[Freedreno] [v1] dt-bindings: msm: disp: add yaml schemas for DPU and DSI bindings

[Sam Ravnborg]

Hi Krishna.

Thanks for these bindings files.

On Fri, Mar 06, 2020 at 05:06:00PM +0530, Krishna Manikandan wrote:
> MSM Mobile Display Subsytem(MDSS) encapsulates sub-blocks
> like DPU display controller, DSI etc. Add YAML schema
> for the device tree bindings for the same.
> 
> Signed-off-by: Krishna Manikandan <mkrishn at codeaurora.org>
> ---
>  .../bindings/display/msm/dpu-sc7180.yaml           | 269 +++++++++++++++
>  .../bindings/display/msm/dpu-sdm845.yaml           | 265 +++++++++++++++
>  .../bindings/display/msm/dsi-sc7180.yaml           | 369 +++++++++++++++++++++
>  .../bindings/display/msm/dsi-sdm845.yaml           | 369 +++++++++++++++++++++
>  4 files changed, 1272 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
> new file mode 100644
> index 0000000..3d1d9b8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
> @@ -0,0 +1,269 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Description of Qualcomm Display Dpu dt properties.

Try to be cossistent in capitilization of Dpu versus DPU

> +
> +maintainers:
> + - Krishna Manikandan <mkrishn at codeaurora.org>
> +
> +description: |
> + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates
> + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
> + bindings of MDSS and DPU are mentioned for SC7180 target.

Bindings should use an indent of two spaces.
This is what is used in the example schema and the de-facto standard.
One space indent makes it very hard to follow the indent.

For examples the indent varies. From 2 spaces to 8 spaces.
I often use 4 spaces as 2 spaces is not enough when it spans several
lines. But there is nothing fixed there.

> +
> +properties:
> + "mdss":
> +  type: object
> +  description: |
> +   Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP
> +   interfaces.
> +
> +  properties:
> +   compatible:
> +    items:
> +     - const: qcom,sc7180-mdss
> +   reg:
> +    description: |
> +     Physical base address and length of controller's registers.
Add empty line between properties (empty line before reg:).

> +
> +   reg-names:
> +    description: |
> +     Names for different register regions defined above. The required region
> +     is mentioned below.
> +    items:
> +     - const: mdss
> +
> +   power-domains:
> +    description: |
> +     A power domain consumer specifier according to
> +     Documentation/devicetree/bindings/power/power_domain.txt.
Should this be power-domain.yaml?


> +
> +   clocks:
> +    description: |
> +     List of clock specifiers for clocks needed by the device.
Do not use "|" unless required. Fine to have text on same line as
description: .


	Sam