[Freedreno] [PATCH 08/10] drm/msm: async commit support
Sean Paul
sean at poorly.run
Tue Sep 3 20:51:49 UTC 2019
On Thu, Aug 29, 2019 at 09:45:16AM -0700, Rob Clark wrote:
> From: Rob Clark <robdclark at chromium.org>
>
> Now that flush/wait/complete is decoupled from the "synchronous" part of
> atomic commit_tail(), add support to defer flush to a timer that expires
> shortly before vblank for async commits. In this way, multiple atomic
> commits (for example, cursor updates) can be coalesced into a single
> flush at the end of the frame.
>
> v2: don't hold lock over ->wait_flush(), to avoid locking interaction
> that was causing fps drop when combining page flips or non-async
> atomic commits and lots of legacy cursor updates
>
> Signed-off-by: Rob Clark <robdclark at chromium.org>
Some nits, with them addressed,
Reviewed-by: Sean Paul <sean at poorly.run>
> ---
> drivers/gpu/drm/msm/msm_atomic.c | 156 ++++++++++++++++++++++++++++++-
> drivers/gpu/drm/msm/msm_drv.c | 1 +
> drivers/gpu/drm/msm/msm_drv.h | 4 +
> drivers/gpu/drm/msm/msm_kms.h | 50 ++++++++++
> 4 files changed, 210 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
> index 614fb9c5bb58..8f8f74337cb4 100644
> --- a/drivers/gpu/drm/msm/msm_atomic.c
> +++ b/drivers/gpu/drm/msm/msm_atomic.c
> @@ -29,6 +29,95 @@ int msm_atomic_prepare_fb(struct drm_plane *plane,
> return msm_framebuffer_prepare(new_state->fb, kms->aspace);
> }
>
> +static void msm_atomic_async_commit(struct msm_kms *kms, int crtc_idx)
> +{
> + unsigned crtc_mask = BIT(crtc_idx);
> +
> + mutex_lock(&kms->commit_lock);
> +
> + if (!(kms->pending_crtc_mask & crtc_mask)) {
> + mutex_unlock(&kms->commit_lock);
> + return;
> + }
> +
> + kms->pending_crtc_mask &= ~crtc_mask;
> +
> + kms->funcs->enable_commit(kms);
> +
> + /*
> + * Flush hardware updates:
> + */
> + DRM_DEBUG_ATOMIC("triggering async commit\n");
> + kms->funcs->flush_commit(kms, crtc_mask);
> + mutex_unlock(&kms->commit_lock);
> +
> + /*
> + * Wait for flush to complete:
> + */
> + kms->funcs->wait_flush(kms, crtc_mask);
> +
> + mutex_lock(&kms->commit_lock);
> + kms->funcs->complete_commit(kms, crtc_mask);
> + mutex_unlock(&kms->commit_lock);
> + kms->funcs->disable_commit(kms);
> +}
> +
> +static enum hrtimer_restart msm_atomic_pending_timer(struct hrtimer *t)
> +{
> + struct msm_pending_timer *timer = container_of(t,
> + struct msm_pending_timer, timer);
> + struct msm_drm_private *priv = timer->kms->dev->dev_private;
> +
As discussed on IRC, a TODO here explaining that we'd like to remove this worker eventually but there are mutexes further down that need to be removed.
> + queue_work(priv->wq, &timer->work);
> +
> + return HRTIMER_NORESTART;
> +}
> +
> +static void msm_atomic_pending_work(struct work_struct *work)
> +{
> + struct msm_pending_timer *timer = container_of(work,
> + struct msm_pending_timer, work);
> +
> + msm_atomic_async_commit(timer->kms, timer->crtc_idx);
> +}
> +
> +void msm_atomic_init_pending_timer(struct msm_pending_timer *timer,
> + struct msm_kms *kms, int crtc_idx)
> +{
> + timer->kms = kms;
> + timer->crtc_idx = crtc_idx;
> + hrtimer_init(&timer->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
> + timer->timer.function = msm_atomic_pending_timer;
> + INIT_WORK(&timer->work, msm_atomic_pending_work);
> +}
> +
> +static bool can_do_async(struct drm_atomic_state *state,
> + struct drm_crtc **async_crtc)
> +{
> + struct drm_connector_state *connector_state;
> + struct drm_connector *connector;
> + struct drm_crtc_state *crtc_state;
> + struct drm_crtc *crtc;
> + int i, num_crtcs = 0;
> +
> + if (!(state->legacy_cursor_update || state->async_update))
> + return false;
> +
> + /* any connector change, means slow path: */
> + for_each_new_connector_in_state(state, connector, connector_state, i)
> + return false;
> +
> + for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
> + if (drm_atomic_crtc_needs_modeset(crtc_state))
> + return false;
> + if (++num_crtcs > 1)
> + return false;
> + *async_crtc = crtc;
> + }
> +
> + return true;
> +}
> +
> /* Get bitmask of crtcs that will need to be flushed. The bitmask
> * can be used with for_each_crtc_mask() iterator, to iterate
> * effected crtcs without needing to preserve the atomic state.
