[Freedreno] [DPU PATCH v3 12/12] drm/msm/dpu: add error handling in dpu_core_perf_crtc_update

[Rajesh Yadav]

dpu_core_perf_crtc_update() is responsible for aggregating
the data bus bandwidth and dpu core clock rate requirements
and request the same for all active crtcs.
Currently, there is no error handling support in this function
so there is no way caller can know if the perf request fails.
This change adds error handling code in dpu_core_perf_crtc_update().
The caller side error handling is not added in this patch.

Changes in v3:
	- none

Signed-off-by: Rajesh Yadav <ryadav at codeaurora.org>
Reviewed-by: Sean Paul <seanpaul at chromium.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 37 ++++++++++++++++++---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  3 ++-
 2 files changed, 27 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index d3a1ed9..85c0229 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -248,7 +248,7 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
 	return 0;
 }
 
-static void _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
+static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 		struct drm_crtc *crtc, u32 bus_id)
 {
 	u64 bw_sum_of_intfs = 0, bus_ab_quota, bus_ib_quota;
@@ -257,6 +257,7 @@ static void _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 					= dpu_crtc_get_client_type(crtc);
 	struct drm_crtc *tmp_crtc;
 	struct dpu_crtc_state *dpu_cstate;
+	int ret = 0;
 
 	drm_for_each_crtc(tmp_crtc, crtc->dev) {
 		if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
@@ -286,25 +287,28 @@ static void _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
 
 	switch (curr_client_type) {
 	case NRT_CLIENT:
-		dpu_power_data_bus_set_quota(&kms->phandle, kms->core_client,
+		ret = dpu_power_data_bus_set_quota(
+				&kms->phandle, kms->core_client,
 				DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT,
 				bus_id, bus_ab_quota, bus_ib_quota);
 		DPU_DEBUG("client:%s bus_id=%d ab=%llu ib=%llu\n", "nrt",
-				bus_id, bus_ab_quota, bus_ib_quota);
+			  bus_id, bus_ab_quota, bus_ib_quota);
 		break;
 
 	case RT_CLIENT:
-		dpu_power_data_bus_set_quota(&kms->phandle, kms->core_client,
+		ret = dpu_power_data_bus_set_quota(
+				&kms->phandle, kms->core_client,
 				DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT,
 				bus_id, bus_ab_quota, bus_ib_quota);
 		DPU_DEBUG("client:%s bus_id=%d ab=%llu ib=%llu\n", "rt",
-				bus_id, bus_ab_quota, bus_ib_quota);
+			  bus_id, bus_ab_quota, bus_ib_quota);
 		break;
 
 	default:
 		DPU_ERROR("invalid client type:%d\n", curr_client_type);
 		break;
 	}
+	return ret;
 }
 
 /**
@@ -399,7 +403,7 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
 	return clk_rate;
 }
 
-void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
+int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 		int params_changed, bool stop_req)
 {
 	struct dpu_core_perf_params *new, *old;
@@ -410,16 +414,17 @@ void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 	int i;
 	struct msm_drm_private *priv;
 	struct dpu_kms *kms;
+	int ret;
 
 	if (!crtc) {
 		DPU_ERROR("invalid crtc\n");
-		return;
+		return -EINVAL;
 	}
 
 	kms = _dpu_crtc_get_kms(crtc);
 	if (!kms || !kms->catalog) {
 		DPU_ERROR("invalid kms\n");
-		return;
+		return -EINVAL;
 	}
 	priv = kms->dev->dev_private;
 
@@ -482,8 +487,14 @@ void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 				update_bus, update_clk);
 
 	for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
-		if (update_bus & BIT(i))
-			_dpu_core_perf_crtc_update_bus(kms, crtc, i);
+		if (update_bus & BIT(i)) {
+			ret = _dpu_core_perf_crtc_update_bus(kms, crtc, i);
+			if (ret) {
+				DPU_ERROR("crtc-%d: failed to update bw vote for bus-%d\n",
+					  crtc->base.id, i);
+				return ret;
+			}
+		}
 	}
 
 	/*
@@ -495,15 +506,17 @@ void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 
 		DPU_EVT32(kms->dev, stop_req, clk_rate);
 
-		if (_dpu_core_perf_set_core_clk_rate(kms, clk_rate)) {
+		ret = _dpu_core_perf_set_core_clk_rate(kms, clk_rate);
+		if (ret) {
 			DPU_ERROR("failed to set %s clock rate %llu\n",
 					kms->perf.core_clk->clk_name, clk_rate);
-			return;
+			return ret;
 		}
 
 		kms->perf.core_clk_rate = clk_rate;
 		DPU_DEBUG("update clk rate = %lld HZ\n", clk_rate);
 	}
+	return 0;
 }
 
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
index 5198e3c..fbcbe0c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
@@ -91,8 +91,9 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
  * @crtc: Pointer to crtc
  * @params_changed: true if crtc parameters are modified
  * @stop_req: true if this is a stop request
+ * return: zero if success, or error code otherwise
  */
-void dpu_core_perf_crtc_update(struct drm_crtc *crtc,
+int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
 		int params_changed, bool stop_req);
 
 /**
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project