[Freedreno] [DPU PATCH v4 5/6] drm/msm: hook up DPU with upstream DSI

Jeykumar Sankaran jsanka at codeaurora.org
Fri Jun 1 17:45:52 UTC 2018


Switch DPU from dsi-staging to upstream dsi driver. To make
the switch atomic, this change includes:
- remove dpu connector layers
- clean up dpu connector dependencies in encoder/crtc
- compile out writeback and display port drivers
- compile out dsi-staging driver (separate patch submitted to
  remove the driver)
- adapt upstream device hierarchy

changes in v2:
	- remove files not applicable upstream (Sean Paul)
	- remove compiled out non-dsi display init (Sean Paul)
	- split unrelated changes into separate patch set (Sean Paul)
changes in v3:
	- fix compilation warning
        - compile out dsi staging
changes in v4:
	- remove top_ctrl check in rm release

Signed-off-by: Jeykumar Sankaran <jsanka at codeaurora.org>
Signed-off-by: Sean Paul <seanpaul at chromium.org>
Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
---
 drivers/gpu/drm/msm/Makefile                       |   22 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_connector.c      | 1185 --------------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_connector.h      |  555 ---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c           |    9 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        |  179 +--
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h        |   10 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h   |    8 +-
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c   |    6 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |  488 +-------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h            |    6 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c             |   65 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h             |   11 +
 drivers/gpu/drm/msm/dpu_dbg.c                      |    3 -
 drivers/gpu/drm/msm/msm_drv.c                      |   47 +-
 drivers/gpu/drm/msm/msm_drv.h                      |   39 -
 15 files changed, 159 insertions(+), 2474 deletions(-)
 delete mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_connector.c
 delete mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_connector.h

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index d947f2a..d7558ed 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 ccflags-y := -Idrivers/gpu/drm/msm
 ccflags-y += -Idrivers/gpu/drm/msm/disp/dpu1
-ccflags-y += -Idrivers/gpu/drm/msm/dsi-staging
 ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
 
 msm-y := \
@@ -48,7 +47,6 @@ msm-y := \
 	disp/mdp5/mdp5_plane.o \
 	disp/mdp5/mdp5_smp.o \
 	disp/dpu1/dpu_color_processing.o \
-	disp/dpu1/dpu_connector.o \
 	disp/dpu1/dpu_core_irq.o \
 	disp/dpu1/dpu_core_perf.o \
 	disp/dpu1/dpu_crtc.o \
@@ -141,26 +139,6 @@ msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
 			dsi/phy/dsi_phy.o \
 			disp/mdp5/mdp5_cmd_encoder.o
 
