[Freedreno] [DPU PATCH 4/7] drm/msm/dpu: switch to drm zpos property

[Sean Paul]

On Wed, May 23, 2018 at 12:30:59PM -0700, Jeykumar Sankaran wrote:
> Replace custom plane zpos property with drm core zpos
> property. CRTC relies on the normalized zpos values
> to configure blend stages of each plane.
> 
> Signed-off-by: Jeykumar Sankaran <jsanka at codeaurora.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  | 36 +------------------------------
>  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 18 +++++++++++++---
>  2 files changed, 16 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index d439a9e..a0b702f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -2631,24 +2631,6 @@ struct plane_state {
>  	u32 pipe_id;
>  };
>  
> -static int pstate_cmp(const void *a, const void *b)
> -{
> -	struct plane_state *pa = (struct plane_state *)a;
> -	struct plane_state *pb = (struct plane_state *)b;
> -	int rc = 0;
> -	int pa_zpos, pb_zpos;
> -
> -	pa_zpos = dpu_plane_get_property(pa->dpu_pstate, PLANE_PROP_ZPOS);
> -	pb_zpos = dpu_plane_get_property(pb->dpu_pstate, PLANE_PROP_ZPOS);
> -
> -	if (pa_zpos != pb_zpos)
> -		rc = pa_zpos - pb_zpos;
> -	else
> -		rc = pa->drm_pstate->crtc_x - pb->drm_pstate->crtc_x;
> -
> -	return rc;
> -}
> -
>  static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
>  		struct drm_crtc_state *state)
>  {
> @@ -2714,8 +2696,7 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
>  
>  		pstates[cnt].dpu_pstate = to_dpu_plane_state(pstate);
>  		pstates[cnt].drm_pstate = pstate;
> -		pstates[cnt].stage = dpu_plane_get_property(
> -				pstates[cnt].dpu_pstate, PLANE_PROP_ZPOS);
> +		pstates[cnt].stage = pstate->normalized_zpos;
>  		pstates[cnt].pipe_id = dpu_plane_pipe(plane);
>  
>  		/* check dim layer stage with every plane */
> @@ -2771,21 +2752,6 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
>  		}
>  	}
>  
> -	/* assign mixer stages based on sorted zpos property */
> -	sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL);
> -
> -	if (!dpu_is_custom_client()) {
> -		int stage_old = pstates[0].stage;
> -
> -		z_pos = 0;
> -		for (i = 0; i < cnt; i++) {
> -			if (stage_old != pstates[i].stage)
> -				++z_pos;
> -			stage_old = pstates[i].stage;
> -			pstates[i].stage = z_pos;
> -		}
> -	}
> -
>  	z_pos = -1;
>  	for (i = 0; i < cnt; i++) {
>  		/* reset counts at every new blend stage */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index b033653..28735c8 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -59,6 +59,7 @@
>  #define DPU_NAME_SIZE  12
>  
>  #define DPU_PLANE_COLOR_FILL_FLAG	BIT(31)
> +#define DPU_ZPOS_MAX 255
>  
>  /* multirect rect index */
>  enum {
> @@ -1518,9 +1519,6 @@ static void _dpu_plane_install_properties(struct drm_plane *plane,
>  		/* reserve zpos == 0 for primary planes */
>  		zpos_def = drm_plane_index(plane) + 1;
>  	}
> -
> -	msm_property_install_range(&pdpu->property_info, "zpos",
> -		0x0, 0, zpos_max, zpos_def, PLANE_PROP_ZPOS);
>  }
>  
>  static int dpu_plane_atomic_set_property(struct drm_plane *plane,
> @@ -1958,6 +1956,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
>  	struct msm_drm_private *priv;
>  	struct dpu_kms *kms;
>  	enum drm_plane_type type;
> +	int zpos_max = DPU_ZPOS_MAX;
>  	int ret = -EINVAL;
>  
>  	if (!dev) {
> @@ -2049,6 +2048,19 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
>  	if (ret)
>  		goto clean_sspp;
>  
> +	pdpu->catalog = kms->catalog;
> +

Why is this here? It seems unrelated to the patch.

> +	if (kms->catalog->mixer_count &&
> +		kms->catalog->mixer[0].sblk->maxblendstages) {
> +		zpos_max = kms->catalog->mixer[0].sblk->maxblendstages - 1;
> +		if (zpos_max > DPU_STAGE_MAX - DPU_STAGE_0 - 1)
> +			zpos_max = DPU_STAGE_MAX - DPU_STAGE_0 - 1;
> +	}
> +
> +	ret = drm_plane_create_zpos_property(plane, 0, 0, zpos_max);
> +	if (ret)
> +		DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
> +
>  	/* success! finalize initialization */
>  	drm_plane_helper_add(plane, &dpu_plane_helper_funcs);
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS