[Freedreno] [DPU PATCH v2 07/12] drm/msm/dpu: remove clock management code from dpu_power_handle
Rajesh Yadav
ryadav at codeaurora.org
Fri May 11 14:49:33 UTC 2018
MDSS and dpu drivers manage their respective clocks via
runtime_pm. Remove custom clock management code from
dpu_power_handle.
Also dpu core clock management code is restricted to
dpu_core_perf module.
Changes in v2:
- remove local variable to hold and return error code
in _dpu_core_perf_set_core_clk_rate() instead return
retcode directly from msm_dss_clk_set_rate() call (Sean Paul)
- dpu_core_perf_init() is called from dpu_kms_hw_init() and
most of the params passed are already validated so remove
redundant checks from dpu_core_perf_init() (Sean Paul)
- return &mp->clk_config[i] directly to avoid local variable
in _dpu_kms_get_clk() (Sean Paul)
- invert conditional check to eliminate local rate variable
from dpu_kms_get_clk_rate() (Sean Paul)
- remove end label from dpu_power_resource_init() and return
directly on dpu_power_parse_dt_supply() failure as no cleanup
is needed (Sean Paul)
- remove checks for vtotal and vrefresh from
dpu_encoder_phys_cmd_tearcheck_config() as they should be
valid in mode_set call (Sean Paul)
Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 41 ++---
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 8 +-
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 9 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 28 ++-
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 9 +
drivers/gpu/drm/msm/dpu_power_handle.c | 196 +--------------------
drivers/gpu/drm/msm/dpu_power_handle.h | 40 -----
7 files changed, 63 insertions(+), 268 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 981f77f..5b79077 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -365,6 +365,17 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
}
}
+static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
+{
+ struct dss_clk *core_clk = kms->perf.core_clk;
+
+ if (core_clk->max_rate && (rate > core_clk->max_rate))
+ rate = core_clk->max_rate;
+
+ core_clk->rate = rate;
+ return msm_dss_clk_set_rate(core_clk, 1);
+}
+
static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
{
u64 clk_rate = kms->perf.perf_tune.min_core_clk;
@@ -376,7 +387,8 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
dpu_cstate = to_dpu_crtc_state(crtc->state);
clk_rate = max(dpu_cstate->new_perf.core_clk_rate,
clk_rate);
- clk_rate = clk_round_rate(kms->perf.core_clk, clk_rate);
+ clk_rate = clk_round_rate(kms->perf.core_clk->clk,
+ clk_rate);
}
}
@@ -484,15 +496,11 @@ void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
DPU_EVT32(kms->dev, stop_req, clk_rate);
- /* Temp change to avoid crash in clk_set_rate API. */
-#ifdef QCOM_DPU_SET_CLK
- if (dpu_power_clk_set_rate(&priv->phandle,
- kms->perf.clk_name, clk_rate)) {
+ if (_dpu_core_perf_set_core_clk_rate(kms, clk_rate)) {
DPU_ERROR("failed to set %s clock rate %llu\n",
- kms->perf.clk_name, clk_rate);
+ kms->perf.core_clk->clk_name, clk_rate);
return;
}
-#endif
kms->perf.core_clk_rate = clk_rate;
DPU_DEBUG("update clk rate = %lld HZ\n", clk_rate);
@@ -656,7 +664,6 @@ void dpu_core_perf_destroy(struct dpu_core_perf *perf)
dpu_core_perf_debugfs_destroy(perf);
perf->max_core_clk_rate = 0;
perf->core_clk = NULL;
- perf->clk_name = NULL;
perf->phandle = NULL;