-msm-$(CONFIG_DRM_MSM_DSI_STAGING) += dsi-staging/dsi_phy.o \
-				dsi-staging/dsi_pwr.o \
-				dsi-staging/dsi_phy.o \
-				dsi-staging/dsi_phy_hw_v2_0.o \
-				dsi-staging/dsi_phy_hw_v3_0.o \
-				dsi-staging/dsi_phy_timing_calc.o \
-				dsi-staging/dsi_phy_timing_v2_0.o \
-				dsi-staging/dsi_phy_timing_v3_0.o \
-				dsi-staging/dsi_ctrl_hw_cmn.o \
-				dsi-staging/dsi_ctrl_hw_1_4.o \
-				dsi-staging/dsi_ctrl_hw_2_0.o \
-				dsi-staging/dsi_ctrl_hw_2_2.o \
-				dsi-staging/dsi_ctrl.o \
-				dsi-staging/dsi_catalog.o \
-				dsi-staging/dsi_drm.o \
-				dsi-staging/dsi_display.o \
-				dsi-staging/dsi_panel.o \
-				dsi-staging/dsi_clk_manager.o \
-				dsi-staging/dsi_display_test.o
-
 msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
 msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
 msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_connector.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_connector.c
deleted file mode 100644
index 969919f..0000000
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_connector.c
+++ /dev/null
@@ -1,1185 +0,0 @@
-/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt)	"[drm:%s:%d] " fmt, __func__, __LINE__
-#include "msm_drv.h"
-#include "dpu_dbg.h"
-
-#include "dpu_kms.h"
-#include "dpu_connector.h"
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-#include <linux/backlight.h>
-#include "dsi_drm.h"
-#include "dsi_display.h"
-#endif
-
-#define BL_NODE_NAME_SIZE 32
-
-#define DPU_DEBUG_CONN(c, fmt, ...) DPU_DEBUG("conn%d " fmt,\
-		(c) ? (c)->base.base.id : -1, ##__VA_ARGS__)
-
-#define DPU_ERROR_CONN(c, fmt, ...) DPU_ERROR("conn%d " fmt,\
-		(c) ? (c)->base.base.id : -1, ##__VA_ARGS__)
-
-static const struct drm_prop_enum_list e_topology_name[] = {
-	{DPU_RM_TOPOLOGY_NONE,	"dpu_none"},
-	{DPU_RM_TOPOLOGY_SINGLEPIPE,	"dpu_singlepipe"},
-	{DPU_RM_TOPOLOGY_DUALPIPE,	"dpu_dualpipe"},
-	{DPU_RM_TOPOLOGY_DUALPIPE_3DMERGE,	"dpu_dualpipemerge"},
-};
-
-static const struct drm_prop_enum_list e_topology_control[] = {
-	{DPU_RM_TOPCTL_RESERVE_LOCK,	"reserve_lock"},
-	{DPU_RM_TOPCTL_RESERVE_CLEAR,	"reserve_clear"},
-	{DPU_RM_TOPCTL_DSPP,		"dspp"},
-};
-static const struct drm_prop_enum_list e_power_mode[] = {
-	{DPU_MODE_DPMS_ON,	"ON"},
-	{DPU_MODE_DPMS_LP1,	"LP1"},
-	{DPU_MODE_DPMS_LP2,	"LP2"},
-	{DPU_MODE_DPMS_OFF,	"OFF"},
-};
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-static int dpu_backlight_device_update_status(struct backlight_device *bd)
-{
-	int brightness;
-	struct dsi_display *display;
-	struct dpu_connector *c_conn;
-	int bl_lvl;
-	struct drm_event event;
-
-	brightness = bd->props.brightness;
-
-	if ((bd->props.power != FB_BLANK_UNBLANK) ||
-			(bd->props.state & BL_CORE_FBBLANK) ||
-			(bd->props.state & BL_CORE_SUSPENDED))
-		brightness = 0;
-
-	c_conn = bl_get_data(bd);
-	display = (struct dsi_display *) c_conn->display;
-	if (brightness > display->panel->bl_config.bl_max_level)
-		brightness = display->panel->bl_config.bl_max_level;
-
-	/* map UI brightness into driver backlight level with rounding */
-	bl_lvl = mult_frac(brightness, display->panel->bl_config.bl_max_level,
-			display->panel->bl_config.brightness_max_level);
-
-	if (!bl_lvl && brightness)
-		bl_lvl = 1;
-
-	if (c_conn->ops.set_backlight) {
-		event.type = DRM_EVENT_SYS_BACKLIGHT;
-		event.length = sizeof(u32);
-		msm_mode_object_event_notify(&c_conn->base.base,
-				c_conn->base.dev, &event, (u8 *)&brightness);
-		c_conn->ops.set_backlight(c_conn->display, bl_lvl);
-	}
-
-	return 0;
-}
-
-static int dpu_backlight_device_get_brightness(struct backlight_device *bd)
-{
-	return 0;
-}
-
-static const struct backlight_ops dpu_backlight_device_ops = {
-	.update_status = dpu_backlight_device_update_status,
-	.get_brightness = dpu_backlight_device_get_brightness,
-};
-
-static int dpu_backlight_setup(struct dpu_connector *c_conn,
-					struct drm_device *dev)
-{
-	struct backlight_properties props;
-	struct dsi_display *display;
-	struct dsi_backlight_config *bl_config;
-	static int display_count;
-	char bl_node_name[BL_NODE_NAME_SIZE];
-
-	if (!c_conn || !dev || !dev->dev) {
-		DPU_ERROR("invalid param\n");
-		return -EINVAL;
-	} else if (c_conn->connector_type != DRM_MODE_CONNECTOR_DSI) {
-		return 0;
-	}
-
-	memset(&props, 0, sizeof(props));
-	props.type = BACKLIGHT_RAW;
-	props.power = FB_BLANK_UNBLANK;
-
-	display = (struct dsi_display *) c_conn->display;
-	bl_config = &display->panel->bl_config;
-	props.max_brightness = bl_config->brightness_max_level;
-	props.brightness = bl_config->brightness_max_level;
-	snprintf(bl_node_name, BL_NODE_NAME_SIZE, "panel%u-backlight",
-							display_count);
-	c_conn->bl_device = backlight_device_register(bl_node_name, dev->dev,
-			c_conn, &dpu_backlight_device_ops, &props);
-	if (IS_ERR_OR_NULL(c_conn->bl_device)) {
-		DPU_ERROR("Failed to register backlight: %ld\n",
-				    PTR_ERR(c_conn->bl_device));
-		c_conn->bl_device = NULL;
-		return -ENODEV;
-	}
-	display_count++;
-
-	return 0;
-}
-#endif
-
-int dpu_connector_trigger_event(void *drm_connector,
-		uint32_t event_idx, uint32_t instance_idx,
-		uint32_t data0, uint32_t data1,
-		uint32_t data2, uint32_t data3)
-{
-	struct dpu_connector *c_conn;
-	unsigned long irq_flags;
-	void (*cb_func)(uint32_t event_idx,
-			uint32_t instance_idx, void *usr,
-			uint32_t data0, uint32_t data1,
-			uint32_t data2, uint32_t data3);
-	void *usr;
-	int rc = 0;
-
-	/*
-	 * This function may potentially be called from an ISR context, so
-	 * avoid excessive logging/etc.
-	 */
-	if (!drm_connector)
-		return -EINVAL;
-	else if (event_idx >= DPU_CONN_EVENT_COUNT)
-		return -EINVAL;
-	c_conn = to_dpu_connector(drm_connector);
-
-	spin_lock_irqsave(&c_conn->event_lock, irq_flags);
-	cb_func = c_conn->event_table[event_idx].cb_func;
-	usr = c_conn->event_table[event_idx].usr;
-	spin_unlock_irqrestore(&c_conn->event_lock, irq_flags);
-
-	if (cb_func)
-		cb_func(event_idx, instance_idx, usr,
-			data0, data1, data2, data3);
-	else
-		rc = -EAGAIN;
-
-	return rc;
-}
-
-int dpu_connector_register_event(struct drm_connector *connector,
-		uint32_t event_idx,
-		void (*cb_func)(uint32_t event_idx,
-			uint32_t instance_idx, void *usr,
-			uint32_t data0, uint32_t data1,
-			uint32_t data2, uint32_t data3),
-		void *usr)
-{
-	struct dpu_connector *c_conn;
-	unsigned long irq_flags;
-
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return -EINVAL;
-	} else if (event_idx >= DPU_CONN_EVENT_COUNT) {
-		DPU_ERROR("conn%d, invalid event %d\n",
-				connector->base.id, event_idx);
-		return -EINVAL;
-	}
-	c_conn = to_dpu_connector(connector);
-
-	spin_lock_irqsave(&c_conn->event_lock, irq_flags);
-	c_conn->event_table[event_idx].cb_func = cb_func;
-	c_conn->event_table[event_idx].usr = usr;
-	spin_unlock_irqrestore(&c_conn->event_lock, irq_flags);
-
-	/* optionally notify display of event registration */
-	if (c_conn->ops.enable_event && c_conn->display)
-		c_conn->ops.enable_event(connector, event_idx,
-				cb_func != NULL, c_conn->display);
-	return 0;
-}
-
-void dpu_connector_unregister_event(struct drm_connector *connector,
-		uint32_t event_idx)
-{
-	(void)dpu_connector_register_event(connector, event_idx, 0, 0);
-}
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-static u32 dither_matrix[DITHER_MATRIX_SZ] = {
-	15, 7, 13, 5, 3, 11, 1, 9, 12, 4, 14, 6, 0, 8, 2, 10
-};
-
-static int _dpu_connector_get_default_dither_cfg_v1(
-		struct dpu_connector *c_conn, void *cfg)
-{
-	struct drm_msm_dither *dither_cfg = (struct drm_msm_dither *)cfg;
-	enum dsi_pixel_format dst_format = DSI_PIXEL_FORMAT_MAX;
-
-	if (!c_conn || !cfg) {
-		DPU_ERROR("invalid argument(s), c_conn %pK, cfg %pK\n",
-				c_conn, cfg);
-		return -EINVAL;
-	}
-
-	if (!c_conn->ops.get_dst_format) {
-		DPU_DEBUG("get_dst_format is unavailable\n");
-		return 0;
-	}
-
-	dst_format = c_conn->ops.get_dst_format(c_conn->display);
-	switch (dst_format) {
-	case DSI_PIXEL_FORMAT_RGB888:
-		dither_cfg->c0_bitdepth = 8;
-		dither_cfg->c1_bitdepth = 8;
-		dither_cfg->c2_bitdepth = 8;
-		dither_cfg->c3_bitdepth = 8;
-		break;
-	case DSI_PIXEL_FORMAT_RGB666:
-	case DSI_PIXEL_FORMAT_RGB666_LOOSE:
-		dither_cfg->c0_bitdepth = 6;
-		dither_cfg->c1_bitdepth = 6;
-		dither_cfg->c2_bitdepth = 6;
-		dither_cfg->c3_bitdepth = 6;
-		break;
-	default:
-		DPU_DEBUG("no default dither config for dst_format %d\n",
-			dst_format);
-		return -ENODATA;
-	}
-
-	memcpy(&dither_cfg->matrix, dither_matrix,
-			sizeof(u32) * DITHER_MATRIX_SZ);
-	dither_cfg->temporal_en = 0;
-	return 0;
-}
-
-static void _dpu_connector_install_dither_property(struct drm_device *dev,
-		struct dpu_kms *dpu_kms, struct dpu_connector *c_conn)
-{
-	char prop_name[DRM_PROP_NAME_LEN];
-	struct dpu_mdss_cfg *catalog = NULL;
-	struct drm_property_blob *blob_ptr;
-	void *cfg;
-	int ret = 0;
-	u32 version = 0, len = 0;
-	bool defalut_dither_needed = false;
-
-	if (!dev || !dpu_kms || !c_conn) {
-		DPU_ERROR("invld args (s), dev %pK, dpu_kms %pK, c_conn %pK\n",
-				dev, dpu_kms, c_conn);
-		return;
-	}
-
-	catalog = dpu_kms->catalog;
-	version = DPU_COLOR_PROCESS_MAJOR(
-			catalog->pingpong[0].sblk->dither.version);
-	snprintf(prop_name, ARRAY_SIZE(prop_name), "%s%d",
-			"DPU_PP_DITHER_V", version);
-	switch (version) {
-	case 1:
-		msm_property_install_blob(&c_conn->property_info, prop_name,
-			DRM_MODE_PROP_BLOB,
-			CONNECTOR_PROP_PP_DITHER);
-		len = sizeof(struct drm_msm_dither);
-		cfg = kzalloc(len, GFP_KERNEL);
-		if (!cfg)
-			return;
-
-		ret = _dpu_connector_get_default_dither_cfg_v1(c_conn, cfg);
-		if (!ret)
-			defalut_dither_needed = true;
-		break;
-	default:
-		DPU_ERROR("unsupported dither version %d\n", version);
-		return;
-	}
-
-	if (defalut_dither_needed) {
-		blob_ptr = drm_property_create_blob(dev, len, cfg);
-		if (IS_ERR_OR_NULL(blob_ptr))
-			goto exit;
-		c_conn->blob_dither = blob_ptr;
-	}
-exit:
-	kfree(cfg);
-}
-#endif
-
-int dpu_connector_get_dither_cfg(struct drm_connector *conn,
-			struct drm_connector_state *state, void **cfg,
-			size_t *len)
-{
-	struct dpu_connector *c_conn = NULL;
-	struct dpu_connector_state *c_state = NULL;
-	size_t dither_sz = 0;
-
-	if (!conn || !state || !(*cfg))
-		return -EINVAL;
-
-	c_conn = to_dpu_connector(conn);
-	c_state = to_dpu_connector_state(state);
-
-	/* try to get user config data first */
-	*cfg = msm_property_get_blob(&c_conn->property_info,
-					&c_state->property_state,
-					&dither_sz,
-					CONNECTOR_PROP_PP_DITHER);
-	/* if user config data doesn't exist, use default dither blob */
-	if (*cfg == NULL && c_conn->blob_dither) {
-		*cfg = &c_conn->blob_dither->data;
-		dither_sz = c_conn->blob_dither->length;
-	}
-	*len = dither_sz;
-	return 0;
-}
-
-int dpu_connector_get_info(struct drm_connector *connector,
-		struct msm_display_info *info)
-{
-	struct dpu_connector *c_conn;
-
-	if (!connector || !info) {
-		DPU_ERROR("invalid argument(s), conn %pK, info %pK\n",
-				connector, info);
-		return -EINVAL;
-	}
-
-	c_conn = to_dpu_connector(connector);
-
-	if (!c_conn->display || !c_conn->ops.get_info) {
-		DPU_ERROR("display info not supported for %pK\n",
-				c_conn->display);
-		return -EINVAL;
-	}
-
-	return c_conn->ops.get_info(info, c_conn->display);
-}
-
-static int _dpu_connector_update_power_locked(struct dpu_connector *c_conn)
-{
-	struct drm_connector *connector;
-	void *display;
-	int (*set_power)(struct drm_connector *, int, void *);
-	int mode, rc = 0;
-
-	if (!c_conn)
-		return -EINVAL;
-	connector = &c_conn->base;
-
-	switch (c_conn->dpms_mode) {
-	case DRM_MODE_DPMS_ON:
-		mode = c_conn->lp_mode;
-		break;
-	case DRM_MODE_DPMS_STANDBY:
-		mode = DPU_MODE_DPMS_STANDBY;
-		break;
-	case DRM_MODE_DPMS_SUSPEND:
-		mode = DPU_MODE_DPMS_SUSPEND;
-		break;
-	case DRM_MODE_DPMS_OFF:
-		mode = DPU_MODE_DPMS_OFF;
-		break;
-	default:
-		mode = c_conn->lp_mode;
-		DPU_ERROR("conn %d dpms set to unrecognized mode %d\n",
-				connector->base.id, mode);
-		break;
-	}
-
-	DPU_EVT32(connector->base.id, c_conn->dpms_mode, c_conn->lp_mode, mode);
-	DPU_DEBUG("conn %d - dpms %d, lp %d, panel %d\n", connector->base.id,
-			c_conn->dpms_mode, c_conn->lp_mode, mode);
-
-	if (mode != c_conn->last_panel_power_mode && c_conn->ops.set_power) {
-		display = c_conn->display;
-		set_power = c_conn->ops.set_power;
-
-		mutex_unlock(&c_conn->lock);
-		rc = set_power(connector, mode, display);
-		mutex_lock(&c_conn->lock);
-	}
-	c_conn->last_panel_power_mode = mode;
-
-	return rc;
-}
-
-int dpu_connector_pre_kickoff(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn;
-	struct dpu_connector_state *c_state;
-	int idx, rc = 0;
-
-	if (!connector) {
-		DPU_ERROR("invalid argument\n");
-		return -EINVAL;
-	}
-
-	c_conn = to_dpu_connector(connector);
-	c_state = to_dpu_connector_state(connector->state);
-
-	if (!c_conn->display) {
-		DPU_ERROR("invalid argument\n");
-		return -EINVAL;
-	}
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-	if (c_conn->ops.set_backlight) {
-		DPU_DEBUG("conn%d: Set backlight to 255\n", connector->base.id);
-		c_conn->ops.set_backlight(c_conn->display, 255);
-	}
-#endif
-
-	while ((idx = msm_property_pop_dirty(&c_conn->property_info,
-					&c_state->property_state)) >= 0) {
-		switch (idx) {
-		case CONNECTOR_PROP_LP:
-			mutex_lock(&c_conn->lock);
-			c_conn->lp_mode = dpu_connector_get_property(
-					connector->state, CONNECTOR_PROP_LP);
-			_dpu_connector_update_power_locked(c_conn);
-			mutex_unlock(&c_conn->lock);
-			break;
-		default:
-			/* nothing to do for most properties */
-			break;
-		}
-	}
-
-	DPU_EVT32_VERBOSE(connector->base.id);
-
-	return rc;
-}
-
-void dpu_connector_clk_ctrl(struct drm_connector *connector, bool enable)
-{
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-	struct dpu_connector *c_conn;
-	struct dsi_display *display;
-	u32 state = enable ? DSI_CLK_ON : DSI_CLK_OFF;
-
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return;
-	}
-
-	c_conn = to_dpu_connector(connector);
-	display = (struct dsi_display *) c_conn->display;
-
-	if (display && c_conn->ops.clk_ctrl)
-		c_conn->ops.clk_ctrl(display->mdp_clk_handle,
-				DSI_ALL_CLKS, state);
-#endif
-}
-
-static void dpu_connector_destroy(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn;
-
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return;
-	}
-
-	c_conn = to_dpu_connector(connector);
-
-	if (c_conn->ops.put_modes)
-		c_conn->ops.put_modes(connector, c_conn->display);
-
-	if (c_conn->blob_caps)
-		drm_property_blob_put(c_conn->blob_caps);
-	if (c_conn->blob_hdr)
-		drm_property_blob_put(c_conn->blob_hdr);
-	if (c_conn->blob_dither)
-		drm_property_blob_put(c_conn->blob_dither);
-	msm_property_destroy(&c_conn->property_info);
-
-	if (c_conn->bl_device)
-		backlight_device_unregister(c_conn->bl_device);
-	drm_connector_unregister(connector);
-	mutex_destroy(&c_conn->lock);
-	drm_connector_cleanup(connector);
-	kfree(c_conn);
-}
-
-/**
- * _dpu_connector_destroy_fb - clean up connector state's out_fb buffer
- * @c_conn: Pointer to dpu connector structure
- * @c_state: Pointer to dpu connector state structure
- */
-static void _dpu_connector_destroy_fb(struct dpu_connector *c_conn,
-		struct dpu_connector_state *c_state)
-{
-	if (!c_state || !c_state->out_fb) {
-		DPU_ERROR("invalid state %pK\n", c_state);
-		return;
-	}
-
-	drm_framebuffer_put(c_state->out_fb);
-	c_state->out_fb = NULL;
-
-	if (c_conn)
-		c_state->property_values[CONNECTOR_PROP_OUT_FB].value =
-			msm_property_get_default(&c_conn->property_info,
-					CONNECTOR_PROP_OUT_FB);
-	else
-		c_state->property_values[CONNECTOR_PROP_OUT_FB].value = ~0;
-}
-
-static void dpu_connector_atomic_destroy_state(struct drm_connector *connector,
-		struct drm_connector_state *state)
-{
-	struct dpu_connector *c_conn = NULL;
-	struct dpu_connector_state *c_state = NULL;
-
-	if (!state) {
-		DPU_ERROR("invalid state\n");
-		return;
-	}
-
-	/*
-	 * The base DRM framework currently always passes in a NULL
-	 * connector pointer. This is not correct, but attempt to
-	 * handle that case as much as possible.
-	 */
-	if (connector)
-		c_conn = to_dpu_connector(connector);
-	c_state = to_dpu_connector_state(state);
-
-	if (c_state->out_fb)
-		_dpu_connector_destroy_fb(c_conn, c_state);
-
-	if (!c_conn) {
-		kfree(c_state);
-	} else {
-		/* destroy value helper */
-		msm_property_destroy_state(&c_conn->property_info, c_state,
-				&c_state->property_state);
-	}
-}
-
-static void dpu_connector_atomic_reset(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn;
-	struct dpu_connector_state *c_state;
-
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return;
-	}
-
-	c_conn = to_dpu_connector(connector);
-
-	if (connector->state) {
-		dpu_connector_atomic_destroy_state(connector, connector->state);
-		connector->state = 0;
-	}
-
-	c_state = msm_property_alloc_state(&c_conn->property_info);
-	if (!c_state) {
-		DPU_ERROR("state alloc failed\n");
-		return;
-	}
-
-	/* reset value helper, zero out state structure and reset properties */
-	msm_property_reset_state(&c_conn->property_info, c_state,
-			&c_state->property_state,
-			c_state->property_values);
-
-	c_state->base.connector = connector;
-	connector->state = &c_state->base;
-}
-
-static struct drm_connector_state *
-dpu_connector_atomic_duplicate_state(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn;
-	struct dpu_connector_state *c_state, *c_oldstate;
-
