[Freedreno] [PATCH 2/2] drm/msm: dpu: Make legacy cursor updates asynchronous
Jeykumar Sankaran
jsanka at codeaurora.org
Wed Oct 3 01:19:52 UTC 2018
On 2018-10-01 13:30, Sean Paul wrote:
> On Wed, Sep 26, 2018 at 11:56:47AM -0700, Jeykumar Sankaran wrote:
>> On 2018-09-19 11:56, Sean Paul wrote:
>> > From: Sean Paul <seanpaul at chromium.org>
>> >
>> > This patch sprinkles a few async/legacy_cursor_update checks
>> > through commit to ensure that cursor updates aren't blocked on vsync.
>> > There are 2 main components to this, the first is that we don't want
> to
>> > wait_for_commit_done in msm_atomic before returning from
>> > atomic_complete.
>> > The second is that in dpu we don't want to wait for frame_done events
>> > when
>> > updating the cursor.
>> >
>> > Signed-off-by: Sean Paul <seanpaul at chromium.org>
>> > ---
>> > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 44
> +++++++++++----------
>> > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h | 3 +-
>> > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 21 ++++++----
>> > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 6 ++-
>> > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 5 ++-
>> > drivers/gpu/drm/msm/msm_atomic.c | 3 +-
>> > 6 files changed, 48 insertions(+), 34 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> > index a8f2dd7a37c7..b23f00a2554b 100644
>> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> > @@ -816,7 +816,7 @@ static int _dpu_crtc_wait_for_frame_done(struct
>> > drm_crtc *crtc)
>> > return rc;
>> > }
>> >
>> > -void dpu_crtc_commit_kickoff(struct drm_crtc *crtc)
>> > +void dpu_crtc_commit_kickoff(struct drm_crtc *crtc, bool async)
>> > {
>> > struct drm_encoder *encoder;
>> > struct drm_device *dev;
>> > @@ -862,27 +862,30 @@ void dpu_crtc_commit_kickoff(struct drm_crtc
>> > *crtc)
>> > * Encoder will flush/start now, unless it has a tx
>> > pending.
>> > * If so, it may delay and flush at an irq event (e.g.
>> > ppdone)
>> > */
>> > - dpu_encoder_prepare_for_kickoff(encoder, ¶ms);
>> > + dpu_encoder_prepare_for_kickoff(encoder, ¶ms, async);
>> > }
>> >
>> > - /* wait for frame_event_done completion */
>> > - DPU_ATRACE_BEGIN("wait_for_frame_done_event");
>> > - ret = _dpu_crtc_wait_for_frame_done(crtc);
>> > - DPU_ATRACE_END("wait_for_frame_done_event");
>> > - if (ret) {
>> > - DPU_ERROR("crtc%d wait for frame done
>> > failed;frame_pending%d\n",
>> > - crtc->base.id,
>> > - atomic_read(&dpu_crtc->frame_pending));
>> > - goto end;
>> > - }
>> >
>> > - if (atomic_inc_return(&dpu_crtc->frame_pending) == 1) {
>> > - /* acquire bandwidth and other resources */
>> > - DPU_DEBUG("crtc%d first commit\n", crtc->base.id);
>> > - } else
>> > - DPU_DEBUG("crtc%d commit\n", crtc->base.id);
>> > + if (!async) {
>> > + /* wait for frame_event_done completion */
>> > + DPU_ATRACE_BEGIN("wait_for_frame_done_event");
>> > + ret = _dpu_crtc_wait_for_frame_done(crtc);
>> > + DPU_ATRACE_END("wait_for_frame_done_event");
>> > + if (ret) {
>> > + DPU_ERROR("crtc%d wait for frame done
>> > failed;frame_pending%d\n",
>> > + crtc->base.id,
>> > +
>> > atomic_read(&dpu_crtc->frame_pending));
>> > + goto end;
>> > + }
>> > +
>> > + if (atomic_inc_return(&dpu_crtc->frame_pending) == 1) {
>> > + /* acquire bandwidth and other resources */
>> > + DPU_DEBUG("crtc%d first commit\n", crtc->base.id);
>> > + } else
>> > + DPU_DEBUG("crtc%d commit\n", crtc->base.id);
>> >
>> > - dpu_crtc->play_count++;
>> > + dpu_crtc->play_count++;
>> > + }
>> >
>> > dpu_vbif_clear_errors(dpu_kms);
>> >
>> > @@ -890,11 +893,12 @@ void dpu_crtc_commit_kickoff(struct drm_crtc
>> > *crtc)
>> > if (encoder->crtc != crtc)
>> > continue;
>> >
>> > - dpu_encoder_kickoff(encoder);
>> > + dpu_encoder_kickoff(encoder, async);
>> > }
>> >
>> > end:
>> > - reinit_completion(&dpu_crtc->frame_done_comp);
>> > + if (!async)
>> > + reinit_completion(&dpu_crtc->frame_done_comp);
>> > DPU_ATRACE_END("crtc_commit");
>> > }
>> >
>> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
>> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
>> > index 3723b4830335..67c9f59997cf 100644
>> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
>> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
>> > @@ -285,8 +285,9 @@ int dpu_crtc_vblank(struct drm_crtc *crtc, bool
