5f8c39f34d..bb55a048e98b 100644
>> --- a/drivers/gpu/drm/msm/msm_atomic.c
>> +++ b/drivers/gpu/drm/msm/msm_atomic.c
>> @@ -201,7 +201,10 @@ int msm_atomic_commit(struct drm_device *dev,
>> * Figure out what fence to wait for:
>> */
>> for_each_oldnew_plane_in_state(state, plane, old_plane_state,
>> new_plane_state, i) {
>> - if ((new_plane_state->fb != old_plane_state->fb) &&
>> new_plane_state->fb) {
>> + bool sync_fb = new_plane_state->fb &&
>> + ((new_plane_state->fb != old_plane_state->fb) ||
>> + new_plane_state->dirty);
>> + if (sync_fb) {
>> struct drm_gem_object *obj =
>> msm_framebuffer_bo(new_plane_state->fb, 0);
>> struct msm_gem_object *msm_obj = to_msm_bo(obj);
>> struct dma_fence *fence =
>> reservation_object_get_excl_rcu(msm_obj->resv);
>> diff --git a/drivers/gpu/drm/msm/msm_fb.c b/drivers/gpu/drm/msm/msm_fb.c
>> index 0e0c87252ab0..a5d882a34a33 100644
>> --- a/drivers/gpu/drm/msm/msm_fb.c
>> +++ b/drivers/gpu/drm/msm/msm_fb.c
>> @@ -62,6 +62,7 @@ static void msm_framebuffer_destroy(struct
>> drm_framebuffer *fb)
>> static const struct drm_framebuffer_funcs msm_framebuffer_funcs = {
>> .create_handle = msm_framebuffer_create_handle,
>> .destroy = msm_framebuffer_destroy,
>> + .dirty = drm_atomic_helper_dirtyfb,
>> };
>> #ifdef CONFIG_DEBUG_FS
>> diff --git a/include/drm/drm_atomic_helper.h
>> b/include/drm/drm_atomic_helper.h
>> index 26aaba58d6ce..9b7a95c2643d 100644
>> --- a/include/drm/drm_atomic_helper.h
>> +++ b/include/drm/drm_atomic_helper.h
>> @@ -183,6 +183,10 @@ int drm_atomic_helper_legacy_gamma_set(struct
>> drm_crtc *crtc,
>> u16 *red, u16 *green, u16 *blue,
>> uint32_t size,
>> struct drm_modeset_acquire_ctx
>> *ctx);
>> +int drm_atomic_helper_dirtyfb(struct drm_framebuffer *fb,
>> + struct drm_file *file_priv, unsigned flags,
>> + unsigned color, struct drm_clip_rect *clips,
>> + unsigned num_clips);
>> void __drm_atomic_helper_private_obj_duplicate_state(struct
>> drm_private_obj *obj,
>> struct
>> drm_private_state *state);
>> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
>> index f7bf4a48b1c3..296fa22bda7a 100644
>> --- a/include/drm/drm_plane.h
>> +++ b/include/drm/drm_plane.h
>> @@ -76,6 +76,15 @@ struct drm_plane_state {
>> */
>> struct drm_framebuffer *fb;
>> + /**
>> + * @dirty:
>> + *
>> + * Flag that indicates the fb contents have changed even though
>> the
>> + * fb has not. This is mostly a stop-gap solution until we have
>> + * atomic dirty-rect(s) property.
>> + */
>> + bool dirty;
>> +
>> /**
>> * @fence:
>> *
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Freedreno
mailing list