[Freedreno] [PATCH] drm: msm: a6xx: fix gpu failure after system resume
Akhil P Oommen
akhilpo at codeaurora.org
Tue Jul 14 13:25:30 UTC 2020
On targets where GMU is available, GMU takes over the ownership of GX GDSC
during its initialization. So, take a refcount on the GX PD on behalf of
GMU before we initialize it. This makes sure that nobody can collapse the
GX GDSC once GMU owns the GX GDSC. This patch fixes some weird failures
during GPU wake up during system resume.
Signed-off-by: Akhil P Oommen <akhilpo at codeaurora.org>
---
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index a6f43ff..5b2df7d 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -873,10 +873,19 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
/* Turn on the resources */
pm_runtime_get_sync(gmu->dev);
+ /*
+ * "enable" the GX power domain which won't actually do anything but it
+ * will make sure that the refcounting is correct in case we need to
+ * bring down the GX after a GMU failure
+ */
+ if (!IS_ERR_OR_NULL(gmu->gxpd))
+ pm_runtime_get_sync(gmu->gxpd);
+
/* Use a known rate to bring up the GMU */
clk_set_rate(gmu->core_clk, 200000000);
ret = clk_bulk_prepare_enable(gmu->nr_clocks, gmu->clocks);
if (ret) {
+ pm_runtime_put(gmu->gxpd);
pm_runtime_put(gmu->dev);
return ret;
}
@@ -919,19 +928,12 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
/* Set the GPU to the current freq */
a6xx_gmu_set_initial_freq(gpu, gmu);
- /*
- * "enable" the GX power domain which won't actually do anything but it
- * will make sure that the refcounting is correct in case we need to
- * bring down the GX after a GMU failure
- */
- if (!IS_ERR_OR_NULL(gmu->gxpd))
- pm_runtime_get(gmu->gxpd);
-
out:
/* On failure, shut down the GMU to leave it in a good state */
if (ret) {
disable_irq(gmu->gmu_irq);
a6xx_rpmh_stop(gmu);
+ pm_runtime_put(gmu->gxpd);
pm_runtime_put(gmu->dev);
}
--
2.7.4
More information about the Freedreno
mailing list