[Freedreno] [PATCH 2/6] arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp

[Matthias Kaehlcke]

On Thu, May 14, 2020 at 04:24:15PM +0530, Sharat Masetty wrote:

> Subject: arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp

nit: s/opp/OPPs/

>
> Add opp-peak-kBps bindings to the GPU opp table, listing the peak
> GPU -> DDR bandwidth requirement for each opp level. This will be
> used to scale the DDR bandwidth along with the GPU frequency dynamically.
> 
> Signed-off-by: Sharat Masetty <smasetty at codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 0ce9921..89f7767 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1392,36 +1392,43 @@
>  				opp-800000000 {
>  					opp-hz = /bits/ 64 <800000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> +					opp-peak-kBps = <8532000>;
>  				};
> 
>  				opp-650000000 {
>  					opp-hz = /bits/ 64 <650000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> +					opp-peak-kBps = <7216000>;
>  				};
> 
>  				opp-565000000 {
>  					opp-hz = /bits/ 64 <565000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> +					opp-peak-kBps = <5412000>;
>  				};
> 
>  				opp-430000000 {
>  					opp-hz = /bits/ 64 <430000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +					opp-peak-kBps = <5412000>;

I suppose it's intentional that the bandwidth is the same as for opp-565000000,
just want to mention it for if it's a C&P error.


>  				};
> 
>  				opp-355000000 {
>  					opp-hz = /bits/ 64 <355000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> +					opp-peak-kBps = <3072000>;
>  				};
> 
>  				opp-267000000 {
>  					opp-hz = /bits/ 64 <267000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> +					opp-peak-kBps = <3072000>;
>  				};

ditto

>  				opp-180000000 {
>  					opp-hz = /bits/ 64 <180000000>;
>  					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> +					opp-peak-kBps = <1804000>;
>  				};
>  			};
>  		};

assuming the repeated bandwidths are indeed intentional:

Reviewed-by: Matthias Kaehlcke <mka at chromium.org>