-	if (!connector || !connector->state) {
-		DPU_ERROR("invalid connector %pK\n", connector);
-		return NULL;
-	}
-
-	c_conn = to_dpu_connector(connector);
-	c_oldstate = to_dpu_connector_state(connector->state);
-	c_state = msm_property_alloc_state(&c_conn->property_info);
-	if (!c_state) {
-		DPU_ERROR("state alloc failed\n");
-		return NULL;
-	}
-
-	/* duplicate value helper */
-	msm_property_duplicate_state(&c_conn->property_info,
-			c_oldstate, c_state,
-			&c_state->property_state, c_state->property_values);
-
-	/* additional handling for drm framebuffer objects */
-	if (c_state->out_fb)
-		drm_framebuffer_get(c_state->out_fb);
-
-	return &c_state->base;
-}
-
-static int _dpu_connector_update_bl_scale(struct dpu_connector *c_conn,
-		int idx,
-		uint64_t value)
-{
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-	struct dsi_display *dsi_display = c_conn->display;
-	struct dsi_backlight_config *bl_config;
-	int rc = 0;
-
-	if (!dsi_display || !dsi_display->panel) {
-		pr_err("Invalid params(s) dsi_display %pK, panel %pK\n",
-			dsi_display,
-			((dsi_display) ? dsi_display->panel : NULL));
-		return -EINVAL;
-	}
-
-	bl_config = &dsi_display->panel->bl_config;
-	if (idx == CONNECTOR_PROP_BL_SCALE) {
-		bl_config->bl_scale = value;
-		if (value > MAX_BL_SCALE_LEVEL)
-			bl_config->bl_scale = MAX_BL_SCALE_LEVEL;
-		DPU_DEBUG("set to panel: bl_scale = %u, bl_level = %u\n",
-			bl_config->bl_scale, bl_config->bl_level);
-		rc = c_conn->ops.set_backlight(dsi_display,
-					       bl_config->bl_level);
-	} else if (idx == CONNECTOR_PROP_AD_BL_SCALE) {
-		bl_config->bl_scale_ad = value;
-		if (value > MAX_AD_BL_SCALE_LEVEL)
-			bl_config->bl_scale_ad = MAX_AD_BL_SCALE_LEVEL;
-		DPU_DEBUG("set to panel: bl_scale_ad = %u, bl_level = %u\n",
-			bl_config->bl_scale_ad, bl_config->bl_level);
-		rc = c_conn->ops.set_backlight(dsi_display,
-					       bl_config->bl_level);
-	}
-	return rc;
-#else
-	return 0;
-#endif
-}
-
-static int dpu_connector_atomic_set_property(struct drm_connector *connector,
-		struct drm_connector_state *state,
-		struct drm_property *property,
-		uint64_t val)
-{
-	struct dpu_connector *c_conn;
-	struct dpu_connector_state *c_state;
-	int idx, rc;
-
-	if (!connector || !state || !property) {
-		DPU_ERROR("invalid argument(s), conn %pK, state %pK, prp %pK\n",
-				connector, state, property);
-		return -EINVAL;
-	}
-
-	c_conn = to_dpu_connector(connector);
-	c_state = to_dpu_connector_state(state);
-
-	/* generic property handling */
-	rc = msm_property_atomic_set(&c_conn->property_info,
-			&c_state->property_state, property, val);
-	if (rc)
-		goto end;
-
-	/* connector-specific property handling */
-	idx = msm_property_index(&c_conn->property_info, property);
-	switch (idx) {
-	case CONNECTOR_PROP_OUT_FB:
-		/* clear old fb, if present */
-		if (c_state->out_fb)
-			_dpu_connector_destroy_fb(c_conn, c_state);
-
-		/* convert fb val to drm framebuffer and prepare it */
-		c_state->out_fb =
-			drm_framebuffer_lookup(connector->dev, NULL, val);
-		if (!c_state->out_fb && val) {
-			DPU_ERROR("failed to look up fb %lld\n", val);
-			rc = -EFAULT;
-		} else if (!c_state->out_fb && !val) {
-			DPU_DEBUG("cleared fb_id\n");
-			rc = 0;
-		}
-		break;
-	case CONNECTOR_PROP_BL_SCALE:
-	case CONNECTOR_PROP_AD_BL_SCALE:
-		rc = _dpu_connector_update_bl_scale(c_conn, idx, val);
-		break;
-	default:
-		break;
-	}
-
-	/* check for custom property handling */
-	if (!rc && c_conn->ops.set_property) {
-		rc = c_conn->ops.set_property(connector,
-				state,
-				idx,
-				val,
-				c_conn->display);
-
-		/* potentially clean up out_fb if rc != 0 */
-		if ((idx == CONNECTOR_PROP_OUT_FB) && rc)
-			_dpu_connector_destroy_fb(c_conn, c_state);
-	}
-end:
-	return rc;
-}
-
-static int dpu_connector_set_property(struct drm_connector *connector,
-		struct drm_property *property,
-		uint64_t val)
-{
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return -EINVAL;
-	}
-
-	return dpu_connector_atomic_set_property(connector,
-			connector->state, property, val);
-}
-
-static int dpu_connector_atomic_get_property(struct drm_connector *connector,
-		const struct drm_connector_state *state,
-		struct drm_property *property,
-		uint64_t *val)
-{
-	struct dpu_connector *c_conn;
-	struct dpu_connector_state *c_state;
-	int idx, rc = -EINVAL;
-
-	if (!connector || !state) {
-		DPU_ERROR("invalid argument(s), conn %pK, state %pK\n",
-				connector, state);
-		return -EINVAL;
-	}
-
-	c_conn = to_dpu_connector(connector);
-	c_state = to_dpu_connector_state(state);
-
-	idx = msm_property_index(&c_conn->property_info, property);
-	/* get cached property value */
-	rc = msm_property_atomic_get(&c_conn->property_info,
-			&c_state->property_state, property, val);
-
-	/* allow for custom override */
-	if (c_conn->ops.get_property)
-		rc = c_conn->ops.get_property(connector,
-				(struct drm_connector_state *)state,
-				idx,
-				val,
-				c_conn->display);
-	return rc;
-}
-
-static enum drm_connector_status
-dpu_connector_detect(struct drm_connector *connector, bool force)
-{
-	enum drm_connector_status status = connector_status_unknown;
-	struct dpu_connector *c_conn;
-
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return status;
-	}
-
-	c_conn = to_dpu_connector(connector);
-
-	if (c_conn->ops.detect)
-		status = c_conn->ops.detect(connector,
-				force,
-				c_conn->display);
-
-	return status;
-}
-
-int dpu_connector_get_dpms(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn;
-	int rc;
-
-	if (!connector) {
-		DPU_DEBUG("invalid connector\n");
-		return DRM_MODE_DPMS_OFF;
-	}
-
-	c_conn = to_dpu_connector(connector);
-
-	mutex_lock(&c_conn->lock);
-	rc = c_conn->dpms_mode;
-	mutex_unlock(&c_conn->lock);
-
-	return rc;
-}
-
-int dpu_connector_set_property_for_commit(struct drm_connector *connector,
-		struct drm_atomic_state *atomic_state,
-		uint32_t property_idx, uint64_t value)
-{
-	struct drm_connector_state *state;
-	struct drm_property *property;
-	struct dpu_connector *c_conn;
-
-	if (!connector || !atomic_state) {
-		DPU_ERROR("invalid argument(s), conn %d, state %d\n",
-				connector != NULL, atomic_state != NULL);
-		return -EINVAL;
-	}
-
-	c_conn = to_dpu_connector(connector);
-	property = msm_property_index_to_drm_property(
-			&c_conn->property_info, property_idx);
-	if (!property) {
-		DPU_ERROR("invalid property index %d\n", property_idx);
-		return -EINVAL;
-	}
-
-	state = drm_atomic_get_connector_state(atomic_state, connector);
-	if (IS_ERR_OR_NULL(state)) {
-		DPU_ERROR("failed to get conn %d state\n",
-				connector->base.id);
-		return -EINVAL;
-	}
-
-	return dpu_connector_atomic_set_property(
-			connector, state, property, value);
-}
-
-#ifdef CONFIG_DEBUG_FS
-/**
- * dpu_connector_init_debugfs - initialize connector debugfs
- * @connector: Pointer to drm connector
- */
-static int dpu_connector_init_debugfs(struct drm_connector *connector)
-{
-	struct dpu_connector *dpu_connector;
-
-	if (!connector || !connector->debugfs_entry) {
-		DPU_ERROR("invalid connector\n");
-		return -EINVAL;
-	}
-
-	dpu_connector = to_dpu_connector(connector);
-
-	if (!debugfs_create_bool("fb_kmap", 0600, connector->debugfs_entry,
-			&dpu_connector->fb_kmap)) {
-		DPU_ERROR("failed to create connector fb_kmap\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-#else
-static int dpu_connector_init_debugfs(struct drm_connector *connector)
-{
-	return 0;
-}
-#endif
-
-static int dpu_connector_late_register(struct drm_connector *connector)
-{
-	return dpu_connector_init_debugfs(connector);
-}
-
-static void dpu_connector_early_unregister(struct drm_connector *connector)
-{
-	/* debugfs under connector->debugfs are deleted by drm_debugfs */
-}
-
-static const struct drm_connector_funcs dpu_connector_ops = {
-	.reset =                  dpu_connector_atomic_reset,
-	.detect =                 dpu_connector_detect,
-	.destroy =                dpu_connector_destroy,
-	.fill_modes =             drm_helper_probe_single_connector_modes,
-	.atomic_duplicate_state = dpu_connector_atomic_duplicate_state,
-	.atomic_destroy_state =   dpu_connector_atomic_destroy_state,
-	.atomic_set_property =    dpu_connector_atomic_set_property,
-	.atomic_get_property =    dpu_connector_atomic_get_property,
-	.set_property =           dpu_connector_set_property,
-	.late_register =          dpu_connector_late_register,
-	.early_unregister =       dpu_connector_early_unregister,
-};
-
-static int dpu_connector_get_modes(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn;
-
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return 0;
-	}
-
-	c_conn = to_dpu_connector(connector);
-	if (!c_conn->ops.get_modes) {
-		DPU_DEBUG("missing get_modes callback\n");
-		return 0;
-	}
-
-	return c_conn->ops.get_modes(connector, c_conn->display);
-}
-
-static enum drm_mode_status
-dpu_connector_mode_valid(struct drm_connector *connector,
-		struct drm_display_mode *mode)
-{
-	struct dpu_connector *c_conn;
-
-	if (!connector || !mode) {
-		DPU_ERROR("invalid argument(s), conn %pK, mode %pK\n",
-				connector, mode);
-		return MODE_ERROR;
-	}
-
-	c_conn = to_dpu_connector(connector);
-
-	if (c_conn->ops.mode_valid)
-		return c_conn->ops.mode_valid(connector, mode, c_conn->display);
-
-	/* assume all modes okay by default */
-	return MODE_OK;
-}
-
-static struct drm_encoder *
-dpu_connector_best_encoder(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn = to_dpu_connector(connector);
-
-	if (!connector) {
-		DPU_ERROR("invalid connector\n");
-		return NULL;
-	}
-
-	/*
-	 * This is true for now, revisit this code when multiple encoders are
-	 * supported.
-	 */
-	return c_conn->encoder;
-}
-
-static const struct drm_connector_helper_funcs dpu_connector_helper_ops = {
-	.get_modes =    dpu_connector_get_modes,
-	.mode_valid =   dpu_connector_mode_valid,
-	.best_encoder = dpu_connector_best_encoder,
-};
-
-struct drm_connector *dpu_connector_init(struct drm_device *dev,
-		struct drm_encoder *encoder,
-		struct drm_panel *panel,
-		void *display,
-		const struct dpu_connector_ops *ops,
-		int connector_poll,
-		int connector_type)
-{
-	struct msm_drm_private *priv;
-	struct dpu_kms *dpu_kms;
-	struct dpu_kms_info *info;
-	struct dpu_connector *c_conn = NULL;
-	struct msm_display_info display_info;
-	int rc;
-
-	if (!dev || !dev->dev_private || !encoder) {
-		DPU_ERROR("invalid argument(s), dev %pK, enc %pK\n",
-				dev, encoder);
-		return ERR_PTR(-EINVAL);
-	}
-
-	priv = dev->dev_private;
-	if (!priv->kms) {
-		DPU_ERROR("invalid kms reference\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	c_conn = kzalloc(sizeof(*c_conn), GFP_KERNEL);
-	if (!c_conn) {
-		DPU_ERROR("failed to alloc dpu connector\n");
-		return ERR_PTR(-ENOMEM);
-	}
-
-	memset(&display_info, 0, sizeof(display_info));
-
-	rc = drm_connector_init(dev,
-			&c_conn->base,
-			&dpu_connector_ops,
-			connector_type);
-	if (rc)
-		goto error_free_conn;
-
-	spin_lock_init(&c_conn->event_lock);
-
-	c_conn->connector_type = connector_type;
-	c_conn->encoder = encoder;
-	c_conn->panel = panel;
-	c_conn->display = display;
-
-	c_conn->dpms_mode = DRM_MODE_DPMS_ON;
-	c_conn->lp_mode = 0;
-	c_conn->last_panel_power_mode = DPU_MODE_DPMS_ON;
-
-	dpu_kms = to_dpu_kms(priv->kms);
-
-	if (ops)
-		c_conn->ops = *ops;
-
-	c_conn->base.helper_private = &dpu_connector_helper_ops;
-	c_conn->base.polled = connector_poll;
-	c_conn->base.interlace_allowed = 0;
-	c_conn->base.doublescan_allowed = 0;
-
-	snprintf(c_conn->name,
-			DPU_CONNECTOR_NAME_SIZE,
-			"conn%u",
-			c_conn->base.base.id);
-
-	mutex_init(&c_conn->lock);
-
-	rc = drm_mode_connector_attach_encoder(&c_conn->base, encoder);
-	if (rc) {
-		DPU_ERROR("failed to attach encoder to connector, %d\n", rc);
-		goto error_cleanup_conn;
-	}
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-	rc = dpu_backlight_setup(c_conn, dev);
-	if (rc) {
-		DPU_ERROR("failed to setup backlight, rc=%d\n", rc);
-		goto error_cleanup_conn;
-	}
-#endif
-
-	/* create properties */
-	msm_property_init(&c_conn->property_info, &c_conn->base.base, dev,
-			priv->conn_property, c_conn->property_data,
-			CONNECTOR_PROP_COUNT, CONNECTOR_PROP_BLOBCOUNT,
-			sizeof(struct dpu_connector_state));
-
-	if (c_conn->ops.post_init) {
-		info = kmalloc(sizeof(*info), GFP_KERNEL);
-		if (!info) {
-			DPU_ERROR("failed to allocate info buffer\n");
-			rc = -ENOMEM;
-			goto error_cleanup_conn;
-		}
-
-		dpu_kms_info_reset(info);
-		rc = c_conn->ops.post_init(&c_conn->base, info, display);
-		if (rc) {
-			DPU_ERROR("post-init failed, %d\n", rc);
-			kfree(info);
-			goto error_cleanup_conn;
-		}
-
-		msm_property_install_blob(&c_conn->property_info,
-				"capabilities",
-				DRM_MODE_PROP_IMMUTABLE,
-				CONNECTOR_PROP_DPU_INFO);
-
-		msm_property_set_blob(&c_conn->property_info,
-				&c_conn->blob_caps,
-				DPU_KMS_INFO_DATA(info),
-				DPU_KMS_INFO_DATALEN(info),
-				CONNECTOR_PROP_DPU_INFO);
-		kfree(info);
-	}
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-	if (connector_type == DRM_MODE_CONNECTOR_DSI) {
-		struct dsi_display *dsi_display;
-
-		dsi_display = (struct dsi_display *)(display);
-		if (dsi_display && dsi_display->panel &&
-			dsi_display->panel->hdr_props.hdr_enabled == true) {
-			msm_property_install_blob(&c_conn->property_info,
-				"hdr_properties",
-				DRM_MODE_PROP_IMMUTABLE,
-				CONNECTOR_PROP_HDR_INFO);
-
-			msm_property_set_blob(&c_conn->property_info,
-				&c_conn->blob_hdr,
-				&dsi_display->panel->hdr_props,
-				sizeof(dsi_display->panel->hdr_props),
-				CONNECTOR_PROP_HDR_INFO);
-		}
-	}
-
-	/* install PP_DITHER properties */
-	_dpu_connector_install_dither_property(dev, dpu_kms, c_conn);
-
-	msm_property_install_range(&c_conn->property_info, "bl_scale",
-		0x0, 0, MAX_BL_SCALE_LEVEL, MAX_BL_SCALE_LEVEL,
-		CONNECTOR_PROP_BL_SCALE);
-
-	msm_property_install_range(&c_conn->property_info, "ad_bl_scale",
-		0x0, 0, MAX_AD_BL_SCALE_LEVEL, MAX_AD_BL_SCALE_LEVEL,
-		CONNECTOR_PROP_AD_BL_SCALE);
-#endif
-
-	/* enum/bitmask properties */
-	msm_property_install_enum(&c_conn->property_info, "topology_name",
-			DRM_MODE_PROP_IMMUTABLE, 0, e_topology_name,
-			ARRAY_SIZE(e_topology_name),
-			CONNECTOR_PROP_TOPOLOGY_NAME);
-	msm_property_install_enum(&c_conn->property_info, "topology_control",
-			0, 1, e_topology_control,
-			ARRAY_SIZE(e_topology_control),
-			CONNECTOR_PROP_TOPOLOGY_CONTROL);
-	msm_property_install_enum(&c_conn->property_info, "LP",
-			0, 0, e_power_mode,
-			ARRAY_SIZE(e_power_mode),
-			CONNECTOR_PROP_LP);
-
-	rc = msm_property_install_get_status(&c_conn->property_info);
-	if (rc) {
-		DPU_ERROR("failed to create one or more properties\n");
-		goto error_destroy_property;
-	}
-
-	DPU_DEBUG("connector %d attach encoder %d\n",
-			c_conn->base.base.id, encoder->base.id);
-
-	priv->connectors[priv->num_connectors++] = &c_conn->base;
-
-	return &c_conn->base;
-
-error_destroy_property:
-	if (c_conn->blob_caps)
-		drm_property_blob_put(c_conn->blob_caps);
-	if (c_conn->blob_hdr)
-		drm_property_blob_put(c_conn->blob_hdr);
-	if (c_conn->blob_dither)
-		drm_property_blob_put(c_conn->blob_dither);
-
-	msm_property_destroy(&c_conn->property_info);
-error_cleanup_conn:
-	mutex_destroy(&c_conn->lock);
-	drm_connector_cleanup(&c_conn->base);
-error_free_conn:
-	kfree(c_conn);
-
-	return ERR_PTR(rc);
-}
-
-int dpu_connector_register_custom_event(struct dpu_kms *kms,
-		struct drm_connector *conn_drm, u32 event, bool val)
-{
-	int ret = -EINVAL;
-
-	switch (event) {
-	case DRM_EVENT_SYS_BACKLIGHT:
-		ret = 0;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_connector.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_connector.h
deleted file mode 100644
index ed516fb..0000000
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_connector.h
+++ /dev/null
@@ -1,555 +0,0 @@
-/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _DPU_CONNECTOR_H_
-#define _DPU_CONNECTOR_H_
-
-#include <uapi/drm/msm_drm_pp.h>
-#include <drm/drmP.h>
-#include <drm/drm_atomic.h>
-#include <drm/drm_panel.h>
-
-#include "msm_drv.h"
-#include "msm_prop.h"
-#include "dpu_kms.h"
-
-#define DPU_CONNECTOR_NAME_SIZE	16
-
-struct dpu_connector;
-struct dpu_connector_state;
-
-/**
- * struct dpu_connector_ops - callback functions for generic dpu connector
- * Individual callbacks documented below.
- */
-struct dpu_connector_ops {
-	/**
-	 * post_init - perform additional initialization steps
-	 * @connector: Pointer to drm connector structure
-	 * @info: Pointer to dpu connector info structure
-	 * @display: Pointer to private display handle
-	 * Returns: Zero on success
-	 */
-	int (*post_init)(struct drm_connector *connector,
-			void *info,
-			void *display);
-
-	/**
-	 * detect - determine if connector is connected
-	 * @connector: Pointer to drm connector structure
-	 * @force: Force detect setting from drm framework
-	 * @display: Pointer to private display handle
-	 * Returns: Connector 'is connected' status
-	 */
-	enum drm_connector_status (*detect)(struct drm_connector *connector,
-			bool force,
-			void *display);
-
-	/**
-	 * get_modes - add drm modes via drm_mode_probed_add()
-	 * @connector: Pointer to drm connector structure
-	 * @display: Pointer to private display handle
-	 * Returns: Number of modes added
-	 */
-	int (*get_modes)(struct drm_connector *connector,
-			void *display);
-
-	/**
