[Freedreno] [PATCH] drm: remove redundant 'default n' from Kconfig
Bartlomiej Zolnierkiewicz
b.zolnierkie at samsung.com
Fri Apr 12 09:56:06 UTC 2019
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
---
drivers/gpu/drm/Kconfig | 5 -----
drivers/gpu/drm/amd/amdgpu/Kconfig | 1 -
drivers/gpu/drm/arm/Kconfig | 1 -
drivers/gpu/drm/exynos/Kconfig | 2 --
drivers/gpu/drm/i915/Kconfig | 3 ---
drivers/gpu/drm/i915/Kconfig.debug | 13 -------------
drivers/gpu/drm/msm/Kconfig | 2 --
drivers/gpu/drm/nouveau/Kconfig | 2 --
drivers/gpu/drm/omapdrm/Kconfig | 1 -
drivers/gpu/drm/omapdrm/dss/Kconfig | 6 ------
10 files changed, 36 deletions(-)
Index: b/drivers/gpu/drm/Kconfig
===================================================================
--- a/drivers/gpu/drm/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/Kconfig 2019-04-12 11:42:30.066095359 +0200
@@ -37,7 +37,6 @@ config DRM_DP_AUX_CHARDEV
config DRM_DEBUG_MM
bool "Insert extra checks and debug info into the DRM range managers"
- default n
depends on DRM=y
depends on STACKTRACE_SUPPORT
select STACKDEPOT
@@ -56,7 +55,6 @@ config DRM_DEBUG_SELFTEST
select PRIME_NUMBERS
select DRM_LIB_RANDOM
select DRM_KMS_HELPER
- default n
help
This option provides kernel modules that can be used to run
various selftests on parts of the DRM api. This option is not
@@ -113,7 +111,6 @@ config DRM_FBDEV_OVERALLOC
config DRM_FBDEV_LEAK_PHYS_SMEM
bool "Shamelessly allow leaking of fbdev physical address (DANGEROUS)"
depends on DRM_FBDEV_EMULATION && EXPERT
- default n
help
In order to keep user-space compatibility, we want in certain
use-cases to keep leaking the fbdev physical address to the
@@ -247,7 +244,6 @@ config DRM_VKMS
tristate "Virtual KMS (EXPERIMENTAL)"
depends on DRM
select DRM_KMS_HELPER
- default n
help
Virtual Kernel Mode-Setting (VKMS) is used for testing or for
running GPU in a headless machines. Choose this option to get
@@ -424,4 +420,3 @@ config DRM_PANEL_ORIENTATION_QUIRKS
config DRM_LIB_RANDOM
bool
- default n
Index: b/drivers/gpu/drm/amd/amdgpu/Kconfig
===================================================================
--- a/drivers/gpu/drm/amd/amdgpu/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/amd/amdgpu/Kconfig 2019-04-12 11:42:30.066095359 +0200
@@ -35,7 +35,6 @@ config DRM_AMDGPU_GART_DEBUGFS
bool "Allow GART access through debugfs"
depends on DRM_AMDGPU
depends on DEBUG_FS
- default n
help
Selecting this option creates a debugfs file to inspect the mapped
pages. Uses more memory for housekeeping, enable only for debugging.
Index: b/drivers/gpu/drm/arm/Kconfig
===================================================================
--- a/drivers/gpu/drm/arm/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/arm/Kconfig 2019-04-12 11:42:30.066095359 +0200
@@ -16,7 +16,6 @@ config DRM_HDLCD
config DRM_HDLCD_SHOW_UNDERRUN
bool "Show underrun conditions"
depends on DRM_HDLCD
- default n
help
Enable this option to show in red colour the pixels that the
HDLCD device did not fetch from framebuffer due to underrun
Index: b/drivers/gpu/drm/exynos/Kconfig
===================================================================
--- a/drivers/gpu/drm/exynos/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/exynos/Kconfig 2019-04-12 11:42:30.066095359 +0200
@@ -46,7 +46,6 @@ config DRM_EXYNOS_DPI
bool "Parallel output"
depends on DRM_EXYNOS_FIMD
select DRM_PANEL
- default n
help
This enables support for Exynos parallel output.
@@ -55,7 +54,6 @@ config DRM_EXYNOS_DSI
depends on DRM_EXYNOS_FIMD || DRM_EXYNOS5433_DECON || DRM_EXYNOS7_DECON
select DRM_MIPI_DSI
select DRM_PANEL
- default n
help
This enables support for Exynos MIPI-DSI device.