> @@ -50,9 +139,25 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
> struct drm_device *dev = state->dev;
> struct msm_drm_private *priv = dev->dev_private;
> struct msm_kms *kms = priv->kms;
> + struct drm_crtc *async_crtc = NULL;
> unsigned crtc_mask = get_crtc_mask(state);
> + bool async = kms->funcs->vsync_time &&
> + can_do_async(state, &async_crtc);
>
> kms->funcs->enable_commit(kms);
> +
> + /*
> + * Ensure any previous (potentially async) commit has
> + * completed:
> + */
> + kms->funcs->wait_flush(kms, crtc_mask);
> +
> + mutex_lock(&kms->commit_lock);
> +
> + /*
> + * Now that there is no in-progress flush is complete,
s/is complete//
> + * prepare the current update:
> + */
> kms->funcs->prepare_commit(kms, state);
>
> /*
> @@ -62,6 +167,49 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
> drm_atomic_helper_commit_planes(dev, state, 0);
> drm_atomic_helper_commit_modeset_enables(dev, state);
>
> + if (async) {
> + struct msm_pending_timer *timer =
> + &kms->pending_timers[drm_crtc_index(async_crtc)];
> +
> + /* async updates are limited to single-crtc updates: */
> + WARN_ON(crtc_mask != drm_crtc_mask(async_crtc));
Put this in can_do_async()?
> +
> + /*
> + * Start timer if we don't already have an update pending
> + * on this crtc:
> + */
> + if (!(kms->pending_crtc_mask & crtc_mask)) {
> + ktime_t vsync_time, wakeup_time;
> +
> + kms->pending_crtc_mask |= crtc_mask;
> +
> + vsync_time = kms->funcs->vsync_time(kms, async_crtc);
> + wakeup_time = ktime_sub(vsync_time, ms_to_ktime(1));
> +
> + hrtimer_start(&timer->timer, wakeup_time,
> + HRTIMER_MODE_ABS);
> + }
> +
> + kms->funcs->disable_commit(kms);
enable and disable are pretty loaded. How about begin/end instead?
> + mutex_unlock(&kms->commit_lock);
> +
> + /*
> + * At this point, from drm core's perspective, we
> + * are done with the atomic update, so we can just
> + * go ahead and signal that it is done:
> + */
> + drm_atomic_helper_commit_hw_done(state);
> + drm_atomic_helper_cleanup_planes(dev, state);
> +
> + return;
> + }
> +
> + /*
> + * If there is any async flush pending on updated crtcs, fold
> + * them into the current flush.
