[Freedreno] [PATCH v6 4/7] firmware: qcom: scm: add support to restore secure config to qcm_scm-32
Bjorn Andersson
bjorn.andersson at linaro.org
Thu Aug 22 14:50:14 UTC 2019
On Thu 22 Aug 07:37 PDT 2019, Brian Masney wrote:
> From: Rob Clark <robdclark at gmail.com>
>
> Add support to restore the secure configuration for qcm_scm-32.c. This
> is needed by the On Chip MEMory (OCMEM) that is present on some
> Snapdragon devices.
>
> Signed-off-by: Rob Clark <robdclark at gmail.com>
> [masneyb at onstation.org: ported to latest kernel; set ctx_bank_num to
> spare parameter.]
> Signed-off-by: Brian Masney <masneyb at onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson at linaro.org>
> ---
> Changes since v5:
> - None
>
> Changes since v4:
> - None
>
> Changes since v3:
> - None
>
> Changes since v2:
> - None
>
> Changes since v1:
> - Use existing __qcom_scm_restore_sec_cfg() function stub in
> qcom_scm-32.c that was unimplemented
> - Set the cfg.ctx_bank_num to the spare function parameter. It was
> previously set to the device_id.
>
> drivers/firmware/qcom_scm-32.c | 17 ++++++++++++++++-
> drivers/firmware/qcom_scm.c | 13 +++++++++++++
> include/linux/qcom_scm.h | 11 +++++++++++
> 3 files changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
> index 4c2514e5e249..5d90b7f5ab5a 100644
> --- a/drivers/firmware/qcom_scm-32.c
> +++ b/drivers/firmware/qcom_scm-32.c
> @@ -617,7 +617,22 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
> int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
> u32 spare)
> {
> - return -ENODEV;
> + struct msm_scm_sec_cfg {
> + __le32 id;
> + __le32 ctx_bank_num;
> + } cfg;
> + int ret, scm_ret = 0;
> +
> + cfg.id = cpu_to_le32(device_id);
> + cfg.ctx_bank_num = cpu_to_le32(spare);
> +
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
> + &cfg, sizeof(cfg), &scm_ret, sizeof(scm_ret));
> +
> + if (ret || scm_ret)
> + return ret ? ret : -EINVAL;
> +
> + return 0;
> }
>
> int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 7e285ff3961d..27c1d98a34e6 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -367,6 +367,19 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
> .deassert = qcom_scm_pas_reset_deassert,
> };
>
> +/**
> + * qcom_scm_restore_sec_cfg_available() - Check if secure environment
> + * supports restore security config interface.
> + *
> + * Return true if restore-cfg interface is supported, false if not.
> + */
> +bool qcom_scm_restore_sec_cfg_available(void)
> +{
> + return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP,
> + QCOM_SCM_RESTORE_SEC_CFG);
> +}
> +EXPORT_SYMBOL(qcom_scm_restore_sec_cfg_available);
> +
> int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
> {
> return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
> diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
> index b49b734d662c..04382e1798e4 100644
> --- a/include/linux/qcom_scm.h
> +++ b/include/linux/qcom_scm.h
> @@ -34,6 +34,16 @@ enum qcom_scm_ocmem_client {
> QCOM_SCM_OCMEM_DEBUG_ID,
> };
>
> +enum qcom_scm_sec_dev_id {
> + QCOM_SCM_MDSS_DEV_ID = 1,
> + QCOM_SCM_OCMEM_DEV_ID = 5,
> + QCOM_SCM_PCIE0_DEV_ID = 11,
> + QCOM_SCM_PCIE1_DEV_ID = 12,
> + QCOM_SCM_GFX_DEV_ID = 18,
> + QCOM_SCM_UFS_DEV_ID = 19,
> + QCOM_SCM_ICE_DEV_ID = 20,
> +};
> +
> #define QCOM_SCM_VMID_HLOS 0x3
> #define QCOM_SCM_VMID_MSS_MSA 0xF
> #define QCOM_SCM_VMID_WLAN 0x18
> @@ -70,6 +80,7 @@ extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
> extern void qcom_scm_cpu_power_down(u32 flags);
> extern u32 qcom_scm_get_version(void);
> extern int qcom_scm_set_remote_state(u32 state, u32 id);
> +extern bool qcom_scm_restore_sec_cfg_available(void);
> extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
> extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
> extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
> --
> 2.21.0
>
More information about the Freedreno
mailing list