perf->catalog = NULL;
perf->dev = NULL;
@@ -667,9 +674,9 @@ int dpu_core_perf_init(struct dpu_core_perf *perf,
struct dpu_mdss_cfg *catalog,
struct dpu_power_handle *phandle,
struct dpu_power_client *pclient,
- char *clk_name)
+ struct dss_clk *core_clk)
{
- if (!perf || !dev || !catalog || !phandle || !pclient || !clk_name) {
+ if (!pclient) {
DPU_ERROR("invalid parameters\n");
return -EINVAL;
}
@@ -678,23 +685,13 @@ int dpu_core_perf_init(struct dpu_core_perf *perf,
perf->catalog = catalog;
perf->phandle = phandle;
perf->pclient = pclient;
- perf->clk_name = clk_name;
-
- perf->core_clk = dpu_power_clk_get_clk(phandle, clk_name);
- if (!perf->core_clk) {
- DPU_ERROR("invalid core clk\n");
- goto err;
- }
+ perf->core_clk = core_clk;
- perf->max_core_clk_rate = dpu_power_clk_get_max_rate(phandle, clk_name);
+ perf->max_core_clk_rate = core_clk->max_rate;
if (!perf->max_core_clk_rate) {
DPU_DEBUG("optional max core clk rate, use default\n");
perf->max_core_clk_rate = DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE;
}
return 0;
-
-err:
- dpu_core_perf_destroy(perf);
- return -ENODEV;
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 1965ff5..9c1a719 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -54,7 +54,6 @@ struct dpu_core_perf_tune {
* @catalog: Pointer to catalog configuration
* @phandle: Pointer to power handler
* @pclient: Pointer to power client
- * @clk_name: core clock name
* @core_clk: Pointer to core clock structure
* @core_clk_rate: current core clock rate
* @max_core_clk_rate: maximum allowable core clock rate
@@ -70,8 +69,7 @@ struct dpu_core_perf {
struct dpu_mdss_cfg *catalog;
struct dpu_power_handle *phandle;
struct dpu_power_client *pclient;
- char *clk_name;
- struct clk *core_clk;
+ struct dss_clk *core_clk;
u64 core_clk_rate;
u64 max_core_clk_rate;
struct dpu_core_perf_tune perf_tune;
@@ -118,14 +116,14 @@ void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
* @catalog: Pointer to catalog
* @phandle: Pointer to power handle
* @pclient: Pointer to power client
- * @clk_name: core clock name
+ * @core_clk: pointer to core clock
*/
int dpu_core_perf_init(struct dpu_core_perf *perf,
struct drm_device *dev,
struct dpu_mdss_cfg *catalog,
struct dpu_power_handle *phandle,
struct dpu_power_client *pclient,
- char *clk_name);
+ struct dss_clk *core_clk);
/**
* dpu_core_perf_debugfs_init - initialize debugfs for core performance context
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 072939c..388de38 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -428,11 +428,10 @@ static void dpu_encoder_phys_cmd_tearcheck_config(
* vsync_count is ratio of MDP VSYNC clock frequency to LCD panel
* frequency divided by the no. of rows (lines) in the LCDpanel.
*/
- vsync_hz = dpu_power_clk_get_rate(&priv->phandle, "vsync_clk");
- if (!vsync_hz || !mode->vtotal || !mode->vrefresh) {
- DPU_DEBUG_CMDENC(cmd_enc,
- "invalid params - vsync_hz %u vtot %u vrefresh %u\n",
- vsync_hz, mode->vtotal, mode->vrefresh);
+ vsync_hz = dpu_kms_get_clk_rate(dpu_kms, "vsync_clk");
+ if (vsync_hz <= 0) {
+ DPU_DEBUG_CMDENC(cmd_enc, "invalid - vsync_hz %u\n",
+ vsync_hz);
return;
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index cda4d12..349bda5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1499,6 +1499,31 @@ static int _dpu_kms_mmu_init(struct dpu_kms *dpu_kms)