> + */
> + kms->pending_crtc_mask &= ~crtc_mask;
> +
> /*
> * Flush hardware updates:
> */
> @@ -70,12 +218,18 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
> kms->funcs->commit(kms, state);
> }
> kms->funcs->flush_commit(kms, crtc_mask);
> + mutex_unlock(&kms->commit_lock);
>
> + /*
> + * Wait for flush to complete:
> + */
> kms->funcs->wait_flush(kms, crtc_mask);
> +
> + mutex_lock(&kms->commit_lock);
> kms->funcs->complete_commit(kms, crtc_mask);
> + mutex_unlock(&kms->commit_lock);
> kms->funcs->disable_commit(kms);
>
> drm_atomic_helper_commit_hw_done(state);
> -
> drm_atomic_helper_cleanup_planes(dev, state);
> }
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index 336a6d0a4cd3..65262a993440 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -532,6 +532,7 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
> ddev->mode_config.normalize_zpos = true;
>
> if (kms) {
> + kms->dev = ddev;
> ret = kms->funcs->hw_init(kms);
> if (ret) {
> DRM_DEV_ERROR(dev, "kms hw init failed: %d\n", ret);
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index 79d480a7d97d..7d164d5c18b4 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -222,8 +222,12 @@ struct msm_format {
> uint32_t pixel_format;
> };
>
> +struct msm_pending_timer;
> +
> int msm_atomic_prepare_fb(struct drm_plane *plane,
> struct drm_plane_state *new_state);
> +void msm_atomic_init_pending_timer(struct msm_pending_timer *timer,
> + struct msm_kms *kms, int crtc_idx);
> void msm_atomic_commit_tail(struct drm_atomic_state *state);
> struct drm_atomic_state *msm_atomic_state_alloc(struct drm_device *dev);
> void msm_atomic_state_clear(struct drm_atomic_state *state);
> diff --git a/drivers/gpu/drm/msm/msm_kms.h b/drivers/gpu/drm/msm/msm_kms.h
> index 811f5e2c2405..5eafc9686d29 100644
> --- a/drivers/gpu/drm/msm/msm_kms.h
> +++ b/drivers/gpu/drm/msm/msm_kms.h
> @@ -33,6 +33,20 @@ struct msm_kms_funcs {
>
> /*
> * Atomic commit handling:
> + *
> + * Note that in the case of async commits, the funcs which take
> + * a crtc_mask (ie. ->flush_commit(), and ->complete_commit())
> + * might not be evenly balanced with ->prepare_commit(), however
> + * each crtc that effected by a ->perpare_commit() (potentially
s/perpare/prepare/
> + * multiple times) will eventually (at end of vsync period) be
> + * flushed and completed.
> + *
> + * This has some implications about tracking of cleanup state,
> + * for example SMP blocks to release after commit completes. Ie.
> + * cleanup state should be also duplicated in the various
> + * duplicate_state() methods, as the current cleanup state at
> + * ->complete_commit() time may have accumulated cleanup work
> + * from multiple commits.
> */
>
> /**
> @@ -45,6 +59,14 @@ struct msm_kms_funcs {
> void (*enable_commit)(struct msm_kms *kms);
> void (*disable_commit)(struct msm_kms *kms);
>
> + /**
> + * If the kms backend supports async commit, it should implement
> + * this method to return the time of the next vsync. This is
> + * used to determine a time slightly before vsync, for the async
> + * commit timer to run and complete an async commit.
> + */
> + ktime_t (*vsync_time)(struct msm_kms *kms, struct drm_crtc *crtc);
> +
> /**
> * Prepare for atomic commit. This is called after any previous
> * (async or otherwise) commit has completed.
> @@ -109,20 +131,48 @@ struct msm_kms_funcs {
> #endif
> };
>
> +struct msm_kms;
> +
> +/*
> + * A per-crtc timer for pending async atomic flushes. Scheduled to expire
> + * shortly before vblank to flush pending async updates.
> + */
> +struct msm_pending_timer {
> + struct hrtimer timer;
> + struct work_struct work;
> + struct msm_kms *kms;
> + unsigned crtc_idx;
> +};
> +
> struct msm_kms {
> const struct msm_kms_funcs *funcs;
> + struct drm_device *dev;
>
> /* irq number to be passed on to drm_irq_install */
> int irq;
>
> /* mapper-id used to request GEM buffer mapped for scanout: */
> struct msm_gem_address_space *aspace;
> +
> + /*
> + * For async commit, where ->flush_commit() and later happens
> + * from the crtc's pending_timer close to end of the frame:
> + */
> + struct mutex commit_lock;
> + unsigned pending_crtc_mask;
> + struct msm_pending_timer pending_timers[MAX_CRTCS];
> };
>
> static inline void msm_kms_init(struct msm_kms *kms,
> const struct msm_kms_funcs *funcs)
> {
> + unsigned i;
> +
> + mutex_init(&kms->commit_lock);
> kms->funcs = funcs;
> +
> + for (i = 0; i < ARRAY_SIZE(kms->pending_timers); i++)
> + msm_atomic_init_pending_timer(&kms->pending_timers[i], kms, i);
> }
>
> struct msm_kms *mdp4_kms_init(struct drm_device *dev);
> --
> 2.21.0
>
--
Sean Paul, Software Engineer, Google / Chromium OS
More information about the Freedreno
mailing list