[Freedreno] [PATCH v2 2/7] drm/msm/dpu: remove phys_vid subclass

[Jeykumar Sankaran]

Not holding any video encoder specific data. Get rid of it.

Signed-off-by: Jeykumar Sankaran <jsanka at codeaurora.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 -----------
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 18 ++++--------------
 2 files changed, 4 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index acd5956..9b1efd9 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -254,17 +254,6 @@ static inline int dpu_encoder_phys_inc_pending(struct dpu_encoder_phys *phys)
 }
 
 /**
- * struct dpu_encoder_phys_vid - sub-class of dpu_encoder_phys to handle video
- *	mode specific operations
- * @base:	Baseclass physical encoder structure
- * @timing_params: Current timing parameter
- */
-struct dpu_encoder_phys_vid {
-	struct dpu_encoder_phys base;
-	struct intf_timing_params timing_params;
-};
-
-/**
  * struct dpu_encoder_phys_cmd - sub-class of dpu_encoder_phys to handle command
  *	mode specific operations
  * @base:	Baseclass physical encoder structure
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index e326395..ce65521 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -240,7 +240,6 @@ static bool dpu_encoder_phys_vid_mode_fixup(
 static void dpu_encoder_phys_vid_setup_timing_engine(
 		struct dpu_encoder_phys *phys_enc)
 {
-	struct dpu_encoder_phys_vid *vid_enc;
 	struct drm_display_mode mode;
 	struct intf_timing_params timing_params = { 0 };
 	const struct dpu_format *fmt = NULL;
@@ -254,7 +253,6 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
 	}
 
 	mode = phys_enc->cached_mode;
-	vid_enc = to_dpu_encoder_phys_vid(phys_enc);
 	if (!phys_enc->hw_intf->ops.setup_timing_gen) {
 		DPU_ERROR("timing engine setup is not supported\n");
 		return;
@@ -293,8 +291,6 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
 	spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
 
 	programmable_fetch_config(phys_enc, &timing_params);
-
-	vid_enc->timing_params = timing_params;
 }
 
 static void dpu_encoder_phys_vid_vblank_irq(void *arg, int irq_idx)
@@ -515,16 +511,13 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 
 static void dpu_encoder_phys_vid_destroy(struct dpu_encoder_phys *phys_enc)
 {
-	struct dpu_encoder_phys_vid *vid_enc;
-
 	if (!phys_enc) {
 		DPU_ERROR("invalid encoder\n");
 		return;
 	}
 
-	vid_enc = to_dpu_encoder_phys_vid(phys_enc);
 	DPU_DEBUG_VIDENC(phys_enc, "\n");
-	kfree(vid_enc);
+	kfree(phys_enc);
 }
 
 static void dpu_encoder_phys_vid_get_hw_resources(
@@ -747,7 +740,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
 		struct dpu_enc_phys_init_params *p)
 {
 	struct dpu_encoder_phys *phys_enc = NULL;
-	struct dpu_encoder_phys_vid *vid_enc = NULL;
 	struct dpu_encoder_irq *irq;
 	int i, ret = 0;
 
@@ -756,14 +748,12 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
 		goto fail;
 	}
 
-	vid_enc = kzalloc(sizeof(*vid_enc), GFP_KERNEL);
-	if (!vid_enc) {
+	phys_enc = kzalloc(sizeof(*phys_enc), GFP_KERNEL);
+	if (!phys_enc) {
 		ret = -ENOMEM;
 		goto fail;
 	}
 
-	phys_enc = &vid_enc->base;
-
 	phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
 	phys_enc->intf_idx = p->intf_idx;
 
@@ -807,7 +797,7 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
 
 fail:
 	DPU_ERROR("failed to create encoder\n");
-	if (vid_enc)
+	if (phys_enc)
 		dpu_encoder_phys_vid_destroy(phys_enc);
 
 	return ERR_PTR(ret);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project