return ret;
}
+static struct dss_clk *_dpu_kms_get_clk(struct dpu_kms *dpu_kms,
+ char *clock_name)
+{
+ struct dss_module_power *mp = &dpu_kms->mp;
+ int i;
+
+ for (i = 0; i < mp->num_clk; i++) {
+ if (!strcmp(mp->clk_config[i].clk_name, clock_name))
+ return &mp->clk_config[i];
+ }
+
+ return NULL;
+}
+
+u64 dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name)
+{
+ struct dss_clk *clk;
+
+ clk = _dpu_kms_get_clk(dpu_kms, clock_name);
+ if (!clk)
+ return -EINVAL;
+
+ return clk_get_rate(clk->clk);
+}
+
static void dpu_kms_handle_power_event(u32 event_type, void *usr)
{
struct dpu_kms *dpu_kms = usr;
@@ -1696,7 +1721,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
#endif
rc = dpu_core_perf_init(&dpu_kms->perf, dev, dpu_kms->catalog,
- &priv->phandle, priv->pclient, "core_clk");
+ &priv->phandle, priv->pclient,
+ _dpu_kms_get_clk(dpu_kms, "core_clk"));
if (rc) {
DPU_ERROR("failed to init perf %d\n", rc);
goto perf_err;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
index 3c69921..a8255fe 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h
@@ -537,4 +537,13 @@ struct dpu_kms_fbo *dpu_kms_fbo_alloc(struct drm_device *dev,
void dpu_kms_encoder_enable(struct drm_encoder *encoder);
+/**
+ * dpu_kms_get_clk_rate() - get the clock rate
+ * @dpu_kms: poiner to dpu_kms structure
+ * @clock_name: clock name to get the rate
+ *
+ * Return: current clock rate
+ */
+u64 dpu_kms_get_clk_rate(struct dpu_kms *dpu_kms, char *clock_name);
+
#endif /* __dpu_kms_H__ */
diff --git a/drivers/gpu/drm/msm/dpu_power_handle.c b/drivers/gpu/drm/msm/dpu_power_handle.c
index e9e344a..12602ae 100644
--- a/drivers/gpu/drm/msm/dpu_power_handle.c
+++ b/drivers/gpu/drm/msm/dpu_power_handle.c
@@ -13,7 +13,6 @@
#define pr_fmt(fmt) "[drm:%s:%d]: " fmt, __func__, __LINE__
-#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/string.h>
@@ -246,62 +245,6 @@ static int dpu_power_parse_dt_supply(struct platform_device *pdev,
return rc;
}
-static int dpu_power_parse_dt_clock(struct platform_device *pdev,
- struct dss_module_power *mp)
-{
- u32 i = 0, rc = 0;
- const char *clock_name;
- u32 clock_rate = 0;
- u32 clock_max_rate = 0;
- int num_clk = 0;
-
- if (!pdev || !mp) {
- pr_err("invalid input param pdev:%pK mp:%pK\n", pdev, mp);
- return -EINVAL;
- }
-
- mp->num_clk = 0;
- num_clk = of_property_count_strings(pdev->dev.of_node,
- "clock-names");
- if (num_clk <= 0) {
- pr_debug("clocks are not defined\n");
- goto clk_err;
- }
-
- mp->num_clk = num_clk;
- mp->clk_config = devm_kzalloc(&pdev->dev,
- sizeof(struct dss_clk) * num_clk, GFP_KERNEL);
- if (!mp->clk_config) {
- rc = -ENOMEM;
- mp->num_clk = 0;
- goto clk_err;
- }
-
- for (i = 0; i < num_clk; i++) {
- of_property_read_string_index(pdev->dev.of_node, "clock-names",
- i, &clock_name);
- strlcpy(mp->clk_config[i].clk_name, clock_name,
- sizeof(mp->clk_config[i].clk_name));
-
- of_property_read_u32_index(pdev->dev.of_node, "clock-rate",
- i, &clock_rate);
- mp->clk_config[i].rate = clock_rate;
-
- if (!clock_rate)
- mp->clk_config[i].type = DSS_CLK_AHB;
- else
- mp->clk_config[i].type = DSS_CLK_PCLK;
-
- clock_max_rate = 0;
- of_property_read_u32_index(pdev->dev.of_node, "clock-max-rate",
- i, &clock_max_rate);
- mp->clk_config[i].max_rate = clock_max_rate;
- }
-
-clk_err:
- return rc;
-}
-
