[Freedreno] [PATCH v2] drm/msm: dpu: Allow planes to extend past active display

[Sean Paul]

On Tue, Aug 28, 2018, 6:04 PM Jeykumar Sankaran <jsanka at codeaurora.org>
wrote:

> On 2018-08-28 13:50, Sean Paul wrote:
> > From: Sean Paul <seanpaul at chromium.org>
> >
> > The atomic_check is a bit too aggressive with respect to planes which
> > leave the active area. This caused a bunch of log spew when the cursor
> > got to the edge of the screen and stopped it from going all the way.
> >
> > This patch removes the conservative bounds checks from atomic and clips
> > the dst rect such that we properly display planes which go off the
> > screen.
> >
> > Changes in v2:
> > - Apply the clip to src as well (taking into account scaling)
> >
> > Cc: Sravanthi Kollukuduru <skolluku at codeaurora.org>
> > Cc: Jeykumar Sankaran <jsanka at codeaurora.org>
> > Signed-off-by: Sean Paul <seanpaul at chromium.org>
> > ---
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  |  3 +--
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 14 +++++++++++++-
> >  2 files changed, 14 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > index 07c2d15b45f2..f0a5e776ba32 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > @@ -1551,8 +1551,7 @@ static int dpu_crtc_atomic_check(struct drm_crtc
> > *crtc,
> >               cnt++;
> >
> >               dst = drm_plane_state_dest(pstate);
> > -             if (!drm_rect_intersect(&clip, &dst) ||
> > -                 !drm_rect_equals(&clip, &dst)) {
> > +             if (!drm_rect_intersect(&clip, &dst)) {
> >                       DPU_ERROR("invalid vertical/horizontal
> > destination\n");
> >                       DPU_ERROR("display: " DRM_RECT_FMT " plane: "
> >                                 DRM_RECT_FMT "\n",
> > DRM_RECT_ARG(&crtc_rect),
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > index efdf9b200dd9..adfd16625188 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> > @@ -1254,7 +1254,8 @@ static int dpu_plane_sspp_atomic_update(struct
> > drm_plane *plane,
> >       const struct dpu_format *fmt;
> >       struct drm_crtc *crtc;
> >       struct drm_framebuffer *fb;
> > -     struct drm_rect src, dst;
> > +     struct drm_rect clip = { 0 }, src, dst;
> > +     int hscale, vscale;
> >
> >       if (!plane) {
> >               DPU_ERROR("invalid plane\n");
> > @@ -1300,6 +1301,17 @@ static int dpu_plane_sspp_atomic_update(struct
> > drm_plane *plane,
> >
> >       dst = drm_plane_state_dest(state);
> >
> > +     hscale = drm_rect_calc_hscale(&src, &dst,
> > +                                   pdpu->pipe_sblk->maxupscale,
> > +                                   pdpu->pipe_sblk->maxdwnscale);
> > +     vscale = drm_rect_calc_vscale(&src, &dst,
> > +                                   pdpu->pipe_sblk->maxupscale,
> > +                                   pdpu->pipe_sblk->maxdwnscale);
> > +
> > +     clip.x2 = crtc->state->adjusted_mode.hdisplay;
> > +     clip.y2 = crtc->state->adjusted_mode.vdisplay;
> > +     drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale);
> > +
> >       DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FMT "->crtc%u "
> > DRM_RECT_FMT
> >                       ", %4.4s ubwc %d\n", fb->base.id,
> > DRM_RECT_ARG(&src),
> >                       crtc->base.id, DRM_RECT_ARG(&dst),
>
> Don't you have to update pdpu->pipe_cfg.src_rect and
> pdpu->pipe_cfg.dst_rect with clip?
>

No, clip is the active area, so it'll always be equal to the adjusted mode.

Sean


> --
> Jeykumar S
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/freedreno/attachments/20180828/94de13ee/attachment.html>