[Freedreno] [PATCH RFC 10/11] ARM: dts: qcom: msm8974: add HDMI nodes

[Brian Masney]

Add HDMI tx and phy nodes to support an external display that can be
connected over the SlimPort. This is based on work from Jonathan Marek.

Signed-off-by: Brian Masney <masneyb at onstation.org>
---
The hdmi-tx node in the downstream MSM sources:
https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/arch/arm/boot/dts/msm8974-mdss.dtsi#L101

 arch/arm/boot/dts/qcom-msm8974.dtsi | 80 +++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 369e58f64145..35c51336a9d4 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1139,6 +1139,13 @@
 
 					port at 0 {
 						reg = <0>;
+						mdp5_intf3_out: endpoint {
+							remote-endpoint = <&hdmi_in>;
+						};
+					};
+
+					port at 1 {
+						reg = <1>;
 						mdp5_intf1_out: endpoint {
 							remote-endpoint = <&dsi0_in>;
 						};
@@ -1216,6 +1223,79 @@
 				clocks = <&mmcc MDSS_AHB_CLK>;
 				clock-names = "iface";
 			};
+
+			hdmi: hdmi-tx at fd922100 {
+				status = "disabled";
+
+				compatible = "qcom,hdmi-tx-8974";
+				reg = <0xfd922100 0x35c>,
+				      <0xfc4b8000 0x60f0>;
+				reg-names = "core_physical",
+				            "qfprom_physical";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+				power-domains = <&mmcc MDSS_GDSC>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+				         <&mmcc MDSS_AHB_CLK>,
+				         <&mmcc MDSS_HDMI_CLK>,
+				         <&mmcc MDSS_HDMI_AHB_CLK>,
+				         <&mmcc MDSS_EXTPCLK_CLK>;
+				clock-names = "mdp_core",
+				              "iface",
+				              "core",
+				              "alt_iface",
+				              "extp";
+
+				hpd-5v-supply = <&pm8941_5vs2>;
+				core-vdda-supply = <&pm8941_l12>;
+				core-vcc-supply = <&pm8941_s3>;
+
+				/*
+				 * FIXME - drivers/gpu/drm/msm/hdmi/hdmi.c via hpd_reg_names_8x74
+				 * looks for hpd-gdsc-supply. What should be used here? Shouldn't
+				 * this functionality be provided by the power-domains above?
+				 */
+
+				phys = <&hdmi_phy>;
+				phy-names = "hdmi_phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+						hdmi_in: endpoint {
+							remote-endpoint = <&mdp5_intf3_out>;
+						};
+					};
+
+					port at 1 {
+						reg = <1>;
+					};
+				};
+			};
+
+			hdmi_phy: hdmi-phy at fd922500 {
+				status = "disabled";
+
+				compatible = "qcom,hdmi-phy-8974";
+				reg = <0xfd922500 0x7c>;
+				reg-names = "hdmi_phy";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+				         <&mmcc MDSS_HDMI_AHB_CLK>;
+				clock-names = "iface",
+				              "alt_iface";
+
+				core-vdda-supply = <&pm8941_l12>;
+				vddio-supply = <&pm8941_s3>;
+
+				#phy-cells = <0>;
+			};
 		};
 	};
 
-- 
2.21.0