> en);
>> > /**
>> > * dpu_crtc_commit_kickoff - trigger kickoff of the commit for this
>> > crtc
>> > * @crtc: Pointer to drm crtc object
>> > + * @async: true if the commit is asynchronous, false otherwise
>> > */
>> > -void dpu_crtc_commit_kickoff(struct drm_crtc *crtc);
>> > +void dpu_crtc_commit_kickoff(struct drm_crtc *crtc, bool async);
>> >
>> > /**
>> > * dpu_crtc_complete_commit - callback signalling completion of
> current
>> > commit
>> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> > index c2e8985b4c54..fc729fc8dd8c 100644
>> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>> > @@ -1410,7 +1410,7 @@ static void dpu_encoder_off_work(struct
>> > kthread_work
>> > *work)
>> > * extra_flush_bits: Additional bit mask to include in flush trigger
>> > */
>> > static inline void _dpu_encoder_trigger_flush(struct drm_encoder
>> > *drm_enc,
>> > - struct dpu_encoder_phys *phys, uint32_t extra_flush_bits)
>> > + struct dpu_encoder_phys *phys, uint32_t extra_flush_bits,
>> > bool async)
>> > {
>> > struct dpu_hw_ctl *ctl;
>> > int pending_kickoff_cnt;
>> > @@ -1433,7 +1433,10 @@ static inline void
>> > _dpu_encoder_trigger_flush(struct drm_encoder *drm_enc,
>> > return;
>> > }
>> >
>> > - pending_kickoff_cnt = dpu_encoder_phys_inc_pending(phys);
>> > + if (!async)
>> > + pending_kickoff_cnt = dpu_encoder_phys_inc_pending(phys);
>> > + else
>> > + pending_kickoff_cnt =
>> > atomic_read(&phys->pending_kickoff_cnt);
>> >
>> > if (extra_flush_bits && ctl->ops.update_pending_flush)
>> > ctl->ops.update_pending_flush(ctl, extra_flush_bits);
>> > @@ -1545,7 +1548,8 @@ void dpu_encoder_helper_hw_reset(struct
>> > dpu_encoder_phys *phys_enc)
>> > * a time.
>> > * dpu_enc: Pointer to virtual encoder structure
>> > */
>> > -static void _dpu_encoder_kickoff_phys(struct dpu_encoder_virt
> *dpu_enc)
>> > +static void _dpu_encoder_kickoff_phys(struct dpu_encoder_virt
> *dpu_enc,
>> > + bool async)
>> > {
>> > struct dpu_hw_ctl *ctl;
>> > uint32_t i, pending_flush;
>> > @@ -1576,7 +1580,8 @@ static void _dpu_encoder_kickoff_phys(struct
>> > dpu_encoder_virt *dpu_enc)
>> > set_bit(i, dpu_enc->frame_busy_mask);
>> > if (!phys->ops.needs_single_flush ||
>> > !phys->ops.needs_single_flush(phys))
>> > - _dpu_encoder_trigger_flush(&dpu_enc->base, phys,
>> > 0x0);
>> > + _dpu_encoder_trigger_flush(&dpu_enc->base, phys,
>> > 0x0,
>> > + async);
>> > else if (ctl->ops.get_pending_flush)
>> > pending_flush |= ctl->ops.get_pending_flush(ctl);
>> > }
>> > @@ -1586,7 +1591,7 @@ static void _dpu_encoder_kickoff_phys(struct
>> > dpu_encoder_virt *dpu_enc)
>> > _dpu_encoder_trigger_flush(
>> > &dpu_enc->base,
>> > dpu_enc->cur_master,
>> > - pending_flush);
>> > + pending_flush, async);
>> > }
>> >
>> > _dpu_encoder_trigger_start(dpu_enc->cur_master);
>> > @@ -1770,7 +1775,7 @@ static void
>> > dpu_encoder_vsync_event_work_handler(struct kthread_work *work)
>> > }
>> >
>> > void dpu_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc,
>> > - struct dpu_encoder_kickoff_params *params)
>> > + struct dpu_encoder_kickoff_params *params, bool async)
>> > {
>> > struct dpu_encoder_virt *dpu_enc;
>> > struct dpu_encoder_phys *phys;
>> > @@ -1811,7 +1816,7 @@ void dpu_encoder_prepare_for_kickoff(struct
>> > drm_encoder *drm_enc,
>> > }
>> > }
>> >
>> > -void dpu_encoder_kickoff(struct drm_encoder *drm_enc)
>> > +void dpu_encoder_kickoff(struct drm_encoder *drm_enc, bool async)
>> > {
>> > struct dpu_encoder_virt *dpu_enc;
>> > struct dpu_encoder_phys *phys;
>> > @@ -1834,7 +1839,7 @@ void dpu_encoder_kickoff(struct drm_encoder
>> > *drm_enc)
>> > ((atomic_read(&dpu_enc->frame_done_timeout) * HZ) /
>> > 1000));
>> >
>> > /* All phys encs are ready to go, trigger the kickoff */
>> > - _dpu_encoder_kickoff_phys(dpu_enc);
>> > + _dpu_encoder_kickoff_phys(dpu_enc, async);
>> >
>> > /* allow phys encs to handle any post-kickoff business */
>> > for (i = 0; i < dpu_enc->num_phys_encs; i++) {
>> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> > index 9dbf38f446d9..c2044122d609 100644
>> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
>> > @@ -81,9 +81,10 @@ void
> dpu_encoder_register_frame_event_callback(struct
>> > drm_encoder *encoder,
>> > * Delayed: Block until next trigger can be issued.
