[Freedreno] [v5] arm64: dts: sc7180: add display dt nodes

[Harigovindan P]

Add display, DSI hardware DT nodes for sc7180.

Co-developed-by: Kalyan Thota <kalyan_t at codeaurora.org>
Signed-off-by: Kalyan Thota <kalyan_t at codeaurora.org>
Signed-off-by: Harigovindan P <harigovi at codeaurora.org>
---

Changes in v1:
        - Added display DT nodes for sc7180
Changes in v2:
        - Renamed node names
        - Corrected code alignments
        - Removed extra new line
        - Added DISP AHB clock for register access
          under display_subsystem node for global settings
Changes in v3:
        - Modified node names
        - Modified hard coded values
        - Removed mdss reg entry
Changes in v4:
        - Reverting mdp node name
        - Setting status to disabled in main SOC dtsi file
        - Replacing _ to - for node names
        - Adding clock dependency patch link
        - Splitting idp dt file to a separate patch
Changes in v5:
        - Renaming "gcc_bus" to "bus" as per bindings (Doug Anderson)
        - Making status as disabled for mdss and mdss_mdp by default (Doug Anderson)
        - Removing "disp_cc" register space (Doug Anderson)
        - Renaming "dsi_controller" to "dsi" as per bindings (Doug Anderson)
        - Providing "ref" clk for dsi_phy (Doug Anderson)
        - Sorting mdss node before dispcc (Doug Anderson)

This patch has dependency on the below series
https://lkml.org/lkml/2019/12/27/73

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 136 ++++++++++++++++++++++++++++++++++-
 1 file changed, 134 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index bd2584d..3ac1b87 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1173,13 +1173,145 @@
 			#power-domain-cells = <1>;
 		};
 
+		mdss: mdss at ae00000 {
+			compatible = "qcom,sc7180-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "ahb", "core";
+
+			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			assigned-clock-rates = <300000000>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: mdp at ae01000 {
+				compatible = "qcom,sc7180-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "rot", "lut", "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+						       <19200000>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi at ae94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				phys = <&dsi_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port at 1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi_phy: dsi-phy at ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
 		dispcc: clock-controller at af00000 {
 			compatible = "qcom,sc7180-dispcc";
 			reg = <0 0x0af00000 0 0x200000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <0>,
-				 <1>,
+				 <&dsi_phy 0>,
+				 <&dsi_phy 1>,
 				 <0>,
 				 <0>;
 			clock-names = "xo", "gpll0",
-- 
2.7.4