-	 * put_modes - free up drm modes of the connector
-	 * @connector: Pointer to drm connector structure
-	 * @display: Pointer to private display handle
-	 */
-	void (*put_modes)(struct drm_connector *connector,
-			void *display);
-
-	/**
-	 * update_pps - update pps command for the display panel
-	 * @pps_cmd: Pointer to pps command
-	 * @display: Pointer to private display handle
-	 * Returns: Zero on success
-	 */
-	int (*update_pps)(char *pps_cmd, void *display);
-
-	/**
-	 * mode_valid - determine if specified mode is valid
-	 * @connector: Pointer to drm connector structure
-	 * @mode: Pointer to drm mode structure
-	 * @display: Pointer to private display handle
-	 * Returns: Validity status for specified mode
-	 */
-	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
-			struct drm_display_mode *mode,
-			void *display);
-
-	/**
-	 * set_property - set property value
-	 * @connector: Pointer to drm connector structure
-	 * @state: Pointer to drm connector state structure
-	 * @property_index: DRM property index
-	 * @value: Incoming property value
-	 * @display: Pointer to private display structure
-	 * Returns: Zero on success
-	 */
-	int (*set_property)(struct drm_connector *connector,
-			struct drm_connector_state *state,
-			int property_index,
-			uint64_t value,
-			void *display);
-
-	/**
-	 * get_property - get property value
-	 * @connector: Pointer to drm connector structure
-	 * @state: Pointer to drm connector state structure
-	 * @property_index: DRM property index
-	 * @value: Pointer to variable for accepting property value
-	 * @display: Pointer to private display structure
-	 * Returns: Zero on success
-	 */
-	int (*get_property)(struct drm_connector *connector,
-			struct drm_connector_state *state,
-			int property_index,
-			uint64_t *value,
-			void *display);
-
-	/**
-	 * get_info - get display information
-	 * @info: Pointer to msm display info structure
-	 * @display: Pointer to private display structure
-	 * Returns: Zero on success
-	 */
-	int (*get_info)(struct msm_display_info *info, void *display);
-
-	/**
-	 * get_mode_info - retrieve mode information
-	 * @drm_mode: Display mode set for the display
-	 * @mode_info: Out parameter. information of the display mode
-	 * @max_mixer_width: max width supported by HW layer mixer
-	 * Returns: Zero on success
-	 */
-	int (*get_mode_info)(const struct drm_display_mode *drm_mode,
-			struct msm_mode_info *mode_info,
-			u32 max_mixer_width);
-
-	/**
-	 * enable_event - notify display of event registration/unregistration
-	 * @connector: Pointer to drm connector structure
-	 * @event_idx: DPU connector event index
-	 * @enable: Whether the event is being enabled/disabled
-	 * @display: Pointer to private display structure
-	 */
-	void (*enable_event)(struct drm_connector *connector,
-			uint32_t event_idx, bool enable, void *display);
-
-	int (*set_backlight)(void *display, u32 bl_lvl);
-
-	/**
-	 * soft_reset - perform a soft reset on the connector
-	 * @display: Pointer to private display structure
-	 * Return: Zero on success, -ERROR otherwise
-	 */
-	int (*soft_reset)(void *display);
-
-	/**
-	 * pre_kickoff - trigger display to program kickoff-time features
-	 * @connector: Pointer to drm connector structure
-	 * @display: Pointer to private display structure
-	 * Returns: Zero on success
-	 */
-	int (*pre_kickoff)(struct drm_connector *connector,
-			void *display);
-
-	/**
-	 * clk_ctrl - perform clk enable/disable on the connector
-	 * @handle: Pointer to clk handle
-	 * @type: Type of clks
-	 * @enable: State of clks
-	 */
-	int (*clk_ctrl)(void *handle, u32 type, u32 state);
-
-	/**
-	 * set_power - update dpms setting
-	 * @connector: Pointer to drm connector structure
-	 * @power_mode: One of the following,
-	 *              DPU_MODE_DPMS_ON
-	 *              DPU_MODE_DPMS_LP1
-	 *              DPU_MODE_DPMS_LP2
-	 *              DPU_MODE_DPMS_OFF
-	 * @display: Pointer to private display structure
-	 * Returns: Zero on success
-	 */
-	int (*set_power)(struct drm_connector *connector,
-			int power_mode, void *display);
-
-	/**
-	 * get_dst_format - get dst_format from display
-	 * @display: Pointer to private display handle
-	 * Returns: dst_format of display
-	 */
-	enum dsi_pixel_format (*get_dst_format)(void *display);
-
-	/**
-	 * post_kickoff - display to program post kickoff-time features
-	 * @connector: Pointer to drm connector structure
-	 * Returns: Zero on success
-	 */
-	int (*post_kickoff)(struct drm_connector *connector);
-
-	/**
-	 * send_hpd_event - send HPD uevent notification to userspace
-	 * @display: Pointer to private display structure
-	 */
-	void (*send_hpd_event)(void *display);
-};
-
-/**
- * enum dpu_connector_events - list of recognized connector events
- */
-enum dpu_connector_events {
-	DPU_CONN_EVENT_VID_DONE, /* video mode frame done */
-	DPU_CONN_EVENT_CMD_DONE, /* command mode frame done */
-	DPU_CONN_EVENT_COUNT,
-};
-
-/**
- * struct dpu_connector_evt - local event registration entry structure
- * @cb_func: Pointer to desired callback function
- * @usr: User pointer to pass to callback on event trigger
- */
-struct dpu_connector_evt {
-	void (*cb_func)(uint32_t event_idx,
-			uint32_t instance_idx, void *usr,
-			uint32_t data0, uint32_t data1,
-			uint32_t data2, uint32_t data3);
-	void *usr;
-};
-
-/**
- * struct dpu_connector - local dpu connector structure
- * @base: Base drm connector structure
- * @connector_type: Set to one of DRM_MODE_CONNECTOR_ types
- * @encoder: Pointer to preferred drm encoder
- * @panel: Pointer to drm panel, if present
- * @display: Pointer to private display data structure
- * @mmu_secure: MMU id for secure buffers
- * @mmu_unsecure: MMU id for unsecure buffers
- * @name: ASCII name of connector
- * @lock: Mutex lock object for this structure
- * @ops: Local callback function pointer table
- * @dpms_mode: DPMS property setting from user space
- * @lp_mode: LP property setting from user space
- * @last_panel_power_mode: Last consolidated dpms/lp mode setting
- * @property_info: Private structure for generic property handling
- * @property_data: Array of private data for generic property handling
- * @blob_caps: Pointer to blob structure for 'capabilities' property
- * @blob_hdr: Pointer to blob structure for 'hdr_properties' property
- * @blob_dither: Pointer to blob structure for default dither config
- * @fb_kmap: true if kernel mapping of framebuffer is requested
- * @event_table: Array of registered events
- * @event_lock: Lock object for event_table
- * @bl_device: backlight device node
- */
-struct dpu_connector {
-	struct drm_connector base;
-
-	int connector_type;
-
-	struct drm_encoder *encoder;
-	struct drm_panel *panel;
-	void *display;
-
-	struct msm_gem_address_space *aspace[DPU_IOMMU_DOMAIN_MAX];
-
-	char name[DPU_CONNECTOR_NAME_SIZE];
-
-	struct mutex lock;
-	struct dpu_connector_ops ops;
-	int dpms_mode;
-	int lp_mode;
-	int last_panel_power_mode;
-
-	struct msm_property_info property_info;
-	struct msm_property_data property_data[CONNECTOR_PROP_COUNT];
-	struct drm_property_blob *blob_caps;
-	struct drm_property_blob *blob_hdr;
-	struct drm_property_blob *blob_dither;
-
-	bool fb_kmap;
-	struct dpu_connector_evt event_table[DPU_CONN_EVENT_COUNT];
-	spinlock_t event_lock;
-
-	struct backlight_device *bl_device;
-};
-
-/**
- * to_dpu_connector - convert drm_connector pointer to dpu connector pointer
- * @X: Pointer to drm_connector structure
- * Returns: Pointer to dpu_connector structure
- */
-#define to_dpu_connector(x)     container_of((x), struct dpu_connector, base)
-
-/**
- * dpu_connector_get_display - get dpu connector's private display pointer
- * @C: Pointer to drm connector structure
- * Returns: Pointer to associated private display structure
- */
-#define dpu_connector_get_display(C) \
-	((C) ? to_dpu_connector((C))->display : 0)
-
-/**
- * dpu_connector_get_panel - get dpu connector's private panel pointer
- * @C: Pointer to drm connector structure
- * Returns: Pointer to associated private display structure
- */
-#define dpu_connector_get_panel(C) \
-	((C) ? to_dpu_connector((C))->panel : NULL)
-
-/**
- * dpu_connector_get_encoder - get dpu connector's private encoder pointer
- * @C: Pointer to drm connector structure
- * Returns: Pointer to associated private encoder structure
- */
-#define dpu_connector_get_encoder(C) \
-	((C) ? to_dpu_connector((C))->encoder : 0)
-
-/**
- * dpu_connector_get_propinfo - get dpu connector's property info pointer
- * @C: Pointer to drm connector structure
- * Returns: Pointer to associated private property info structure
- */
-#define dpu_connector_get_propinfo(C) \
-	((C) ? &to_dpu_connector((C))->property_info : 0)
-
-/**
- * struct dpu_connector_state - private connector status structure
- * @base: Base drm connector structure
- * @out_fb: Pointer to output frame buffer, if applicable
- * @property_state: Local storage for msm_prop properties
- * @property_values: Local cache of current connector property values
- * @property_blobs: blob properties
- */
-struct dpu_connector_state {
-	struct drm_connector_state base;
-	struct drm_framebuffer *out_fb;
-	struct msm_property_state property_state;
-	struct msm_property_value property_values[CONNECTOR_PROP_COUNT];
-
-	struct drm_property_blob *property_blobs[CONNECTOR_PROP_BLOBCOUNT];
-};
-
-/**
- * to_dpu_connector_state - convert drm_connector_state pointer to
- *                          dpu connector state pointer
- * @X: Pointer to drm_connector_state structure
- * Returns: Pointer to dpu_connector_state structure
- */
-#define to_dpu_connector_state(x) \
-	container_of((x), struct dpu_connector_state, base)
-
-/**
- * dpu_connector_get_property - query integer value of connector property
- * @S: Pointer to drm connector state
- * @X: Property index, from enum msm_mdp_connector_property
- * Returns: Integer value of requested property
- */
-#define dpu_connector_get_property(S, X) \
-	((S) && ((X) < CONNECTOR_PROP_COUNT) ? \
-	 (to_dpu_connector_state((S))->property_values[(X)].value) : 0)
-
-/**
- * dpu_connector_get_property_state - retrieve property state cache
- * @S: Pointer to drm connector state
- * Returns: Pointer to local property state structure
- */
-#define dpu_connector_get_property_state(S) \
-	((S) ? (&to_dpu_connector_state((S))->property_state) : NULL)
-
-/**
- * dpu_connector_get_out_fb - query out_fb value from dpu connector state
- * @S: Pointer to drm connector state
- * Returns: Output fb associated with specified connector state
- */
-#define dpu_connector_get_out_fb(S) \
-	((S) ? to_dpu_connector_state((S))->out_fb : 0)
-
-/**
- * dpu_connector_get_topology_name - helper accessor to retrieve topology_name
- * @connector: pointer to drm connector
- * Returns: value of the CONNECTOR_PROP_TOPOLOGY_NAME property or 0
- */
-static inline uint64_t dpu_connector_get_topology_name(
-		struct drm_connector *connector)
-{
-	if (!connector || !connector->state)
-		return 0;
-	return dpu_connector_get_property(connector->state,
-			CONNECTOR_PROP_TOPOLOGY_NAME);
-}
-
-/**
- * dpu_connector_get_lp - helper accessor to retrieve LP state
- * @connector: pointer to drm connector
- * Returns: value of the CONNECTOR_PROP_LP property or 0
- */
-static inline uint64_t dpu_connector_get_lp(
-		struct drm_connector *connector)
-{
-	if (!connector || !connector->state)
-		return 0;
-	return dpu_connector_get_property(connector->state,
-			CONNECTOR_PROP_LP);
-}
-
-/**
- * dpu_connector_set_property_for_commit - add property set to atomic state
- *	Add a connector state property update for the specified property index
- *	to the atomic state in preparation for a drm_atomic_commit.
- * @connector: Pointer to drm connector
- * @atomic_state: Pointer to DRM atomic state structure for commit
- * @property_idx: Connector property index
- * @value: Updated property value
- * Returns: Zero on success
- */
-int dpu_connector_set_property_for_commit(struct drm_connector *connector,
-		struct drm_atomic_state *atomic_state,
-		uint32_t property_idx, uint64_t value);
-
-/**
- * dpu_connector_init - create drm connector object for a given display
- * @dev: Pointer to drm device struct
- * @encoder: Pointer to associated encoder
- * @panel: Pointer to associated panel, can be NULL
- * @display: Pointer to associated display object
- * @ops: Pointer to callback operations function table
- * @connector_poll: Set to appropriate DRM_CONNECTOR_POLL_ setting
- * @connector_type: Set to appropriate DRM_MODE_CONNECTOR_ type
- * Returns: Pointer to newly created drm connector struct
- */
-struct drm_connector *dpu_connector_init(struct drm_device *dev,
-		struct drm_encoder *encoder,
-		struct drm_panel *panel,
-		void *display,
-		const struct dpu_connector_ops *ops,
-		int connector_poll,
-		int connector_type);
-
-/**
- * dpu_connector_get_info - query display specific information
- * @connector: Pointer to drm connector object
- * @info: Pointer to msm display information structure
- * Returns: Zero on success
- */
-int dpu_connector_get_info(struct drm_connector *connector,
-		struct msm_display_info *info);
-
-/**
- * dpu_connector_clk_ctrl - enables/disables the connector clks
- * @connector: Pointer to drm connector object
- * @enable: true/false to enable/disable
- */
-void dpu_connector_clk_ctrl(struct drm_connector *connector, bool enable);
-
-/**
- * dpu_connector_get_dpms - query dpms setting
- * @connector: Pointer to drm connector structure
- * Returns: Current DPMS setting for connector
- */
-int dpu_connector_get_dpms(struct drm_connector *connector);
-
-/**
- * dpu_connector_trigger_event - indicate that an event has occurred
- *	Any callbacks that have been registered against this event will
- *	be called from the same thread context.
- * @connector: Pointer to drm connector structure
- * @event_idx: Index of event to trigger
- * @instance_idx: Event-specific "instance index" to pass to callback
- * @data0: Event-specific "data" to pass to callback
- * @data1: Event-specific "data" to pass to callback
- * @data2: Event-specific "data" to pass to callback
- * @data3: Event-specific "data" to pass to callback
- * Returns: Zero on success
- */
-int dpu_connector_trigger_event(void *drm_connector,
-		uint32_t event_idx, uint32_t instance_idx,
-		uint32_t data0, uint32_t data1,
-		uint32_t data2, uint32_t data3);
-
-/**
- * dpu_connector_register_event - register a callback function for an event
- * @connector: Pointer to drm connector structure
- * @event_idx: Index of event to register
- * @cb_func: Pointer to desired callback function
- * @usr: User pointer to pass to callback on event trigger
- * Returns: Zero on success
- */
-int dpu_connector_register_event(struct drm_connector *connector,
-		uint32_t event_idx,
-		void (*cb_func)(uint32_t event_idx,
-			uint32_t instance_idx, void *usr,
-			uint32_t data0, uint32_t data1,
-			uint32_t data2, uint32_t data3),
-		void *usr);
-
-/**
- * dpu_connector_unregister_event - unregister all callbacks for an event
- * @connector: Pointer to drm connector structure
- * @event_idx: Index of event to register
- */
-void dpu_connector_unregister_event(struct drm_connector *connector,
-		uint32_t event_idx);
-
-/**
- * dpu_connector_register_custom_event - register for async events
- * @kms: Pointer to dpu_kms
- * @conn_drm: Pointer to drm connector object
- * @event: Event for which request is being sent
- * @en: Flag to enable/disable the event
- * Returns: Zero on success
- */
-int dpu_connector_register_custom_event(struct dpu_kms *kms,
-		struct drm_connector *conn_drm, u32 event, bool en);
-
-/**
- * dpu_connector_pre_kickoff - trigger kickoff time feature programming
- * @connector: Pointer to drm connector object
- * Returns: Zero on success
- */
-int dpu_connector_pre_kickoff(struct drm_connector *connector);
-
-/**
- * dpu_connector_needs_offset - adjust the output fence offset based on
- *                              display type
- * @connector: Pointer to drm connector object
- * Returns: true if offset is required, false for all other cases.
- */
-static inline bool dpu_connector_needs_offset(struct drm_connector *connector)
-{
-	struct dpu_connector *c_conn;
-
-	if (!connector)
-		return false;
-
-	c_conn = to_dpu_connector(connector);
-	return (c_conn->connector_type != DRM_MODE_CONNECTOR_VIRTUAL);
-}
-
-/**
- * dpu_connector_get_dither_cfg - get dither property data
- * @conn: Pointer to drm_connector struct
- * @state: Pointer to drm_connector_state struct
- * @cfg: Pointer to pointer to dither cfg
- * @len: length of the dither data
- * Returns: Zero on success
- */
-int dpu_connector_get_dither_cfg(struct drm_connector *conn,
-		struct drm_connector_state *state, void **cfg, size_t *len);
-
-#endif /* _DPU_CONNECTOR_H_ */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index c0e8035..48920b05 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -33,7 +33,6 @@
 #include "dpu_plane.h"
 #include "dpu_color_processing.h"
 #include "dpu_encoder.h"
-#include "dpu_connector.h"
 #include "dpu_vbif.h"
 #include "dpu_power_handle.h"
 #include "dpu_core_perf.h"
@@ -3347,7 +3346,6 @@ static int dpu_crtc_atomic_get_property(struct drm_crtc *crtc,
 	struct dpu_crtc_state *cstate;
 	struct drm_encoder *encoder;
 	int i, ret = -EINVAL;
-	bool conn_offset = 0;
 	bool is_cmd = true;
 