>> > * @encoder: encoder pointer
>> > * @params: kickoff time parameters
>> > + * @async: true if this is an asynchronous commit
>> > */
>> > void dpu_encoder_prepare_for_kickoff(struct drm_encoder *encoder,
>> > - struct dpu_encoder_kickoff_params *params);
>> > + struct dpu_encoder_kickoff_params *params, bool async);
>> >
>> > /**
>> > * dpu_encoder_trigger_kickoff_pending - Clear the flush bits from
>> > previous
>> > @@ -96,8 +97,9 @@ void dpu_encoder_trigger_kickoff_pending(struct
>> > drm_encoder *encoder);
>> > * dpu_encoder_kickoff - trigger a double buffer flip of the ctl path
>> > * (i.e. ctl flush and start) immediately.
>> > * @encoder: encoder pointer
>> > + * @async: true if this is an asynchronous commit
>> > */
>> > -void dpu_encoder_kickoff(struct drm_encoder *encoder);
>> > +void dpu_encoder_kickoff(struct drm_encoder *encoder, bool async);
>> >
>> > /**
>> > * dpu_encoder_wait_for_event - Waits for encoder events
>> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> > index 0a683e65a9f3..1cba21edd862 100644
>> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
>> > @@ -352,7 +352,7 @@ void dpu_kms_encoder_enable(struct drm_encoder
>> > *encoder)
>> >
>> > if (crtc && crtc->state->active) {
>> > trace_dpu_kms_enc_enable(DRMID(crtc));
>> > - dpu_crtc_commit_kickoff(crtc);
>> > + dpu_crtc_commit_kickoff(crtc, false);
>> > }
>> > }
>> >
>> > @@ -369,7 +369,8 @@ static void dpu_kms_commit(struct msm_kms *kms,
>> > struct
>> > drm_atomic_state *state)
>> >
>> > if (crtc->state->active) {
>> > trace_dpu_kms_commit(DRMID(crtc));
>> > - dpu_crtc_commit_kickoff(crtc);
>> > + dpu_crtc_commit_kickoff(crtc,
>> > +
>> > state->legacy_cursor_update);
>> > }
>> > }
>> > }
>> > diff --git a/drivers/gpu/drm/msm/msm_atomic.c
>> > b/drivers/gpu/drm/msm/msm_atomic.c
>> > index c1f1779c980f..7912130ce5ce 100644
>> > --- a/drivers/gpu/drm/msm/msm_atomic.c
>> > +++ b/drivers/gpu/drm/msm/msm_atomic.c
>> > @@ -76,7 +76,8 @@ void msm_atomic_commit_tail(struct drm_atomic_state
>> > *state)
>> > kms->funcs->commit(kms, state);
>> > }
>> >
>> > - msm_atomic_wait_for_commit_done(dev, state);
>> > + if (!state->legacy_cursor_update)
>> I see state->async_update is updated after validation checks on the
> async
>> capabilities. Shouldn't we use
>> that var instead of state->legacy_cursor_update?
>> > + msm_atomic_wait_for_commit_done(dev, state);
>> >
>> > kms->funcs->complete_commit(kms, state);
>>
>> Do we need to introduce plane helpers atomic_async_update and
>> atomic_async_check in DPU before supporting
>> these wait skips? or are they irrelevant for this legacy async path?
>
> I was trying to limit the scope of this to just cursor updates. I think
> once/if
> support is added for generic async it makes sense to change over to
> that
> verbage.
>
Since SDM845 doesnt support dedicated CURSOR stages, I think the right
way to add the cursor support should be to introduce the atomic async
support
in the driver and let the cursor frame update like regulary async
commit.
I need to explore on the right way to fit that in.
Thanks,
Jeykumar S.
> Sean
>
>>
>> --
>> Jeykumar S
--
Jeykumar S
More information about the Freedreno
mailing list