[Freedreno] [PATCH 00/11] of: Fix DMA configuration for non-DT masters

Robin Murphy robin.murphy at arm.com
Wed Sep 25 15:09:12 UTC 2019


On 25/09/2019 15:52, Nicolas Saenz Julienne wrote:
> On Tue, 2019-09-24 at 16:59 -0500, Rob Herring wrote:
>> On Tue, Sep 24, 2019 at 1:12 PM Nicolas Saenz Julienne
>> <nsaenzjulienne at suse.de> wrote:
>>> Hi All,
>>> this series tries to address one of the issues blocking us from
>>> upstreaming Broadcom's STB PCIe controller[1]. Namely, the fact that
>>> devices not represented in DT which sit behind a PCI bus fail to get the
>>> bus' DMA addressing constraints.
>>>
>>> This is due to the fact that of_dma_configure() assumes it's receiving a
>>> DT node representing the device being configured, as opposed to the PCIe
>>> bridge node we currently pass. This causes the code to directly jump
>>> into PCI's parent node when checking for 'dma-ranges' and misses
>>> whatever was set there.
>>>
>>> To address this I create a new API in OF - inspired from Robin Murphys
>>> original proposal[2] - which accepts a bus DT node as it's input in
>>> order to configure a device's DMA constraints. The changes go deep into
>>> of/address.c's implementation, as a device being having a DT node
>>> assumption was pretty strong.
>>>
>>> On top of this work, I also cleaned up of_dma_configure() removing its
>>> redundant arguments and creating an alternative function for the special
>>> cases
>>> not applicable to either the above case or the default usage.
>>>
>>> IMO the resulting functions are more explicit. They will probably
>>> surface some hacky usages that can be properly fixed as I show with the
>>> DT fixes on the Layerscape platform.
>>>
>>> This was also tested on a Raspberry Pi 4 with a custom PCIe driver and
>>> on a Seattle AMD board.
>>
>> Humm, I've been working on this issue too. Looks similar though yours
>> has a lot more churn and there's some other bugs I've found.
> 
> That's good news, and yes now that I see it, some stuff on my series is overly
> complicated. Specially around of_translate_*().
> 
> On top of that, you removed in of_dma_get_range():
> 
> -	/*
> -	 * At least empty ranges has to be defined for parent node if
> -	 * DMA is supported
> -	 */
> -	if (!ranges)
> -		break;
> 
> Which I assumed was bound to the standard and makes things easier.
> 
>> Can you test out this branch[1]. I don't have any h/w needing this,
>> but wrote a unittest and tested with modified QEMU.
> 
> I reviewed everything, I did find a minor issue, see the patch attached.

WRT that patch, the original intent of "force_dma" was purely to 
consider a device DMA-capable regardless of the presence of 
"dma-ranges". Expecting of_dma_configure() to do anything for a non-OF 
device has always been bogus - magic paravirt devices which appear out 
of nowhere and expect to be treated as genuine DMA masters are a 
separate problem that we haven't really approached yet.

Robin.


More information about the Freedreno mailing list