[Freedreno] [PATCH 3/3] drm/msm/dsi: make sure we have panel or bridge earlier
Rob Clark
robdclark at gmail.com
Thu Jul 4 14:00:18 UTC 2019
On Wed, Jul 3, 2019 at 11:39 PM Andrzej Hajda <a.hajda at samsung.com> wrote:
>
> On 30.06.2019 15:14, Rob Clark wrote:
> > From: Rob Clark <robdclark at chromium.org>
> >
> > If we are going to -EPROBE_DEFER due to panel/bridge not probed yet, we
> > want to do it before we start touching hardware.
>
>
> As the evidence shows, if the driver create bus (mipi-dsi), then it
> should not defer probing due to lack of sink (panel/bridge), because the
> sink will not appear without the bus.
>
> Instead of defer probing you can defer component binding, or if you like
> challenges you can implement dynamic sink binding :)
>
I have something working that doesn't require this patch.. although it
does require CCF to export a function to check if clks are enabled so
the driver can detect if the display is already enabled. (Well, there
kind of is, __clk_is_enabled().. but currently in clk-provider.h)
So we can drop this patch.
BR,
-R
>
> Regards
>
> Andrzej
>
>
>
>
> >
> > Signed-off-by: Rob Clark <robdclark at chromium.org>
> > ---
> > drivers/gpu/drm/msm/dsi/dsi.h | 2 +-
> > drivers/gpu/drm/msm/dsi/dsi_host.c | 30 +++++++++++++--------------
> > drivers/gpu/drm/msm/dsi/dsi_manager.c | 9 +++-----
> > 3 files changed, 19 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
> > index 53bb124e8259..e15e7534ccd9 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi.h
> > +++ b/drivers/gpu/drm/msm/dsi/dsi.h
> > @@ -171,7 +171,7 @@ int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
> > struct drm_panel *msm_dsi_host_get_panel(struct mipi_dsi_host *host);
> > unsigned long msm_dsi_host_get_mode_flags(struct mipi_dsi_host *host);
> > struct drm_bridge *msm_dsi_host_get_bridge(struct mipi_dsi_host *host);
> > -int msm_dsi_host_register(struct mipi_dsi_host *host, bool check_defer);
> > +int msm_dsi_host_register(struct mipi_dsi_host *host);
> > void msm_dsi_host_unregister(struct mipi_dsi_host *host);
> > int msm_dsi_host_set_src_pll(struct mipi_dsi_host *host,
> > struct msm_dsi_pll *src_pll);
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > index 1ae2f5522979..8e5b0ba9431e 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > @@ -1824,6 +1824,20 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
> > goto fail;
> > }
> >
> > + /*
> > + * Make sure we have panel or bridge early, before we start
> > + * touching the hw. If bootloader enabled the display, we
> > + * want to be sure to keep it running until the bridge/panel
> > + * is probed and we are all ready to go. Otherwise we'll
> > + * kill the display and then -EPROBE_DEFER
> > + */
> > + if (IS_ERR(of_drm_find_panel(msm_host->device_node)) &&
> > + !of_drm_find_bridge(msm_host->device_node)) {
> > + pr_err("%s: no panel or bridge yet\n", __func__);
> > + return -EPROBE_DEFER;
> > + }
> > +
> > +
> > msm_host->ctrl_base = msm_ioremap(pdev, "dsi_ctrl", "DSI CTRL");
> > if (IS_ERR(msm_host->ctrl_base)) {
> > pr_err("%s: unable to map Dsi ctrl base\n", __func__);
> > @@ -1941,7 +1955,7 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host,
> > return 0;
> > }
> >
> > -int msm_dsi_host_register(struct mipi_dsi_host *host, bool check_defer)
> > +int msm_dsi_host_register(struct mipi_dsi_host *host)
> > {
> > struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
> > int ret;
> > @@ -1955,20 +1969,6 @@ int msm_dsi_host_register(struct mipi_dsi_host *host, bool check_defer)
> > return ret;
> >
> > msm_host->registered = true;
> > -
> > - /* If the panel driver has not been probed after host register,
> > - * we should defer the host's probe.
> > - * It makes sure panel is connected when fbcon detects
> > - * connector status and gets the proper display mode to
> > - * create framebuffer.
> > - * Don't try to defer if there is nothing connected to the dsi
> > - * output
> > - */
> > - if (check_defer && msm_host->device_node) {
> > - if (IS_ERR(of_drm_find_panel(msm_host->device_node)))
> > - if (!of_drm_find_bridge(msm_host->device_node))
> > - return -EPROBE_DEFER;
> > - }
> > }
> >
> > return 0;
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> > index ff39ce6150ad..cd3450dc3481 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> > +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> > @@ -82,7 +82,7 @@ static int dsi_mgr_setup_components(int id)
> > int ret;
> >
> > if (!IS_DUAL_DSI()) {
> > - ret = msm_dsi_host_register(msm_dsi->host, true);
> > + ret = msm_dsi_host_register(msm_dsi->host);
> > if (ret)
> > return ret;
> >
> > @@ -101,14 +101,11 @@ static int dsi_mgr_setup_components(int id)
> > /* Register slave host first, so that slave DSI device
> > * has a chance to probe, and do not block the master
> > * DSI device's probe.
> > - * Also, do not check defer for the slave host,
> > - * because only master DSI device adds the panel to global
> > - * panel list. The panel's device is the master DSI device.
> > */
> > - ret = msm_dsi_host_register(slave_link_dsi->host, false);
> > + ret = msm_dsi_host_register(slave_link_dsi->host);
> > if (ret)
> > return ret;
> > - ret = msm_dsi_host_register(master_link_dsi->host, true);
> > + ret = msm_dsi_host_register(master_link_dsi->host);
> > if (ret)
> > return ret;
> >
>
>
More information about the Freedreno
mailing list