Index: b/drivers/gpu/drm/i915/Kconfig
===================================================================
--- a/drivers/gpu/drm/i915/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/i915/Kconfig 2019-04-12 11:42:30.066095359 +0200
@@ -45,7 +45,6 @@ config DRM_I915
config DRM_I915_ALPHA_SUPPORT
bool "Enable alpha quality support for new Intel hardware by default"
depends on DRM_I915
- default n
help
Choose this option if you have new Intel hardware and want to enable
the alpha quality i915 driver support for the hardware in this kernel
@@ -99,7 +98,6 @@ config DRM_I915_GVT
bool "Enable Intel GVT-g graphics virtualization host support"
depends on DRM_I915
depends on 64BIT
- default n
help
Choose this option if you want to enable Intel GVT-g graphics
virtualization technology host support with integrated graphics.
@@ -123,7 +121,6 @@ config DRM_I915_GVT_KVMGT
depends on DRM_I915_GVT
depends on KVM
depends on VFIO_MDEV && VFIO_MDEV_DEVICE
- default n
help
Choose this option if you want to enable KVMGT support for
Intel GVT-g.
Index: b/drivers/gpu/drm/i915/Kconfig.debug
===================================================================
--- a/drivers/gpu/drm/i915/Kconfig.debug 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/i915/Kconfig.debug 2019-04-12 11:42:30.066095359 +0200
@@ -6,7 +6,6 @@ config DRM_I915_WERROR
# We use the dependency on !COMPILE_TEST to not be enabled in
# allmodconfig or allyesconfig configurations
depends on !COMPILE_TEST
- default n
help
Add -Werror to the build flags for (and only for) i915.ko.
Do not enable this unless you are writing code for the i915.ko module.
@@ -31,7 +30,6 @@ config DRM_I915_DEBUG
select DRM_I915_SW_FENCE_DEBUG_OBJECTS
select DRM_I915_SELFTEST
select DRM_I915_DEBUG_RUNTIME_PM
- default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will catch some internal issues.
@@ -42,7 +40,6 @@ config DRM_I915_DEBUG
config DRM_I915_DEBUG_GEM
bool "Insert extra checks into the GEM internals"
- default n
depends on DRM_I915_WERROR
help
Enable extra sanity checks (including BUGs) along the GEM driver
@@ -54,7 +51,6 @@ config DRM_I915_DEBUG_GEM
config DRM_I915_ERRLOG_GEM
bool "Insert extra logging (very verbose) for common GEM errors"
- default n
depends on DRM_I915_DEBUG_GEM
help
Enable additional logging that may help track down the cause of
@@ -68,7 +64,6 @@ config DRM_I915_TRACE_GEM
bool "Insert extra ftrace output from the GEM internals"
depends on DRM_I915_DEBUG_GEM
select TRACING
- default n
help
Enable additional and verbose debugging output that will spam
ordinary tests, but may be vital for post-mortem debugging when
@@ -82,7 +77,6 @@ config DRM_I915_SW_FENCE_DEBUG_OBJECTS
bool "Enable additional driver debugging for fence objects"
depends on DRM_I915
select DEBUG_OBJECTS
- default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will catch some internal issues.
@@ -94,7 +88,6 @@ config DRM_I915_SW_FENCE_DEBUG_OBJECTS
config DRM_I915_SW_FENCE_CHECK_DAG
bool "Enable additional driver debugging for detecting dependency cycles"
depends on DRM_I915
- default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will catch some internal issues.
@@ -106,7 +99,6 @@ config DRM_I915_SW_FENCE_CHECK_DAG
config DRM_I915_DEBUG_GUC
bool "Enable additional driver debugging for GuC"
depends on DRM_I915
- default n
help
Choose this option to turn on extra driver debugging that may affect
performance but will help resolve GuC related issues.
@@ -118,7 +110,6 @@ config DRM_I915_DEBUG_GUC
config DRM_I915_SELFTEST
bool "Enable selftests upon driver load"
depends on DRM_I915
- default n
select FAULT_INJECTION
select PRIME_NUMBERS
help
@@ -135,7 +126,6 @@ config DRM_I915_SELFTEST_BROKEN
bool "Enable broken and dangerous selftests"
depends on DRM_I915_SELFTEST
depends on BROKEN
- default n
help
This option enables the execution of selftests that are "dangerous"
and may trigger unintended HW side-effects as they break strict
@@ -148,7 +138,6 @@ config DRM_I915_SELFTEST_BROKEN
config DRM_I915_LOW_LEVEL_TRACEPOINTS
bool "Enable low level request tracing events"
depends on DRM_I915
- default n
help
Choose this option to turn on low level request tracing events.