 	if (!crtc || !state) {
@@ -3356,13 +3354,6 @@ static int dpu_crtc_atomic_get_property(struct drm_crtc *crtc,
 		dpu_crtc = to_dpu_crtc(crtc);
 		cstate = to_dpu_crtc_state(state);
 
-		for (i = 0; i < cstate->num_connectors; ++i) {
-			conn_offset = dpu_connector_needs_offset(
-						cstate->connectors[i]);
-			if (conn_offset)
-				break;
-		}
-
 		/**
 		 * set the cmd flag only when all the encoders attached
 		 * to the crtc are in cmd mode. Consider all other cases
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 3854410..4386360 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -70,6 +70,8 @@
 
 #define IDLE_SHORT_TIMEOUT	1
 
+#define MAX_VDISPLAY_SPLIT 1080
+
 /**
  * enum dpu_enc_rc_events - events for resource control state machine
  * @DPU_ENC_RC_EVENT_KICKOFF:
@@ -172,7 +174,6 @@ enum dpu_enc_rc_states {
  * @frame_done_timer:		watchdog timer for frame done event
  * @vsync_event_timer:		vsync timer
  * @disp_info:			local copy of msm_display_info struct
- * @mode_info:			local copy of msm_mode_info struct
  * @misr_enable:		misr enable/disable status
  * @misr_frame_count:		misr frame count before start capturing the data
  * @idle_pc_supported:		indicate if idle power collaps is supported
@@ -214,7 +215,6 @@ struct dpu_encoder_virt {
 	struct timer_list vsync_event_timer;
 
 	struct msm_display_info disp_info;
-	struct msm_mode_info mode_info;
 	bool misr_enable;
 	u32 misr_frame_count;
 
@@ -497,8 +497,6 @@ void dpu_encoder_get_hw_resources(struct drm_encoder *drm_enc,
 		if (phys && phys->ops.get_hw_resources)
 			phys->ops.get_hw_resources(phys, hw_res, conn_state);
 	}
-
-	hw_res->topology = dpu_enc->mode_info.topology;
 }
 
 void dpu_encoder_destroy(struct drm_encoder *drm_enc)
@@ -605,6 +603,25 @@ static void _dpu_encoder_adjust_mode(struct drm_connector *connector,
 	}
 }
 
+static struct msm_display_topology dpu_encoder_get_topology(
+			struct dpu_encoder_virt *dpu_enc,
+			struct dpu_kms *dpu_kms,
+			struct drm_display_mode *mode)
+{
+	struct msm_display_topology topology;
+	int i, intf_count = 0;
+
+	for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
+		if (dpu_enc->phys_encs[i])
+			intf_count++;
+
+	/* User split topology for width > 1080 */
+	topology.num_lm = (mode->vdisplay > MAX_VDISPLAY_SPLIT) ? 2 : 1;
+	topology.num_enc = 0;
+	topology.num_intf = intf_count;
+
+	return topology;
+}
 static int dpu_encoder_virt_atomic_check(
 		struct drm_encoder *drm_enc,
 		struct drm_crtc_state *crtc_state,
@@ -615,6 +632,7 @@ static int dpu_encoder_virt_atomic_check(
 	struct dpu_kms *dpu_kms;
 	const struct drm_display_mode *mode;
 	struct drm_display_mode *adj_mode;
+	struct msm_display_topology topology;
 	int i = 0;
 	int ret = 0;
 
@@ -660,6 +678,8 @@ static int dpu_encoder_virt_atomic_check(
 		}
 	}
 
+	topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode);
+
 	/* Reserve dynamic resources now. Indicating AtomicTest phase */
 	if (!ret) {
 		/*
@@ -669,7 +689,7 @@ static int dpu_encoder_virt_atomic_check(
 		if (drm_atomic_crtc_needs_modeset(crtc_state)
 				&& dpu_enc->mode_set_complete) {
 			ret = dpu_rm_reserve(&dpu_kms->rm, drm_enc, crtc_state,
-				conn_state, true);
+				conn_state, topology, true);
 			dpu_enc->mode_set_complete = false;
 		}
 	}
@@ -690,7 +710,6 @@ static void _dpu_encoder_update_vsync_source(struct dpu_encoder_virt *dpu_enc,
 	struct dpu_kms *dpu_kms;
 	struct dpu_hw_mdp *hw_mdptop;
 	struct drm_encoder *drm_enc;
-	struct msm_mode_info *mode_info;
 	int i;
 
 	if (!dpu_enc || !disp_info) {
@@ -720,19 +739,12 @@ static void _dpu_encoder_update_vsync_source(struct dpu_encoder_virt *dpu_enc,
 		return;
 	}
 
-	mode_info = &dpu_enc->mode_info;
-	if (!mode_info) {
-		DPU_ERROR("invalid mode info\n");
-		return;
-	}
-
 	if (hw_mdptop->ops.setup_vsync_source &&
 			disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) {
 		for (i = 0; i < dpu_enc->num_phys_encs; i++)
 			vsync_cfg.ppnumber[i] = dpu_enc->hw_pp[i]->idx;
 
 		vsync_cfg.pp_count = dpu_enc->num_phys_encs;
-		vsync_cfg.frame_rate = mode_info->frame_rate;
 		if (disp_info->is_te_using_watchdog_timer)
 			vsync_cfg.vsync_source = DPU_VSYNC_SOURCE_WD_TIMER_0;
 		else
@@ -789,9 +801,6 @@ static void _dpu_encoder_resource_control_helper(struct drm_encoder *drm_enc,
 		dpu_power_resource_enable(&priv->phandle,
 				dpu_kms->core_client, true);
 
-		/* enable DSI clks */
-		dpu_connector_clk_ctrl(dpu_enc->cur_master->connector, true);
-
 		/* enable all the irq */
 		_dpu_encoder_irq_control(drm_enc, true);
 
@@ -799,9 +808,6 @@ static void _dpu_encoder_resource_control_helper(struct drm_encoder *drm_enc,
 		/* disable all the irq */
 		_dpu_encoder_irq_control(drm_enc, false);
 
-		/* disable DSI clks */
-		dpu_connector_clk_ctrl(dpu_enc->cur_master->connector, false);
-
 		/* disable DPU core clks */
 		dpu_power_resource_enable(&priv->phandle,
 				dpu_kms->core_client, false);
@@ -813,7 +819,6 @@ static void _dpu_encoder_resource_control_helper(struct drm_encoder *drm_enc,
 static int dpu_encoder_resource_control(struct drm_encoder *drm_enc,
 		u32 sw_event)
 {
-	unsigned int lp, idle_timeout;
 	struct dpu_encoder_virt *dpu_enc;
 	struct msm_drm_private *priv;
 	struct msm_drm_thread *disp_thread;
@@ -919,25 +924,13 @@ static int dpu_encoder_resource_control(struct drm_encoder *drm_enc,
 			return 0;
 		}
 
-		/* set idle timeout based on master connector's lp value */
-		if (dpu_enc->cur_master)
-			lp = dpu_connector_get_lp(
-					dpu_enc->cur_master->connector);
-		else
-			lp = DPU_MODE_DPMS_ON;
-
-		if (lp == DPU_MODE_DPMS_LP2)
-			idle_timeout = IDLE_SHORT_TIMEOUT;
-		else
-			idle_timeout = dpu_enc->idle_timeout;
-
 		kthread_queue_delayed_work(
 			&disp_thread->worker,
 			&dpu_enc->delayed_off_work,
-			msecs_to_jiffies(idle_timeout));
+			msecs_to_jiffies(dpu_enc->idle_timeout));
 
 		DPU_EVT32(DRMID(drm_enc), sw_event, dpu_enc->rc_state,
-				idle_timeout, DPU_EVTLOG_FUNC_CASE2);
+				dpu_enc->idle_timeout, DPU_EVTLOG_FUNC_CASE2);
 		DPU_DEBUG_ENC(dpu_enc, "sw_event:%d, work scheduled\n",
 				sw_event);
 		break;
@@ -1132,8 +1125,9 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 	struct dpu_kms *dpu_kms;
 	struct list_head *connector_list;
 	struct drm_connector *conn = NULL, *conn_iter;
-	struct dpu_connector *dpu_conn = NULL;
 	struct dpu_rm_hw_iter pp_iter;
+	struct msm_display_topology topology;
+	enum dpu_rm_topology_name topology_name;
 	int i = 0, ret;
 
 	if (!drm_enc) {
@@ -1162,33 +1156,11 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 		return;
 	}
 
-	dpu_conn = to_dpu_connector(conn);
-	if (dpu_conn) {
-		ret = dpu_conn->ops.get_mode_info(adj_mode, &dpu_enc->mode_info,
-				dpu_kms->catalog->caps->max_mixer_width);
-		if (ret) {
-			DPU_ERROR_ENC(dpu_enc,
-				"invalid topology for the mode\n");
-			return;
-		}
-	}
-
-	/* release resources before seamless mode change */
-	if (msm_is_mode_seamless_dms(adj_mode)) {
-		/* restore resource state before releasing them */
-		ret = dpu_encoder_resource_control(drm_enc,
-				DPU_ENC_RC_EVENT_PRE_MODESET);
-		if (ret) {
-			DPU_ERROR_ENC(dpu_enc,
-					"dpu resource control failed: %d\n",
-					ret);
-			return;
-		}
-	}
+	topology = dpu_encoder_get_topology(dpu_enc, dpu_kms, adj_mode);
 
 	/* Reserve dynamic resources now. Indicating non-AtomicTest phase */
 	ret = dpu_rm_reserve(&dpu_kms->rm, drm_enc, drm_enc->crtc->state,
-			conn->state, false);
+			conn->state, topology, false);
 	if (ret) {
 		DPU_ERROR_ENC(dpu_enc,
 				"failed to reserve hw resources, %d\n", ret);
@@ -1203,6 +1175,7 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 		dpu_enc->hw_pp[i] = (struct dpu_hw_pingpong *) pp_iter.hw;
 	}
 
+	topology_name = dpu_rm_get_topology_name(topology);
 	for (i = 0; i < dpu_enc->num_phys_encs; i++) {
 		struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
 
@@ -1214,6 +1187,7 @@ static void dpu_encoder_virt_mode_set(struct drm_encoder *drm_enc,
 			}
 			phys->hw_pp = dpu_enc->hw_pp[i];
 			phys->connector = conn->state->connector;
+			phys->topology_name = topology_name;
 			if (phys->ops.mode_set)
 				phys->ops.mode_set(phys, mode, adj_mode);
 		}
@@ -1711,8 +1685,6 @@ int dpu_encoder_helper_wait_event_timeout(
 void dpu_encoder_helper_hw_reset(struct dpu_encoder_phys *phys_enc)
 {
 	struct dpu_encoder_virt *dpu_enc;
-	struct dpu_connector *dpu_con;
-	void *dpu_con_disp;
 	struct dpu_hw_ctl *ctl;
 	int rc;
 
@@ -1729,22 +1701,6 @@ void dpu_encoder_helper_hw_reset(struct dpu_encoder_phys *phys_enc)
 	DPU_DEBUG_ENC(dpu_enc, "ctl %d reset\n",  ctl->idx);
 	DPU_EVT32(DRMID(phys_enc->parent), ctl->idx);
 
-	if (phys_enc->ops.is_master && phys_enc->ops.is_master(phys_enc) &&
-			phys_enc->connector) {
-		dpu_con = to_dpu_connector(phys_enc->connector);
-		dpu_con_disp = dpu_connector_get_display(phys_enc->connector);
-
-		if (dpu_con->ops.soft_reset) {
-			rc = dpu_con->ops.soft_reset(dpu_con_disp);
-			if (rc) {
-				DPU_ERROR_ENC(dpu_enc,
-						"connector soft reset failure\n");
-				DPU_DBG_DUMP("all", "dbg_bus", "vbif_dbg_bus",
-								"panic");
-			}
-		}
-	}
-
 	rc = ctl->ops.reset(ctl);
 	if (rc) {
 		DPU_ERROR_ENC(dpu_enc, "ctl %d reset failure\n",  ctl->idx);
@@ -1862,22 +1818,6 @@ void dpu_encoder_trigger_kickoff_pending(struct drm_encoder *drm_enc)
 	}
 }
 