#ifdef CONFIG_QCOM_BUS_SCALING
#define MAX_AXI_PORT_COUNT 3
@@ -681,16 +624,10 @@ int dpu_power_resource_init(struct platform_device *pdev,
mp = &phandle->mp;
phandle->dev = &pdev->dev;
- rc = dpu_power_parse_dt_clock(pdev, mp);
- if (rc) {
- pr_err("device clock parsing failed\n");
- goto end;
- }
-
rc = dpu_power_parse_dt_supply(pdev, mp);
if (rc) {
pr_err("device vreg supply parsing failed\n");
- goto parse_vreg_err;
+ return rc;
}
rc = msm_dss_config_vreg(&pdev->dev,
@@ -700,18 +637,6 @@ int dpu_power_resource_init(struct platform_device *pdev,
goto vreg_err;
}
- rc = msm_dss_get_clk(&pdev->dev, mp->clk_config, mp->num_clk);
- if (rc) {
- pr_err("clock get failed rc=%d\n", rc);
- goto clk_err;
- }
-
- rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
- if (rc) {
- pr_err("clock set rate failed rc=%d\n", rc);
- goto bus_err;
- }
-
rc = dpu_power_reg_bus_parse(pdev, phandle);
if (rc) {
pr_err("register bus parse failed rc=%d\n", rc);
@@ -742,18 +667,11 @@ int dpu_power_resource_init(struct platform_device *pdev,
dpu_power_data_bus_unregister(&phandle->data_bus_handle[i]);
dpu_power_reg_bus_unregister(phandle->reg_bus_hdl);
bus_err:
- msm_dss_put_clk(mp->clk_config, mp->num_clk);
-clk_err:
msm_dss_config_vreg(&pdev->dev, mp->vreg_config, mp->num_vreg, 0);
vreg_err:
if (mp->vreg_config)
devm_kfree(&pdev->dev, mp->vreg_config);
mp->num_vreg = 0;
-parse_vreg_err:
- if (mp->clk_config)
- devm_kfree(&pdev->dev, mp->clk_config);
- mp->num_clk = 0;
-end:
return rc;
}
@@ -796,19 +714,12 @@ void dpu_power_resource_deinit(struct platform_device *pdev,
dpu_power_reg_bus_unregister(phandle->reg_bus_hdl);
- msm_dss_put_clk(mp->clk_config, mp->num_clk);
-
msm_dss_config_vreg(&pdev->dev, mp->vreg_config, mp->num_vreg, 0);
- if (mp->clk_config)
- devm_kfree(&pdev->dev, mp->clk_config);
-
if (mp->vreg_config)
devm_kfree(&pdev->dev, mp->vreg_config);
mp->num_vreg = 0;
- mp->num_clk = 0;
-
}
int dpu_power_resource_enable(struct dpu_power_handle *phandle,
@@ -885,12 +796,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
goto reg_bus_hdl_err;
}
- rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
- if (rc) {
- pr_err("clock enable failed rc:%d\n", rc);
- goto clk_err;
- }
-
dpu_power_event_trigger_locked(phandle,
DPU_POWER_EVENT_POST_ENABLE);
@@ -898,8 +803,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
dpu_power_event_trigger_locked(phandle,
DPU_POWER_EVENT_PRE_DISABLE);
- msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
-
dpu_power_reg_bus_update(phandle->reg_bus_hdl,
max_usecase_ndx);
@@ -917,8 +820,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
mutex_unlock(&phandle->phandle_lock);
return rc;
-clk_err:
- dpu_power_reg_bus_update(phandle->reg_bus_hdl, prev_usecase_ndx);
reg_bus_hdl_err:
msm_dss_enable_vreg(mp->vreg_config, mp->num_vreg, 0);
vreg_err:
@@ -930,101 +831,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
return rc;
}
-int dpu_power_clk_set_rate(struct dpu_power_handle *phandle, char *clock_name,
- u64 rate)
-{
- int i, rc = -EINVAL;
- struct dss_module_power *mp;
-
- if (!phandle) {
- pr_err("invalid input power handle\n");
- return -EINVAL;
- }
- mp = &phandle->mp;
-
- for (i = 0; i < mp->num_clk; i++) {
- if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
- if (mp->clk_config[i].max_rate &&
- (rate > mp->clk_config[i].max_rate))
