[Freedreno] [PATCH] drm/msm/dsi: Implement reset correctly

[Jeffrey Hugo]

On Thu, Oct 10, 2019 at 12:49 PM Sean Paul <sean at poorly.run> wrote:
>
> On Thu, Oct 10, 2019 at 2:45 PM Sean Paul <sean at poorly.run> wrote:
> >
> > On Wed, Oct 09, 2019 at 02:34:54PM -0700, Jeffrey Hugo wrote:
> > > On msm8998, vblank timeouts are observed because the DSI controller is not
> > > reset properly, which ends up stalling the MDP.  This is because the reset
> > > logic is not correct per the hardware documentation.
> > >
> > > The documentation states that after asserting reset, software should wait
> > > some time (no indication of how long), or poll the status register until it
> > > returns 0 before deasserting reset.
> > >
> > > wmb() is insufficient for this purpose since it just ensures ordering, not
> > > timing between writes.  Since asserting and deasserting reset occurs on the
> > > same register, ordering is already guaranteed by the architecture, making
> > > the wmb extraneous.
> > >
> > > Since we would define a timeout for polling the status register to avoid a
> > > possible infinite loop, lets just use a static delay of 20 ms, since 16.666
> > > ms is the time available to process one frame at 60 fps.
> > >
> > > Fixes: a689554ba6ed (drm/msm: Initial add DSI connector support)
> > > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo at gmail.com>
> > > ---
> > >
> > > Rob et al, is it possible for this to go into a 5.4-rc?
>
> Sorry, I missed this on the first go-around, I'm Ok with this getting
> into 5.4. Rob, if you're Ok with this, I can send it through -misc
> unless you're planning an msm-fixes PR.
>
> > >
> > >  drivers/gpu/drm/msm/dsi/dsi_host.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > > index 663ff9f4fac9..68ded9b4735d 100644
> > > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> > > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> > > @@ -986,7 +986,7 @@ static void dsi_sw_reset(struct msm_dsi_host *msm_host)
> > >       wmb(); /* clocks need to be enabled before reset */
> > >
> > >       dsi_write(msm_host, REG_DSI_RESET, 1);
> > > -     wmb(); /* make sure reset happen */
> > > +     msleep(20); /* make sure reset happen */
> >
> > Could you please pull this out into a #define used for both in case we decide to
> > tweak it? I don't want these 2 values to drift.
> >

Oh, yeah.  That's a really good point.  Will fix.

>
> oh yeah, and with that fixed,
>
> Reviewed-by: Sean Paul <sean at poorly.run>

Thanks.

>
> > Thanks,
> > Sean
> >
> > >       dsi_write(msm_host, REG_DSI_RESET, 0);
> > >  }
> > >
> > > @@ -1396,7 +1396,7 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host)
> > >
> > >       /* dsi controller can only be reset while clocks are running */
> > >       dsi_write(msm_host, REG_DSI_RESET, 1);
> > > -     wmb();  /* make sure reset happen */
> > > +     msleep(20);     /* make sure reset happen */
> > >       dsi_write(msm_host, REG_DSI_RESET, 0);
> > >       wmb();  /* controller out of reset */
> > >       dsi_write(msm_host, REG_DSI_CTRL, data0);
> > > --
> > > 2.17.1
> > >
> >
> > --
> > Sean Paul, Software Engineer, Google / Chromium OS