[Freedreno] [PATCH 21/21] arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file

Sean Paul seanpaul at chromium.org
Mon Jul 9 17:31:57 UTC 2018


Signed-off-by: Sean Paul <seanpaul at chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 194 +++++++++++++++++++++++++++
 1 file changed, 194 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb3c995..339afed856de 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,6 +5,8 @@
  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -221,6 +223,198 @@
 			#interrupt-cells = <2>;
 		};
 
+		mdss: mdss at ae00000 {
+			compatible = "qcom,dpu-mdss";
+			reg = <0xae00000 0x1000>;
+			reg-names = "mdss_phys";
+
+			power-domains = <&dispcc 0>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "core";
+			clock-frequency = <0 0 300000000>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			/* iommus = <&apps_iommu 0>; */
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdss_mdp: mdp at ae01000 {
+				compatible = "qcom,dpu";
+				reg = <0x0ae01000 0x8f000>,
+				      <0x0aeb0000 0x2008>;
+				reg-names = "mdp_phys", "vbif_phys";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+				clock-frequency = <0 0 300000000 19200000>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port at 1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&dsi1_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi at ae94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0xae94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte_clk",
+					      "byte_intf_clk",
+					      "pixel_clk",
+					      "core_clk",
+					      "iface_clk",
+					      "bus_clk";
+
+				phys = <&dsi0_phy>;
+				phy-names = "dsi-phy";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port at 1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi0_phy: dsi-phy at ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0xae94400 0x200>,
+				      <0xae94a00 0x1e0>,
+				      <0xae94600 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_pll",
+					    "dsi_phy_lane";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "iface_clk";
+			};
+
+			dsi1: dsi at ae96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0xae96000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5 0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte_clk",
+					      "byte_intf_clk",
+					      "pixel_clk",
+					      "core_clk",
+					      "iface_clk",
+					      "bus_clk";
+
+				phys = <&dsi1_phy>;
+				phy-names = "dsi-phy";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+						dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port at 1 {
+						reg = <1>;
+						dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi1_phy: dsi-phy at ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0xae96400 0x200>,
+				      <0xae96a00 0x10e>,
+				      <0xae96600 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_pll",
+					    "dsi_phy_lane";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "iface_clk";
+			};
+		};
+
+		dispcc: qcom,dispcc at af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0xaf00000 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		spmi_bus: spmi at c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0xc440000 0x1100>,
-- 
Sean Paul, Software Engineer, Google / Chromium OS



More information about the Freedreno mailing list