-static void _dpu_encoder_setup_dither(struct dpu_encoder_phys *phys)
-{
-	void *dither_cfg;
-	int ret = 0;
-	size_t len = 0;
-
-	if (!phys || !phys->connector || !phys->hw_pp ||
-			!phys->hw_pp->ops.setup_dither)
-		return;
-
-	ret = dpu_connector_get_dither_cfg(phys->connector,
-				phys->connector->state, &dither_cfg, &len);
-	if (!ret)
-		phys->hw_pp->ops.setup_dither(phys->hw_pp, dither_cfg, len);
-}
-
 static u32 _dpu_encoder_calculate_linetime(struct dpu_encoder_virt *dpu_enc,
 		struct drm_display_mode *mode)
 {
@@ -2028,7 +1968,6 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc,
 	struct dpu_encoder_phys *phys;
 	bool needs_hw_reset = false;
 	unsigned int i;
-	int rc;
 
 	if (!drm_enc || !params) {
 		DPU_ERROR("invalid args\n");
@@ -2048,7 +1987,6 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc,
 				phys->ops.prepare_for_kickoff(phys, params);
 			if (phys->enable_state == DPU_ENC_ERR_NEEDS_HW_RESET)
 				needs_hw_reset = true;
-			_dpu_encoder_setup_dither(phys);
 		}
 	}
 	DPU_ATRACE_END("enc_prepare_for_kickoff");
@@ -2064,14 +2002,6 @@ void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc,
 				phys->ops.hw_reset(phys);
 		}
 	}
-
-	if (dpu_enc->cur_master && dpu_enc->cur_master->connector) {
-		rc = dpu_connector_pre_kickoff(dpu_enc->cur_master->connector);
-		if (rc)
-			DPU_ERROR_ENC(dpu_enc, "kickoff conn%d failed rc %d\n",
-					dpu_enc->cur_master->connector->base.id,
-					rc);
-	}
 }
 
 void dpu_encoder_kickoff(struct drm_encoder *drm_enc)
@@ -2704,8 +2634,7 @@ static void dpu_encoder_frame_done_timeout(struct timer_list *t)
 		.early_unregister = dpu_encoder_early_unregister,
 };
 
-struct drm_encoder *dpu_encoder_init(
-		struct drm_device *dev,
+int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc,
 		struct msm_display_info *disp_info)
 {
 	struct msm_drm_private *priv = dev->dev_private;
@@ -2715,11 +2644,7 @@ struct drm_encoder *dpu_encoder_init(
 	int drm_enc_mode = DRM_MODE_ENCODER_NONE;
 	int ret = 0;
 
-	dpu_enc = kzalloc(sizeof(*dpu_enc), GFP_KERNEL);
-	if (!dpu_enc) {
-		ret = -ENOMEM;
-		goto fail;
-	}
+	dpu_enc = to_dpu_encoder_virt(enc);
 
 	mutex_init(&dpu_enc->enc_lock);
 	ret = dpu_encoder_setup_display(dpu_enc, dpu_kms, disp_info,
@@ -2729,16 +2654,12 @@ struct drm_encoder *dpu_encoder_init(
 
 	dpu_enc->cur_master = NULL;
 	spin_lock_init(&dpu_enc->enc_spinlock);
-	drm_enc = &dpu_enc->base;
-	drm_encoder_init(dev, drm_enc, &dpu_encoder_funcs, drm_enc_mode, NULL);
-	drm_encoder_helper_add(drm_enc, &dpu_encoder_helper_funcs);
 
 	atomic_set(&dpu_enc->frame_done_timeout, 0);
 	timer_setup(&dpu_enc->frame_done_timer,
 			dpu_encoder_frame_done_timeout, 0);
 
-	if ((disp_info->intf_type == DRM_MODE_CONNECTOR_DSI) &&
-			disp_info->is_primary)
+	if (disp_info->intf_type == DRM_MODE_CONNECTOR_DSI)
 		timer_setup(&dpu_enc->vsync_event_timer,
 				dpu_encoder_vsync_event_handler,
 				0);
@@ -2756,14 +2677,38 @@ struct drm_encoder *dpu_encoder_init(
 
 	DPU_DEBUG_ENC(dpu_enc, "created\n");
 
-	return drm_enc;
+	return ret;
 
 fail:
 	DPU_ERROR("failed to create encoder\n");
 	if (drm_enc)
 		dpu_encoder_destroy(drm_enc);
 
-	return ERR_PTR(ret);
+	return ret;
+
+
+}
+
+struct drm_encoder *dpu_encoder_init(struct drm_device *dev,
+		int drm_enc_mode)
+{
+	struct dpu_encoder_virt *dpu_enc = NULL;
+	int rc = 0;
+
+	dpu_enc = devm_kzalloc(dev->dev, sizeof(*dpu_enc), GFP_KERNEL);
+	if (!dpu_enc)
+		return ERR_PTR(ENOMEM);
+
+	rc = drm_encoder_init(dev, &dpu_enc->base, &dpu_encoder_funcs,
+			drm_enc_mode, NULL);
+	if (rc) {
+		devm_kfree(dev->dev, dpu_enc);
+		return ERR_PTR(rc);
+	}
+
+	drm_encoder_helper_add(&dpu_enc->base, &dpu_encoder_helper_funcs);
+
+	return &dpu_enc->base;
 }
 
 int dpu_encoder_wait_for_event(struct drm_encoder *drm_enc,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
index b25619d..d853ad9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
@@ -45,7 +45,6 @@ struct dpu_encoder_hw_resources {
 	enum dpu_intf_mode wbs[WB_MAX];
 	bool needs_cdm;
 	u32 display_num_of_h_tiles;
-	struct msm_display_topology topology;
 };
 
 /**
@@ -160,6 +159,15 @@ int dpu_encoder_wait_for_event(struct drm_encoder *drm_encoder,
  */
 struct drm_encoder *dpu_encoder_init(
 		struct drm_device *dev,
+		int drm_enc_mode);
+
+/**
+ * dpu_encoder_setup - setup dpu_encoder for the display probed
+ * @dev:		Pointer to drm device structure
+ * @enc:		Pointer to the drm_encoder
+ * @disp_info:	Pointer to the display info
+ */
+int dpu_encoder_setup(struct drm_device *dev, struct drm_encoder *enc,
 		struct msm_display_info *disp_info);
 
 /**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index 576c475..35beefa 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -25,7 +25,6 @@
 #include "dpu_hw_wb.h"
 #include "dpu_hw_cdm.h"
 #include "dpu_encoder.h"
-#include "dpu_connector.h"
 
 #define DPU_ENCODER_NAME_MAX	16
 
@@ -221,6 +220,7 @@ struct dpu_encoder_irq {
  * @split_role:		Role to play in a split-panel configuration
  * @intf_mode:		Interface mode
  * @intf_idx:		Interface index on dpu hardware
+ * @topology_name:	topology selected for the display
  * @enc_spinlock:	Virtual-Encoder-Wide Spin Lock for IRQ purposes
  * @enable_state:	Enable state tracking
  * @vblank_refcount:	Reference count of vblank request
@@ -250,6 +250,7 @@ struct dpu_encoder_phys {
 	enum dpu_enc_split_role split_role;
 	enum dpu_intf_mode intf_mode;
 	enum dpu_intf intf_idx;
+	enum dpu_rm_topology_name topology_name;
 	spinlock_t *enc_spinlock;
 	enum dpu_enc_enable_state enable_state;
 	atomic_t vblank_refcount;
@@ -443,14 +444,11 @@ int dpu_encoder_helper_wait_event_timeout(
 static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
 		struct dpu_encoder_phys *phys_enc)
 {
-	enum dpu_rm_topology_name topology;
-
 	if (!phys_enc || phys_enc->enable_state == DPU_ENC_DISABLING)
 		return BLEND_3D_NONE;
 
-	topology = dpu_connector_get_topology_name(phys_enc->connector);
 	if (phys_enc->split_role == ENC_ROLE_SOLO &&
-	    topology == DPU_RM_TOPOLOGY_DUALPIPE_3DMERGE)
+	    phys_enc->topology_name == DPU_RM_TOPOLOGY_DUALPIPE_3DMERGE)
 		return BLEND_3D_H_ROW_INT;
 
 	return BLEND_3D_NONE;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index b680718..73e5938 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -15,7 +15,6 @@
 #include "dpu_hw_interrupts.h"
 #include "dpu_core_irq.h"
 #include "dpu_formats.h"
-#include "dsi_display.h"
 #include "dpu_trace.h"
 
 #define DPU_DEBUG_VIDENC(e, fmt, ...) DPU_DEBUG("enc%d intf%d " fmt, \
@@ -356,13 +355,10 @@ static void dpu_encoder_phys_vid_underrun_irq(void *arg, int irq_idx)
 
 static bool _dpu_encoder_phys_is_dual_ctl(struct dpu_encoder_phys *phys_enc)
 {
-	enum dpu_rm_topology_name topology;
-
 	if (!phys_enc)
 		return false;
 
-	topology = dpu_connector_get_topology_name(phys_enc->connector);
-	if (topology == DPU_RM_TOPOLOGY_DUALPIPE)
+	if (phys_enc->topology_name == DPU_RM_TOPOLOGY_DUALPIPE)
 		return true;
 
 	return false;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 0fbeb75..37c7c66 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -27,18 +27,6 @@
 #include "msm_mmu.h"
 #include "msm_gem.h"
 
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-#include "dsi_display.h"
-#include "dsi_drm.h"
-#endif
-#ifdef CONFIG_DRM_MSM_WRITEBACK
-#include "dpu_wb.h"
-#endif
-#ifdef CONFIG_DRM_MSM_DISPLAYPORT
-#include "dp/dp_display.h"
-#include "dp_drm.h"
-#endif
-#include "dpu_connector.h"
 #include "dpu_kms.h"
 #include "dpu_core_irq.h"
 #include "dpu_formats.h"
@@ -473,9 +461,7 @@ static void dpu_kms_complete_commit(struct msm_kms *kms,
 	struct msm_drm_private *priv;
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *old_crtc_state;
-	struct drm_connector *conn;
-	struct drm_connector_state *old_conn_state;
-	int i, rc = 0;
+	int i;
 
 	if (!kms || !old_state)
 		return;
@@ -488,19 +474,6 @@ static void dpu_kms_complete_commit(struct msm_kms *kms,
 	for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i)
 		dpu_crtc_complete_commit(crtc, old_crtc_state);
 
-	for_each_old_connector_in_state(old_state, conn, old_conn_state, i) {
-		struct dpu_connector *c_conn;
-
-		c_conn = to_dpu_connector(conn);
-		if (!c_conn->ops.post_kickoff)
-			continue;
-		rc = c_conn->ops.post_kickoff(conn);
-		if (rc) {
-			pr_err("Connector Post kickoff failed rc=%d\n",
-					 rc);
-		}
-	}
-
 	dpu_power_resource_enable(&priv->phandle, dpu_kms->core_client, false);
 	pm_runtime_put_sync(dpu_kms->dev->dev);
 
@@ -553,317 +526,36 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
 	drm_crtc_vblank_put(crtc);
 }
 
-/**
- * _dpu_kms_get_displays - query for underlying display handles and cache them
- * @dpu_kms:    Pointer to dpu kms structure
- * Returns:     Zero on success
- */
-static int _dpu_kms_get_displays(struct dpu_kms *dpu_kms)
-{
-	int rc = -ENOMEM;
-
-	if (!dpu_kms) {
-		DPU_ERROR("invalid dpu kms\n");
-		return -EINVAL;
-	}
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-	/* dsi */
-	dpu_kms->dsi_displays = NULL;
-	dpu_kms->dsi_display_count = dsi_display_get_num_of_displays();
-	if (dpu_kms->dsi_display_count) {
-		dpu_kms->dsi_displays = kcalloc(dpu_kms->dsi_display_count,
-				sizeof(void *),
-				GFP_KERNEL);
-		if (!dpu_kms->dsi_displays) {
-			DPU_ERROR("failed to allocate dsi displays\n");
-			goto exit_deinit_dsi;
-		}
-		dpu_kms->dsi_display_count =
-			dsi_display_get_active_displays(dpu_kms->dsi_displays,
-					dpu_kms->dsi_display_count);
-	}
-#endif
-
-#ifdef CONFIG_DRM_MSM_WRITEBACK
-	/* wb */
-	dpu_kms->wb_displays = NULL;
-	dpu_kms->wb_display_count = dpu_wb_get_num_of_displays();
-	if (dpu_kms->wb_display_count) {
-		dpu_kms->wb_displays = kcalloc(dpu_kms->wb_display_count,
-				sizeof(void *),
-				GFP_KERNEL);
-		if (!dpu_kms->wb_displays) {
-			DPU_ERROR("failed to allocate wb displays\n");
-			goto exit_deinit_wb;
-		}
-		dpu_kms->wb_display_count =
-			wb_display_get_displays(dpu_kms->wb_displays,
-					dpu_kms->wb_display_count);
-	}
-#endif
-
-#ifdef CONFIG_DRM_MSM_DISPLAYPORT
-	/* dp */
-	dpu_kms->dp_displays = NULL;
-	dpu_kms->dp_display_count = dp_display_get_num_of_displays();
-	if (dpu_kms->dp_display_count) {
-		dpu_kms->dp_displays = kcalloc(dpu_kms->dp_display_count,
-				sizeof(void *), GFP_KERNEL);
-		if (!dpu_kms->dp_displays) {
-			DPU_ERROR("failed to allocate dp displays\n");
-			goto exit_deinit_dp;
-		}
-		dpu_kms->dp_display_count =
-			dp_display_get_displays(dpu_kms->dp_displays,
-					dpu_kms->dp_display_count);
-	}
-#endif
-
-	return 0;
-
-#ifdef CONFIG_DRM_MSM_DISPLAYPORT
-exit_deinit_dp:
-	kfree(dpu_kms->dp_displays);
-	dpu_kms->dp_display_count = 0;
-	dpu_kms->dp_displays = NULL;
-#endif
-#ifdef CONFIG_DRM_MSM_WRITEBACK
-exit_deinit_wb:
-	kfree(dpu_kms->wb_displays);
-	dpu_kms->wb_display_count = 0;
-	dpu_kms->wb_displays = NULL;
-#endif
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-exit_deinit_dsi:
-	kfree(dpu_kms->dsi_displays);
-	dpu_kms->dsi_display_count = 0;
-	dpu_kms->dsi_displays = NULL;
-	return rc;
-#else
-	return rc;
-#endif
-}
-
-/**
- * _dpu_kms_release_displays - release cache of underlying display handles
- * @dpu_kms:    Pointer to dpu kms structure
- */
-static void _dpu_kms_release_displays(struct dpu_kms *dpu_kms)
-{
-	if (!dpu_kms) {
-		DPU_ERROR("invalid dpu kms\n");
-		return;
-	}
-
-	kfree(dpu_kms->wb_displays);
-	dpu_kms->wb_displays = NULL;
-	dpu_kms->wb_display_count = 0;
-
-	kfree(dpu_kms->dsi_displays);
-	dpu_kms->dsi_displays = NULL;
-	dpu_kms->dsi_display_count = 0;
-}
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
 static void _dpu_kms_initialize_dsi(struct drm_device *dev,
 				    struct msm_drm_private *priv,
-				    struct dpu_kms *dpu_kms,
-				    unsigned max_encoders)
-{
-	static const struct dpu_connector_ops dsi_ops = {
-		.post_init =  dsi_conn_post_init,
-		.detect =     dsi_conn_detect,
-		.get_modes =  dsi_connector_get_modes,
-		.put_modes =  dsi_connector_put_modes,
-		.mode_valid = dsi_conn_mode_valid,
-		.get_info =   dsi_display_get_info,
-		.set_backlight = dsi_display_set_backlight,
-		.soft_reset   = dsi_display_soft_reset,
-		.pre_kickoff  = dsi_conn_pre_kickoff,
-		.clk_ctrl = dsi_display_clk_ctrl,
-		.set_power = dsi_display_set_power,
-		.get_mode_info = dsi_conn_get_mode_info,
-		.get_dst_format = dsi_display_get_dst_format,
-		.post_kickoff = dsi_conn_post_kickoff
-	};
-	struct msm_display_info info;
-	struct drm_encoder *encoder;
-	void *display, *connector;
-	int i, rc;
-
-	/* dsi */
-	for (i = 0; i < dpu_kms->dsi_display_count &&
-		priv->num_encoders < max_encoders; ++i) {
-		display = dpu_kms->dsi_displays[i];
-		encoder = NULL;
-
-		memset(&info, 0x0, sizeof(info));
-		rc = dsi_display_get_info(&info, display);
-		if (rc) {
-			DPU_ERROR("dsi get_info %d failed\n", i);
-			continue;
-		}
-
-		encoder = dpu_encoder_init(dev, &info);
-		if (IS_ERR_OR_NULL(encoder)) {
-			DPU_ERROR("encoder init failed for dsi %d\n", i);
-			continue;
-		}
-
-		rc = dsi_display_drm_bridge_init(display, encoder);
-		if (rc) {
-			DPU_ERROR("dsi bridge %d init failed, %d\n", i, rc);
-			dpu_encoder_destroy(encoder);
-			continue;
-		}
-
-		connector = dpu_connector_init(dev,
-					encoder,
-					0,
-					display,
-					&dsi_ops,
-					DRM_CONNECTOR_POLL_HPD,
-					DRM_MODE_CONNECTOR_DSI);
-		if (connector) {
-			priv->encoders[priv->num_encoders++] = encoder;
-		} else {
-			DPU_ERROR("dsi %d connector init failed\n", i);
-			dsi_display_drm_bridge_deinit(display);
-			dpu_encoder_destroy(encoder);
-		}
-	}
-}
-#endif
-
-#ifdef CONFIG_DRM_MSM_WRITEBACK
-static void _dpu_kms_initialize_wb(struct drm_device *dev,
-				   struct msm_drm_private *priv,
-				   struct dpu_kms *dpu_kms,
-				   unsigned max_encoders)
+				    struct dpu_kms *dpu_kms)
 {
-	static const struct dpu_connector_ops wb_ops = {
-		.post_init =    dpu_wb_connector_post_init,
-		.detect =       dpu_wb_connector_detect,
-		.get_modes =    dpu_wb_connector_get_modes,
-		.set_property = dpu_wb_connector_set_property,
-		.get_info =     dpu_wb_get_info,
-		.soft_reset =   NULL,
-		.get_mode_info = dpu_wb_get_mode_info,
-		.get_dst_format = NULL
-	};
-	struct msm_display_info info;
-	struct drm_encoder *encoder;
-	void *display, *connector;
+	struct drm_encoder *encoder = NULL;
 	int i, rc;
 