- rate = mp->clk_config[i].max_rate;
-
- mp->clk_config[i].rate = rate;
- rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
- break;
- }
- }
-
- return rc;
-}
-
-u64 dpu_power_clk_get_rate(struct dpu_power_handle *phandle, char *clock_name)
-{
- int i;
- struct dss_module_power *mp;
- u64 rate = -EINVAL;
-
- if (!phandle) {
- pr_err("invalid input power handle\n");
- return -EINVAL;
- }
- mp = &phandle->mp;
-
- for (i = 0; i < mp->num_clk; i++) {
- if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
- rate = clk_get_rate(mp->clk_config[i].clk);
- break;
- }
- }
-
- return rate;
-}
-
-u64 dpu_power_clk_get_max_rate(struct dpu_power_handle *phandle,
- char *clock_name)
-{
- int i;
- struct dss_module_power *mp;
- u64 rate = 0;
-
- if (!phandle) {
- pr_err("invalid input power handle\n");
- return 0;
- }
- mp = &phandle->mp;
-
- for (i = 0; i < mp->num_clk; i++) {
- if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
- rate = mp->clk_config[i].max_rate;
- break;
- }
- }
-
- return rate;
-}
-
-struct clk *dpu_power_clk_get_clk(struct dpu_power_handle *phandle,
- char *clock_name)
-{
- int i;
- struct dss_module_power *mp;
- struct clk *clk = NULL;
-
- if (!phandle) {
- pr_err("invalid input power handle\n");
- return 0;
- }
- mp = &phandle->mp;
-
- for (i = 0; i < mp->num_clk; i++) {
- if (!strcmp(mp->clk_config[i].clk_name, clock_name)) {
- clk = mp->clk_config[i].clk;
- break;
- }
- }
-
- return clk;
-}
-
struct dpu_power_event *dpu_power_handle_register_event(
struct dpu_power_handle *phandle,
u32 event_type, void (*cb_fnc)(u32 event_type, void *usr),
diff --git a/drivers/gpu/drm/msm/dpu_power_handle.h b/drivers/gpu/drm/msm/dpu_power_handle.h
index 1edae5c..83f048d 100644
--- a/drivers/gpu/drm/msm/dpu_power_handle.h
+++ b/drivers/gpu/drm/msm/dpu_power_handle.h
@@ -230,46 +230,6 @@ int dpu_power_data_bus_state_update(struct dpu_power_handle *phandle,
bool enable);
/**
- * dpu_power_clk_set_rate() - set the clock rate
- * @pdata: power handle containing the resources
- * @clock_name: clock name which needs rate update.
- * @rate: Requested rate.
- *
- * Return: error code.
- */
-int dpu_power_clk_set_rate(struct dpu_power_handle *pdata, char *clock_name,
- u64 rate);
-
-/**
- * dpu_power_clk_get_rate() - get the clock rate
- * @pdata: power handle containing the resources
- * @clock_name: clock name to get the rate
- *
- * Return: current clock rate
- */
-u64 dpu_power_clk_get_rate(struct dpu_power_handle *pdata, char *clock_name);
-
-/**
- * dpu_power_clk_get_max_rate() - get the maximum clock rate
- * @pdata: power handle containing the resources
- * @clock_name: clock name to get the max rate.
- *
- * Return: maximum clock rate or 0 if not found.
- */
-u64 dpu_power_clk_get_max_rate(struct dpu_power_handle *pdata,
- char *clock_name);
-
-/**
- * dpu_power_clk_get_clk() - get the clock
- * @pdata: power handle containing the resources
- * @clock_name: clock name to get the clk pointer.
- *
- * Return: Pointer to clock
- */
-struct clk *dpu_power_clk_get_clk(struct dpu_power_handle *phandle,
- char *clock_name);
-
-/**
* dpu_power_data_bus_set_quota() - set data bus quota for power client
* @phandle: power handle containing the resources
* @client: client information to set quota
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the Freedreno
mailing list