[Freedreno] [[RFC]DPU PATCH 3/4] drm/panel: add Innolux TV123WAM eDP panel driver
Sandeep Panda
spanda at codeaurora.org
Wed Apr 18 12:20:01 UTC 2018
Add support for Innolux TV123WAM 12.3" panel which
is an eDP panel.
Signed-off-by: Sandeep Panda <spanda at codeaurora.org>
---
drivers/gpu/drm/panel/panel-innolux-tv123wam.c | 299 +++++++++++++++++++++++++
1 file changed, 299 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-innolux-tv123wam.c
diff --git a/drivers/gpu/drm/panel/panel-innolux-tv123wam.c b/drivers/gpu/drm/panel/panel-innolux-tv123wam.c
new file mode 100644
index 0000000..f149fa9
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-innolux-tv123wam.c
@@ -0,0 +1,299 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+#include <video/display_timing.h>
+#include <video/videomode.h>
+
+struct panel_edp_2k_desc {
+ const struct drm_display_mode *modes;
+ unsigned int num_modes;
+ struct {
+ unsigned int width;
+ unsigned int height;
+ } size;
+ u32 bpc;
+ u32 bus_flags;
+};
+
+struct panel_edp_2k_data {
+ struct drm_panel base;
+ bool enabled;
+ bool prepared;
+
+ const struct panel_edp_2k_desc *desc;
+
+ struct regulator *supply;
+ struct gpio_desc *enable_gpio;
+ struct backlight_device *backlight;
+};
+
+static const struct drm_display_mode innolux_edp_2k_mode = {
+ .clock = 206016,
+ .hdisplay = 2160,
+ .hsync_start = 2160 + 80,
+ .hsync_end = 2160 + 80 + 48,
+ .htotal = 2160 + 80 + 48 + 32,
+ .vdisplay = 1440,
+ .vsync_start = 1440 + 27,
+ .vsync_end = 1440 + 27 + 3,
+ .vtotal = 1440 + 27 + 3 + 10,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
+static const struct panel_edp_2k_desc innolux_edp_2k = {
+ .modes = &innolux_edp_2k_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 223,
+ .height = 125,
+ },
+ .bpc = 8,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+};
+
+static const struct of_device_id platform_of_match[] = {
+ {
+ .compatible = "innolux, edp_2k_panel",
+ .data = &innolux_edp_2k,
+ },
+};
+
+static inline struct panel_edp_2k_data *
+to_panel_edp_2k_data(struct drm_panel *panel)
+{
+ return container_of(panel, struct panel_edp_2k_data, base);
+}
+
+static int panel_edp_2k_disable(struct drm_panel *panel)
+{
+ struct panel_edp_2k_data *pdata = to_panel_edp_2k_data(panel);
+
+ if (!pdata->enabled)
+ return 0;
+
+ if (pdata->backlight) {
+ pdata->backlight->props.power = FB_BLANK_POWERDOWN;
+ pdata->backlight->props.state |= BL_CORE_FBBLANK;
+ backlight_update_status(pdata->backlight);
+ }
+
+ pdata->enabled = false;
+
+ return 0;
+}
+
+static int panel_edp_2k_unprepare(struct drm_panel *panel)
+{
+ struct panel_edp_2k_data *pdata = to_panel_edp_2k_data(panel);
+
+ if (!pdata->prepared)
+ return 0;
+
+ if (pdata->enable_gpio)
+ gpiod_set_value_cansleep(pdata->enable_gpio, 0);
+
+ regulator_disable(pdata->supply);
+
+ pdata->prepared = false;
+
+ return 0;
+}
+
+static int panel_edp_2k_prepare(struct drm_panel *panel)
+{
+ struct panel_edp_2k_data *pdata = to_panel_edp_2k_data(panel);
+ int ret;
+
+ if (pdata->prepared)
+ return 0;
+
+ ret = regulator_enable(pdata->supply);
+ if (ret < 0) {
+ dev_err(panel->dev, "failed to enable supply: %d\n", ret);
+ return ret;
+ }
+
+ if (pdata->enable_gpio)
+ gpiod_set_value_cansleep(pdata->enable_gpio, 1);
+
+ pdata->prepared = true;
+
+ return 0;
+}
+
+static int panel_edp_2k_enable(struct drm_panel *panel)
+{
+ struct panel_edp_2k_data *pdata = to_panel_edp_2k_data(panel);
+
+ if (pdata->enabled)
+ return 0;
+
+ if (pdata->backlight) {
+ pdata->backlight->props.state &= ~BL_CORE_FBBLANK;
+ pdata->backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(pdata->backlight);
