[Freedreno] [[RFC]DPU PATCH 0/4] Add suppport for sn65dsi86 bridge chip and Innolux 2k edp panel driver

Sandeep Panda spanda at codeaurora.org
Wed Apr 18 12:19:58 UTC 2018


Changelog:

v3 -> v4:
Current patchset separates out eDP panel specific resources from sn65dsi86
bridge driver and creates a separate driver for the innloux edp panel.

Now bridge driver check if any panel is attached or not to get the supported
modes. If any panel is attached then query from panel driver to get the modes,
or else probe the provided i2c adapter to read the modes from EDID.

Removed hardcoding of bridge init sequence. With this patchset bridge driver now
will program the init sequence based on the current mode set by drm framework.

Current patchset is not tested on actual bridge chip/panel.

Sandeep Panda (4):
  drm/bridge: add support for sn65dsi86 bridge driver
  dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings
  drm/panel: add Innolux TV123WAM eDP panel driver
  dt-bindings: Add Innolux TV123WAM panel bindings

 .../bindings/display/bridge/ti,sn65dsi86.txt       |  60 ++
 .../display/panel/innolux,edp-2k-panel.txt         |  21 +
 drivers/gpu/drm/bridge/ti-sn65dsi86.c              | 742 +++++++++++++++++++++
 drivers/gpu/drm/panel/panel-innolux-tv123wam.c     | 299 +++++++++
 4 files changed, 1122 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,edp-2k-panel.txt
 create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi86.c
 create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



More information about the Freedreno mailing list