-	/* wb */
-	for (i = 0; i < dpu_kms->wb_display_count &&
-		priv->num_encoders < max_encoders; ++i) {
-		display = dpu_kms->wb_displays[i];
-		encoder = NULL;
-
-		memset(&info, 0x0, sizeof(info));
-		rc = dpu_wb_get_info(&info, display);
-		if (rc) {
-			DPU_ERROR("wb get_info %d failed\n", i);
-			continue;
-		}
-
-		encoder = dpu_encoder_init(dev, &info);
-		if (IS_ERR_OR_NULL(encoder)) {
-			DPU_ERROR("encoder init failed for wb %d\n", i);
-			continue;
-		}
-
-		rc = dpu_wb_drm_init(display, encoder);
-		if (rc) {
-			DPU_ERROR("wb bridge %d init failed, %d\n", i, rc);
-			dpu_encoder_destroy(encoder);
-			continue;
-		}
-
-		connector = dpu_connector_init(dev,
-				encoder,
-				0,
-				display,
-				&wb_ops,
-				DRM_CONNECTOR_POLL_HPD,
-				DRM_MODE_CONNECTOR_VIRTUAL);
-		if (connector) {
-			priv->encoders[priv->num_encoders++] = encoder;
-		} else {
-			DPU_ERROR("wb %d connector init failed\n", i);
-			dpu_wb_drm_deinit(display);
-			dpu_encoder_destroy(encoder);
-		}
+	/*TODO: Support two independent DSI connectors */
+	encoder = dpu_encoder_init(dev, DRM_MODE_CONNECTOR_DSI);
+	if (IS_ERR_OR_NULL(encoder)) {
+		DPU_ERROR("encoder init failed for dsi display\n");
+		return;
 	}
-}
-#endif
-
-#ifdef CONFIG_DRM_MSM_DISPLAYPORT
-static void _dpu_kms_initialize_dp(struct drm_device *dev,
-				   struct msm_drm_private *priv,
-				   struct dpu_kms *dpu_kms,
-				   unsigned max_encoders)
-{
-	static const struct dpu_connector_ops dp_ops = {
-		.post_init  = dp_connector_post_init,
-		.detect     = dp_connector_detect,
-		.get_modes  = dp_connector_get_modes,
-		.mode_valid = dp_connector_mode_valid,
-		.get_info   = dp_connector_get_info,
-		.get_mode_info  = dp_connector_get_mode_info,
-		.send_hpd_event = dp_connector_send_hpd_event,
-	};
-	struct msm_display_info info;
-	struct drm_encoder *encoder;
-	void *display, *connector;
-	int i, rc;
 
-	/* dp */
-	for (i = 0; i < dpu_kms->dp_display_count &&
-			priv->num_encoders < max_encoders; ++i) {
-		display = dpu_kms->dp_displays[i];
-		encoder = NULL;
+	priv->encoders[priv->num_encoders++] = encoder;
 
-		memset(&info, 0x0, sizeof(info));
-		rc = dp_connector_get_info(&info, display);
-		if (rc) {
-			DPU_ERROR("dp get_info %d failed\n", i);
-			continue;
+	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+		if (!priv->dsi[i]) {
+			DPU_DEBUG("invalid msm_dsi for ctrl %d\n", i);
+			return;
 		}
 
-		encoder = dpu_encoder_init(dev, &info);
-		if (IS_ERR_OR_NULL(encoder)) {
-			DPU_ERROR("dp encoder init failed %d\n", i);
-			continue;
-		}
-
-		rc = dp_drm_bridge_init(display, encoder);
+		rc = msm_dsi_modeset_init(priv->dsi[i], dev, encoder);
 		if (rc) {
-			DPU_ERROR("dp bridge %d init failed, %d\n", i, rc);
-			dpu_encoder_destroy(encoder);
+			DPU_ERROR("modeset_init failed for dsi[%d], rc = %d\n",
+				i, rc);
 			continue;
 		}
-
-		connector = dpu_connector_init(dev,
-					encoder,
-					NULL,
-					display,
-					&dp_ops,
-					DRM_CONNECTOR_POLL_HPD,
-					DRM_MODE_CONNECTOR_DisplayPort);
-		if (connector) {
-			priv->encoders[priv->num_encoders++] = encoder;
-		} else {
-			DPU_ERROR("dp %d connector init failed\n", i);
-			dp_drm_bridge_deinit(display);
-			dpu_encoder_destroy(encoder);
-		}
 	}
 }
-#endif
 
 /**
  * _dpu_kms_setup_displays - create encoders, bridges and connectors
@@ -877,26 +569,12 @@ static void _dpu_kms_setup_displays(struct drm_device *dev,
 				    struct msm_drm_private *priv,
 				    struct dpu_kms *dpu_kms)
 {
-	unsigned max_encoders;
-
-	max_encoders = dpu_kms->dsi_display_count + dpu_kms->wb_display_count +
-				dpu_kms->dp_display_count;
-	if (max_encoders > ARRAY_SIZE(priv->encoders)) {
-		max_encoders = ARRAY_SIZE(priv->encoders);
-		DPU_ERROR("capping number of displays to %d", max_encoders);
-	}
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-	_dpu_kms_initialize_dsi(dev, priv, dpu_kms, max_encoders);
-#endif
+	_dpu_kms_initialize_dsi(dev, priv, dpu_kms);
 
-#ifdef CONFIG_DRM_MSM_WRITEBACK
-	_dpu_kms_initialize_wb(dev, priv, dpu_kms, max_encoders);
-#endif
-
-#ifdef CONFIG_DRM_MSM_DISPLAYPORT
-	_dpu_kms_initialize_dp(dev, priv, dpu_kms, max_encoders);
-#endif
+	/**
+	 * Extend this function to initialize other
+	 * types of displays
+	 */
 }
 
 static void _dpu_kms_drm_obj_destroy(struct dpu_kms *dpu_kms)
@@ -931,8 +609,6 @@ static void _dpu_kms_drm_obj_destroy(struct dpu_kms *dpu_kms)
 	for (i = 0; i < priv->num_encoders; i++)
 		priv->encoders[i]->funcs->destroy(priv->encoders[i]);
 	priv->num_encoders = 0;
-
-	_dpu_kms_release_displays(dpu_kms);
 }
 
 static int _dpu_kms_drm_obj_init(struct dpu_kms *dpu_kms)
@@ -963,12 +639,12 @@ static int _dpu_kms_drm_obj_init(struct dpu_kms *dpu_kms)
 	ret = dpu_core_irq_domain_add(dpu_kms);
 	if (ret)
 		goto fail_irq;
+
 	/*
-	 * Query for underlying display drivers, and create connectors,
-	 * bridges and encoders for them.
+	 * Create encoder and query display drivers to create
+	 * bridges and connectors
 	 */
-	if (!_dpu_kms_get_displays(dpu_kms))
-		(void)_dpu_kms_setup_displays(dev, priv, dpu_kms);
+	_dpu_kms_setup_displays(dev, priv, dpu_kms);
 
 	max_crtc_count = min(catalog->mixer_count, priv->num_encoders);
 
@@ -1386,8 +1062,6 @@ static void _dpu_kms_hw_destroy(struct dpu_kms *dpu_kms,
 		dpu_power_handle_unregister_event(
 				&priv->phandle, dpu_kms->power_event);
 
-	_dpu_kms_release_displays(dpu_kms);
-
 	/* safe to call these more than once during shutdown */
 	_dpu_debugfs_destroy(dpu_kms);
 	_dpu_kms_mmu_destroy(dpu_kms);
@@ -1590,53 +1264,10 @@ static int dpu_kms_atomic_check(struct msm_kms *kms,
 		dpu_kms->aspace[domain] : NULL;
 }
 
-static void _dpu_kms_post_open(struct msm_kms *kms, struct drm_file *file)
-{
-	struct drm_device *dev = NULL;
-	struct dpu_kms *dpu_kms = NULL;
-	struct drm_connector *connector = NULL;
-	struct drm_connector_list_iter conn_iter;
-	struct dpu_connector *dpu_conn = NULL;
-
-	if (!kms) {
-		DPU_ERROR("invalid kms\n");
-		return;
-	}
-
-	dpu_kms = to_dpu_kms(kms);
-	dev = dpu_kms->dev;
-
-	if (!dev) {
-		DPU_ERROR("invalid device\n");
-		return;
-	}
-
-	if (!dev->mode_config.poll_enabled)
-		return;
-
-	mutex_lock(&dev->mode_config.mutex);
-	drm_connector_list_iter_begin(dev, &conn_iter);
-	drm_for_each_connector_iter(connector, &conn_iter) {
-		/* Only handle HPD capable connectors. */
-		if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
-			continue;
-
-		dpu_conn = to_dpu_connector(connector);
-
-		if (dpu_conn->ops.send_hpd_event)
-			dpu_conn->ops.send_hpd_event(dpu_conn->display);
-	}
-	drm_connector_list_iter_end(&conn_iter);
-	mutex_unlock(&dev->mode_config.mutex);
-
-}
-
 static int dpu_kms_pm_suspend(struct device *dev)
 {
 	struct drm_device *ddev;
 	struct drm_modeset_acquire_ctx ctx;
-	struct drm_connector *conn;
-	struct drm_connector_list_iter conn_iter;
 	struct drm_atomic_state *state;
 	struct dpu_kms *dpu_kms;
 	int ret = 0, num_crtcs = 0;
@@ -1680,45 +1311,6 @@ static int dpu_kms_pm_suspend(struct device *dev)
 	}
 
 	state->acquire_ctx = &ctx;
-	drm_connector_list_iter_begin(ddev, &conn_iter);
-	drm_for_each_connector_iter(conn, &conn_iter) {
-		struct drm_crtc_state *crtc_state;
-		uint64_t lp;
-
-		if (!conn->state || !conn->state->crtc ||
-				conn->dpms != DRM_MODE_DPMS_ON)
-			continue;
-
-		lp = dpu_connector_get_lp(conn);
-		if (lp == DPU_MODE_DPMS_LP1) {
-			/* transition LP1->LP2 on pm suspend */
-			ret = dpu_connector_set_property_for_commit(conn, state,
-					CONNECTOR_PROP_LP, DPU_MODE_DPMS_LP2);
-			if (ret) {
-				DRM_ERROR("failed to set lp2 for conn %d\n",
-						conn->base.id);
-				drm_atomic_state_put(state);
-				goto unlock;
-			}
-		}
-
-		if (lp != DPU_MODE_DPMS_LP2) {
-			/* force CRTC to be inactive */
-			crtc_state = drm_atomic_get_crtc_state(state,
-					conn->state->crtc);
-			if (IS_ERR_OR_NULL(crtc_state)) {
-				DRM_ERROR("failed to get crtc %d state\n",
-						conn->state->crtc->base.id);
-				drm_atomic_state_put(state);
-				goto unlock;
-			}
-
-			if (lp != DPU_MODE_DPMS_LP1)
-				crtc_state->active = false;
-			++num_crtcs;
-		}
-	}
-	drm_connector_list_iter_end(&conn_iter);
 
 	/* check for nothing to do */
 	if (num_crtcs == 0) {
@@ -1790,6 +1382,34 @@ static int dpu_kms_pm_resume(struct device *dev)
 	return 0;
 }
 
+void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
+				 struct drm_encoder *encoder,
+				 bool cmd_mode)
+{
+	struct msm_display_info info;
+	struct msm_drm_private *priv = encoder->dev->dev_private;
+	int i, rc = 0;
+
+	memset(&info, 0, sizeof(info));
+
+	info.intf_type = encoder->encoder_type;
+	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
+			MSM_DISPLAY_CAP_VID_MODE;
+
+	/* TODO: No support for DSI swap */
+	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
+		if (priv->dsi[i]) {
+			info.h_tile_instance[info.num_of_h_tiles] = i;
+			info.num_of_h_tiles++;
+		}
+	}
+
+	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
+	if (rc)
+		DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
+			encoder->base.id, rc);
+}
+
 static const struct msm_kms_funcs kms_funcs = {
 	.hw_init         = dpu_kms_hw_init,
 	.postinit        = dpu_kms_postinit,
@@ -1813,7 +1433,7 @@ static int dpu_kms_pm_resume(struct device *dev)
 	.pm_resume       = dpu_kms_pm_resume,
 	.destroy         = dpu_kms_destroy,
 	.get_address_space = _dpu_kms_get_address_space,
-	.postopen = _dpu_kms_post_open,
+	.set_encoder_mode = _dpu_kms_set_encoder_mode,
 };
 