+ }
+
+ pdata->enabled = true;
+
+ return 0;
+}
+
+static int panel_edp_2k_get_modes(struct drm_panel *panel)
+{
+ struct panel_edp_2k_data *pdata = to_panel_edp_2k_data(panel);
+ struct drm_connector *connector = pdata->base.connector;
+ struct drm_device *drm = pdata->base.drm;
+ struct drm_display_mode *mode;
+ unsigned int i, num = 0;
+
+ if (!pdata->desc || !connector || !drm)
+ return 0;
+
+ for (i = 0; i < pdata->desc->num_modes; i++) {
+ const struct drm_display_mode *m = &pdata->desc->modes[i];
+
+ mode = drm_mode_duplicate(drm, m);
+ if (!mode) {
+ dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, m->vrefresh);
+ continue;
+ }
+
+ mode->type |= DRM_MODE_TYPE_DRIVER;
+
+ if (pdata->desc->num_modes == 1)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(connector, mode);
+ num++;
+ }
+
+ connector->display_info.bpc = pdata->desc->bpc;
+ connector->display_info.width_mm = pdata->desc->size.width;
+ connector->display_info.height_mm = pdata->desc->size.height;
+ connector->display_info.bus_flags = pdata->desc->bus_flags;
+
+ return num;
+}
+
+static const struct drm_panel_funcs panel_edp_2k_funcs = {
+ .disable = panel_edp_2k_disable,
+ .unprepare = panel_edp_2k_unprepare,
+ .prepare = panel_edp_2k_prepare,
+ .enable = panel_edp_2k_enable,
+ .get_modes = panel_edp_2k_get_modes,
+};
+
+static int panel_edp_2k_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *id;
+ struct device_node *backlight;
+ struct panel_edp_2k_data *pdata;
+ int ret;
+
+ id = of_match_node(platform_of_match, pdev->dev.of_node);
+ if (!id)
+ return -ENODEV;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->enabled = false;
+ pdata->desc = id->data;
+
+ pdata->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(pdata->supply))
+ return PTR_ERR(pdata->supply);
+
+ pdata->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(pdata->enable_gpio)) {
+ ret = PTR_ERR(pdata->enable_gpio);
+ dev_err(dev, "failed to request GPIO: %d\n", ret);
+ return ret;
+ }
+
+ backlight = of_parse_phandle(dev->of_node, "backlight", 0);
+ if (backlight) {
+ pdata->backlight = of_find_backlight_by_node(backlight);
+ of_node_put(backlight);
+
+ if (!pdata->backlight)
+ return -EPROBE_DEFER;
+ }
+
+ drm_panel_init(&pdata->base);
+ pdata->base.dev = dev;
+ pdata->base.funcs = &panel_edp_2k_funcs;
+
+ ret = drm_panel_add(&pdata->base);
+ if (ret < 0)
+ goto free_backlight;
+
+ dev_set_drvdata(dev, pdata);
+
+ return 0;
+
+free_backlight:
+ if (pdata->backlight)
+ put_device(&pdata->backlight->dev);
+
+ return ret;
+}
+
+static int panel_edp_2k_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct panel_edp_2k_data *pdata = dev_get_drvdata(dev);
+
+ drm_panel_detach(&pdata->base);
+ drm_panel_remove(&pdata->base);
+
+ panel_edp_2k_disable(&pdata->base);
+ panel_edp_2k_unprepare(&pdata->base);
+
+ if (pdata->backlight)
+ put_device(&pdata->backlight->dev);
+
+ return 0;
+}
+
+static struct platform_driver panel_edp_2k_driver = {
+ .driver = {
+ .name = "innolux-2k-edp-panel",
+ .of_match_table = platform_of_match,
+ },
+ .probe = panel_edp_2k_probe,
+ .remove = panel_edp_2k_remove,
+};
+
+static int __init panel_edp_2k_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&panel_edp_2k_driver);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+module_init(panel_edp_2k_init);
+
+static void __exit panel_edp_2k_exit(void)
+{
+ platform_driver_unregister(&panel_edp_2k_driver);
+}
+module_exit(panel_edp_2k_exit);
+
+MODULE_DESCRIPTION("Innolux 2k eDP panel driver");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the Freedreno
mailing list