[Freedreno] [PATCH 1/6] dt-bindings: soc: qcom: add On Chip MEMory (OCMEM) bindings

[Rob Herring]

On Sun, Jun 16, 2019 at 7:29 AM Brian Masney <masneyb at onstation.org> wrote:
>
> Add device tree bindings for the On Chip Memory (OCMEM) that is present
> on some Qualcomm Snapdragon SoCs.
>
> Signed-off-by: Brian Masney <masneyb at onstation.org>
> ---
>  .../bindings/soc/qcom/qcom,ocmem.yaml         | 66 +++++++++++++++++++

.../bindings/sram/

>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml
> new file mode 100644
> index 000000000000..5e3ae6311a16
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/qcom/qcom,ocmem.yaml#

schemas/sram/

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: On Chip Memory (OCMEM) that is present on some Qualcomm Snapdragon SoCs.
> +
> +maintainers:
> +  - Brian Masney <masneyb at onstation.org>
> +
> +description: |
> +  The On Chip Memory (OCMEM) allocator allows various clients to allocate memory

Is there something in the h/w that's an allocator? That's typically a
s/w thing that has nothing to do with h/w description.

> +  from OCMEM based on performance, latency and power requirements. This is
> +  typically used by the GPU, camera/video, and audio components on some
> +  Snapdragon SoCs.
> +
> +properties:
> +  compatible:
> +    const: qcom,ocmem-msm8974

What Bjorn said...

> +
> +  reg:
> +    items:
> +      - description: Control registers
> +      - description: OCMEM address range
> +
> +  reg-names:
> +    items:
> +      - const: ocmem_ctrl_physical
> +      - const: ocmem_physical

'ctrl' and 'mem' would be sufficient.

> +
> +  clocks:
> +    items:
> +      - description: Core clock
> +      - description: Interface clock
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: iface
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +      #include <dt-bindings/clock/qcom,rpmcc.h>
> +      #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
> +
> +      ocmem: ocmem at fdd00000 {
> +        compatible = "qcom,ocmem-msm8974";
> +
> +        reg = <0xfdd00000 0x2000>,
> +               <0xfec00000 0x180000>;
> +        reg-names = "ocmem_ctrl_physical",
> +                    "ocmem_physical";
> +
> +        clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
> +                  <&mmcc OCMEMCX_OCMEMNOC_CLK>;
> +        clock-names = "core",
> +                      "iface";
> +      };
> --
> 2.20.1
>