This provides the ability to precisely monitor engine utilisation
@@ -159,7 +148,6 @@ config DRM_I915_LOW_LEVEL_TRACEPOINTS
config DRM_I915_DEBUG_VBLANK_EVADE
bool "Enable extra debug warnings for vblank evasion"
depends on DRM_I915
- default n
help
Choose this option to turn on extra debug warnings for the
vblank evade mechanism. This gives a warning every time the
@@ -172,7 +160,6 @@ config DRM_I915_DEBUG_VBLANK_EVADE
config DRM_I915_DEBUG_RUNTIME_PM
bool "Enable extra state checking for runtime PM"
depends on DRM_I915
- default n
select STACKDEPOT
help
Choose this option to turn on extra state checking for the
Index: b/drivers/gpu/drm/msm/Kconfig
===================================================================
--- a/drivers/gpu/drm/msm/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/msm/Kconfig 2019-04-12 11:42:30.066095359 +0200
@@ -24,7 +24,6 @@ config DRM_MSM
config DRM_MSM_REGISTER_LOGGING
bool "MSM DRM register logging"
depends on DRM_MSM
- default n
help
Compile in support for logging register reads/writes in a format
that can be parsed by envytools demsm tool. If enabled, register
@@ -33,7 +32,6 @@ config DRM_MSM_REGISTER_LOGGING
config DRM_MSM_GPU_SUDO
bool "Enable SUDO flag on submits"
depends on DRM_MSM && EXPERT
- default n
help
Enable userspace that has CAP_SYS_RAWIO to submit GPU commands
that are run from RB instead of IB1. This essentially gives
Index: b/drivers/gpu/drm/nouveau/Kconfig
===================================================================
--- a/drivers/gpu/drm/nouveau/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/nouveau/Kconfig 2019-04-12 11:43:25.998096767 +0200
@@ -60,7 +60,6 @@ config NOUVEAU_DEBUG_DEFAULT
config NOUVEAU_DEBUG_MMU
bool "Enable additional MMU debugging"
depends on DRM_NOUVEAU
- default n
help
Say Y here if you want to enable verbose MMU debug output.
@@ -79,7 +78,6 @@ config DRM_NOUVEAU_SVM
depends on STAGING
select HMM_MIRROR
select DEVICE_PRIVATE
- default n
help
Say Y here if you want to enable experimental support for
Shared Virtual Memory (SVM).
Index: b/drivers/gpu/drm/omapdrm/Kconfig
===================================================================
--- a/drivers/gpu/drm/omapdrm/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/omapdrm/Kconfig 2019-04-12 11:42:30.070095359 +0200
@@ -4,7 +4,6 @@ config DRM_OMAP
depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM
select OMAP2_DSS
select DRM_KMS_HELPER
- default n
help
DRM display driver for OMAP2/3/4 based boards.
Index: b/drivers/gpu/drm/omapdrm/dss/Kconfig
===================================================================
--- a/drivers/gpu/drm/omapdrm/dss/Kconfig 2019-04-12 11:42:30.070095359 +0200
+++ b/drivers/gpu/drm/omapdrm/dss/Kconfig 2019-04-12 11:42:30.070095359 +0200
@@ -17,7 +17,6 @@ if OMAP2_DSS
config OMAP2_DSS_DEBUG
bool "Debug support"
- default n
help
This enables printing of debug messages. Alternatively, debug messages
can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting
@@ -26,7 +25,6 @@ config OMAP2_DSS_DEBUG
config OMAP2_DSS_DEBUGFS
bool "Debugfs filesystem support"
depends on DEBUG_FS
- default n
help
This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables
querying about clock configuration and register configuration of dss,
@@ -35,7 +33,6 @@ config OMAP2_DSS_DEBUGFS
config OMAP2_DSS_COLLECT_IRQ_STATS
bool "Collect DSS IRQ statistics"
depends on OMAP2_DSS_DEBUGFS
- default n
help
Collect DSS IRQ statistics, printable via debugfs.
@@ -75,7 +72,6 @@ config OMAP4_DSS_HDMI_CEC
config OMAP5_DSS_HDMI
bool "HDMI support for OMAP5"
- default n
select OMAP2_DSS_HDMI_COMMON
help
HDMI Interface for OMAP5 and similar cores. This adds the High
@@ -84,7 +80,6 @@ config OMAP5_DSS_HDMI
config OMAP2_DSS_SDI
bool "SDI support"
- default n
help
SDI (Serial Display Interface) support.
@@ -93,7 +88,6 @@ config OMAP2_DSS_SDI
config OMAP2_DSS_DSI
bool "DSI support"
- default n
help
MIPI DSI (Display Serial Interface) support.
More information about the Freedreno
mailing list