 /* the caller api needs to turn on clock before calling it */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
index 3711daf8..5b0c081 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
@@ -200,12 +200,6 @@ struct dpu_kms {
 
 	struct dpu_hw_vbif *hw_vbif[VBIF_MAX];
 	struct dpu_hw_mdp *hw_mdp;
-	int dsi_display_count;
-	void **dsi_displays;
-	int wb_display_count;
-	void **wb_displays;
-	int dp_display_count;
-	void **dp_displays;
 
 	bool has_danger_ctrl;
 };
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index c8c12d3..dc740ca 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -23,7 +23,6 @@
 #include "dpu_hw_intf.h"
 #include "dpu_hw_wb.h"
 #include "dpu_encoder.h"
-#include "dpu_connector.h"
 
 #define RESERVED_BY_OTHER(h, r) \
 	((h)->rsvp && ((h)->rsvp->enc_id != (r)->enc_id))
@@ -158,6 +157,18 @@ struct dpu_hw_mdp *dpu_rm_get_mdp(struct dpu_rm *rm)
 	return rm->hw_mdp;
 }
 
+enum dpu_rm_topology_name
+dpu_rm_get_topology_name(struct msm_display_topology topology)
+{
+	int i;
+
+	for (i = 0; i < DPU_RM_TOPOLOGY_MAX; i++)
+		if (RM_IS_TOPOLOGY_MATCH(g_top_table[i], topology))
+			return g_top_table[i].top_name;
+
+	return DPU_RM_TOPOLOGY_NONE;
+}
+
 void dpu_rm_init_hw_iter(
 		struct dpu_rm_hw_iter *iter,
 		uint32_t enc_id,
@@ -954,20 +965,19 @@ static int _dpu_rm_populate_requirements(
 		struct drm_encoder *enc,
 		struct drm_crtc_state *crtc_state,
 		struct drm_connector_state *conn_state,
-		struct dpu_rm_requirements *reqs)
+		struct dpu_rm_requirements *reqs,
+		struct msm_display_topology req_topology)
 {
 	const struct drm_display_mode *mode = &crtc_state->mode;
 	int i;
 
 	memset(reqs, 0, sizeof(*reqs));
 
-	reqs->top_ctrl = dpu_connector_get_property(conn_state,
-			CONNECTOR_PROP_TOPOLOGY_CONTROL);
 	dpu_encoder_get_hw_resources(enc, &reqs->hw_res, conn_state);
 
 	for (i = 0; i < DPU_RM_TOPOLOGY_MAX; i++) {
 		if (RM_IS_TOPOLOGY_MATCH(g_top_table[i],
-					reqs->hw_res.topology)) {
+					req_topology)) {
 			reqs->topology = &g_top_table[i];
 			break;
 		}
@@ -978,10 +988,6 @@ static int _dpu_rm_populate_requirements(
 		return -EINVAL;
 	}
 
-	/* DSC blocks are hardwired for control path 0 and 1 */
-	if (reqs->topology->num_comp_enc)
-		reqs->top_ctrl |= BIT(DPU_RM_TOPCTL_DSPP);
-
 	/**
 	 * Set the requirement based on caps if not set from user space
 	 * This will ensure to select LM tied with DS blocks
@@ -1089,7 +1095,6 @@ void dpu_rm_release(struct dpu_rm *rm, struct drm_encoder *enc)
 {
 	struct dpu_rm_rsvp *rsvp;
 	struct drm_connector *conn;
-	uint64_t top_ctrl;
 
 	if (!rm || !enc) {
 		DPU_ERROR("invalid params\n");
@@ -1110,24 +1115,7 @@ void dpu_rm_release(struct dpu_rm *rm, struct drm_encoder *enc)
 		goto end;
 	}
 
-	top_ctrl = dpu_connector_get_property(conn->state,
-			CONNECTOR_PROP_TOPOLOGY_CONTROL);
-
-	if (top_ctrl & BIT(DPU_RM_TOPCTL_RESERVE_LOCK)) {
-		DPU_DEBUG("rsvp[s%de%d] not releasing locked resources\n",
-				rsvp->seq, rsvp->enc_id);
-	} else {
-		DPU_DEBUG("release rsvp[s%de%d]\n", rsvp->seq,
-				rsvp->enc_id);
-		_dpu_rm_release_rsvp(rm, rsvp, conn);
-
-		(void) msm_property_set_property(
-				dpu_connector_get_propinfo(conn),
-				dpu_connector_get_property_state(conn->state),
-				CONNECTOR_PROP_TOPOLOGY_NAME,
-				DPU_RM_TOPOLOGY_NONE);
-	}
-
+	_dpu_rm_release_rsvp(rm, rsvp, conn);
 end:
 	mutex_unlock(&rm->rm_lock);
 }
@@ -1141,18 +1129,6 @@ static int _dpu_rm_commit_rsvp(
 	enum dpu_hw_blk_type type;
 	int ret = 0;
 
-	ret = msm_property_set_property(
-			dpu_connector_get_propinfo(conn_state->connector),
-			dpu_connector_get_property_state(conn_state),
-			CONNECTOR_PROP_TOPOLOGY_NAME,
-			rsvp->topology);
-	if (ret) {
-		DPU_ERROR("failed to set topology name property, ret %d\n",
-				ret);
-		_dpu_rm_release_rsvp(rm, rsvp, conn_state->connector);
-		return ret;
-	}
-
 	/* Swap next rsvp to be the active */
 	for (type = 0; type < DPU_HW_BLK_MAX; type++) {
 		list_for_each_entry(blk, &rm->hw_blks[type], list) {
@@ -1177,6 +1153,7 @@ int dpu_rm_reserve(
 		struct drm_encoder *enc,
 		struct drm_crtc_state *crtc_state,
 		struct drm_connector_state *conn_state,
+		struct msm_display_topology topology,
 		bool test_only)
 {
 	struct dpu_rm_rsvp *rsvp_cur, *rsvp_nxt;
@@ -1202,7 +1179,7 @@ int dpu_rm_reserve(
 	_dpu_rm_print_rsvps(rm, DPU_RM_STAGE_BEGIN);
 
 	ret = _dpu_rm_populate_requirements(rm, enc, crtc_state,
-			conn_state, &reqs);
+			conn_state, &reqs, topology);
 	if (ret) {
 		DPU_ERROR("failed to populate hw requirements\n");
 		goto end;
@@ -1237,12 +1214,6 @@ int dpu_rm_reserve(
 		_dpu_rm_release_rsvp(rm, rsvp_cur, conn_state->connector);
 		rsvp_cur = NULL;
 		_dpu_rm_print_rsvps(rm, DPU_RM_STAGE_AFTER_CLEAR);
-		(void) msm_property_set_property(
-				dpu_connector_get_propinfo(
-						conn_state->connector),
-				dpu_connector_get_property_state(conn_state),
-				CONNECTOR_PROP_TOPOLOGY_NAME,
-				DPU_RM_TOPOLOGY_NONE);
 	}
 
 	/* Check the proposed reservation, store it in hw's "next" field */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
index 8a6cbcf..4c77874 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
@@ -128,6 +128,7 @@ int dpu_rm_init(struct dpu_rm *rm,
  * @drm_enc: DRM Encoder handle
  * @crtc_state: Proposed Atomic DRM CRTC State handle
  * @conn_state: Proposed Atomic DRM Connector State handle
+ * @topology: Pointer to topology info for the display
  * @test_only: Atomic-Test phase, discard results (unless property overrides)
  * @Return: 0 on Success otherwise -ERROR
  */
@@ -135,6 +136,7 @@ int dpu_rm_reserve(struct dpu_rm *rm,
 		struct drm_encoder *drm_enc,
 		struct drm_crtc_state *crtc_state,
 		struct drm_connector_state *conn_state,
+		struct msm_display_topology topology,
 		bool test_only);
 
 /**
@@ -187,4 +189,13 @@ void dpu_rm_init_hw_iter(
  */
 int dpu_rm_check_property_topctl(uint64_t val);
 
+/**
+ * dpu_rm_get_topology_name - returns the name of the the given topology
+ *                            definition
+ * @topology: topology definition
+ * @Return: name of the topology
+ */
+enum dpu_rm_topology_name
+dpu_rm_get_topology_name(struct msm_display_topology topology);
+
 #endif /* __DPU_RM_H__ */
diff --git a/drivers/gpu/drm/msm/dpu_dbg.c b/drivers/gpu/drm/msm/dpu_dbg.c
index 54ea631..4a39b82 100644
--- a/drivers/gpu/drm/msm/dpu_dbg.c
+++ b/drivers/gpu/drm/msm/dpu_dbg.c
@@ -2547,9 +2547,6 @@ static void _dpu_dump_array(struct dpu_dbg_reg_base *blk_arr[],
 	if (dump_dbgbus_vbif_rt)
 		_dpu_dbg_dump_vbif_dbg_bus(&dpu_dbg_base.dbgbus_vbif_rt);
 
-	if (dpu_dbg_base.dsi_dbg_bus || dump_all)
-		dsi_ctrl_debug_dump();
-
 	if (do_panic && dpu_dbg_base.panic_on_err)
 		panic(name);
 }
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index a6fe3a1..ebc40a9 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -47,12 +47,6 @@
 #include "msm_fence.h"
 #include "msm_gpu.h"
 #include "msm_kms.h"
-#ifdef CONFIG_DRM_MSM_WRITEBACK
-#include "dpu_wb.h"
-#endif
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-#include "dsi_display.h"
-#endif
 #ifdef CONFIG_DRM_MSM_DPU
 #include "dpu_dbg.h"
 #endif
@@ -1297,9 +1291,6 @@ int msm_ioctl_rmfb2(struct drm_device *dev, void *data,
 	DRM_IOCTL_DEF_DRV(MSM_GEM_MADVISE,  msm_ioctl_gem_madvise,  DRM_AUTH|DRM_RENDER_ALLOW),
 	DRM_IOCTL_DEF_DRV(MSM_SUBMITQUEUE_NEW,   msm_ioctl_submitqueue_new,   DRM_AUTH|DRM_RENDER_ALLOW),
 	DRM_IOCTL_DEF_DRV(MSM_SUBMITQUEUE_CLOSE, msm_ioctl_submitqueue_close, DRM_AUTH|DRM_RENDER_ALLOW),
-#ifdef CONFIG_DRM_MSM_WRITEBACK
-	DRM_IOCTL_DEF_DRV(DPU_WB_CONFIG, dpu_wb_config, DRM_UNLOCKED|DRM_AUTH),
-#endif
 	DRM_IOCTL_DEF_DRV(MSM_RMFB2, msm_ioctl_rmfb2,
 			  DRM_CONTROL_ALLOW|DRM_UNLOCKED),
 };
@@ -1541,42 +1532,6 @@ static int add_display_components(struct device *dev,
 	struct device *mdp_dev = NULL;
 	int ret;
 
-#ifdef CONFIG_DRM_MSM_DPU
-	struct device_node *node;
-	const char *name;
-
-	if (of_device_is_compatible(dev->of_node, "qcom,dpu-kms")) {
-		struct device_node *np = dev->of_node;
-		unsigned int i;
-		bool found = false;
-
-#ifdef CONFIG_DRM_MSM_DSI_STAGING
-		for (i = 0; i < MAX_DSI_ACTIVE_DISPLAY; i++) {
-			node = dsi_display_get_boot_display(i);
-
-			if (node != NULL) {
-				name = of_get_property(node, "label", NULL);
-				component_match_add(dev, matchptr, compare_of,
-						node);
-				pr_debug("Added component = %s\n", name);
-				found = true;
-			}
-		}
-		if (!found)
-			return -EPROBE_DEFER;
-#endif
-
-		for (i = 0; ; i++) {
-			node = of_parse_phandle(np, "connectors", i);
-			if (!node)
-				break;
-
-			component_match_add(dev, matchptr, compare_of, node);
-		}
-		return 0;
-	}
-#endif
-
 	/*
 	 * MDP5 based devices don't have a flat hierarchy. There is a top level
 	 * parent: MDSS, and children: MDP5, DSI, HDMI, eDP etc. Populate the
@@ -1600,7 +1555,7 @@ static int add_display_components(struct device *dev,
 		put_device(mdp_dev);
 
 		/* add the MDP component itself */
-		component_match_add(dev, matchptr, compare_of,
+		drm_of_component_match_add(dev, matchptr, compare_of,
 				   mdp_dev->of_node);
 	} else {
 		/* MDP4 */
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index eaf2b6a..90a2521 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -159,8 +159,6 @@ enum msm_mdp_conn_property {
 	CONNECTOR_PROP_AD_BL_SCALE,
 
 	/* enum/bitmask properties */
-	CONNECTOR_PROP_TOPOLOGY_NAME,
-	CONNECTOR_PROP_TOPOLOGY_CONTROL,
 	CONNECTOR_PROP_AUTOREFRESH,
 	CONNECTOR_PROP_LP,
 
@@ -331,57 +329,20 @@ struct msm_display_topology {
 };
 
 /**
- * struct msm_mode_info - defines all msm custom mode info
- * @frame_rate:      frame_rate of the mode
- * @vtotal:          vtotal calculated for the mode
- * @prefill_lines:   prefill lines based on porches.
- * @jitter_numer:	display panel jitter numerator configuration
- * @jitter_denom:	display panel jitter denominator configuration
- * @topology:        supported topology for the mode
- */
-struct msm_mode_info {
-	uint32_t frame_rate;
-	uint32_t vtotal;
-	uint32_t prefill_lines;
-	uint32_t jitter_numer;
-	uint32_t jitter_denom;
-	struct msm_display_topology topology;
-};
-
-/**
  * struct msm_display_info - defines display properties
  * @intf_type:          DRM_MODE_CONNECTOR_ display type
  * @capabilities:       Bitmask of display flags
  * @num_of_h_tiles:     Number of horizontal tiles in case of split interface
  * @h_tile_instance:    Controller instance used per tile. Number of elements is
  *                      based on num_of_h_tiles
- * @is_connected:       Set to true if display is connected
- * @width_mm:           Physical width
- * @height_mm:          Physical height
- * @max_width:          Max width of display. In case of hot pluggable display
- *                      this is max width supported by controller
- * @max_height:         Max height of display. In case of hot pluggable display
- *                      this is max height supported by controller
- * @is_primary:         Set to true if display is primary display
  * @is_te_using_watchdog_timer:  Boolean to indicate watchdog TE is
  *				 used instead of panel TE in cmd mode panels
  */
 struct msm_display_info {
 	int intf_type;
 	uint32_t capabilities;
-
 	uint32_t num_of_h_tiles;
 	uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY];
-
-	bool is_connected;
-
-	unsigned int width_mm;
-	unsigned int height_mm;
-
-	uint32_t max_width;
-	uint32_t max_height;
-
-	bool is_primary;
 	bool is_te_using_watchdog_timer;
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project



More information about the Freedreno mailing list