[Freedreno] [PATCH 8/8] drm/msm/dpu: add SM8250 to hw catalog
Jonathan Marek
jonathan at marek.ca
Tue May 26 03:22:15 UTC 2020
This brings up basic video mode functionality for SM8250 DPU. Command mode
and dual mixer/intf configurations are not working, future patches will
address this. Scaler functionality and multiple planes is also untested.
Signed-off-by: Jonathan Marek <jonathan at marek.ca>
---
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 106 ++++++++++++++++++
.../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 3 +
2 files changed, 109 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index f99622870676..711ec1e6a543 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -107,6 +107,21 @@ static const struct dpu_caps sm8150_dpu_caps = {
.max_vdeci_exp = MAX_VERT_DECIMATION,
};
+static const struct dpu_caps sm8250_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0xb,
+ .max_linewidth = 4096,
+ .qseed_type = DPU_SSPP_SCALER_QSEED3, /* TODO: qseed3 lite */
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2_5,
+ .ubwc_version = DPU_HW_UBWC_VER_40,
+ .has_src_split = true,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+ .has_3d_merge = true,
+ .max_linewidth = 4096,
+ .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
static const struct dpu_mdp_cfg sdm845_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -149,6 +164,33 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
},
};
+static const struct dpu_mdp_cfg sm8250_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x45C,
+ .features = 0,
+ .highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+ .reg_off = 0x2AC, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
+ .reg_off = 0x2B4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
+ .reg_off = 0x2BC, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
+ .reg_off = 0x2C4, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+ .reg_off = 0x2AC, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
+ .reg_off = 0x2B4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
+ .reg_off = 0x2BC, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
+ .reg_off = 0x2C4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_REG_DMA] = {
+ .reg_off = 0x2BC, .bit_off = 20},
+ },
+};
+
/*************************************************************
* CTL sub blocks config
*************************************************************/
@@ -519,6 +561,14 @@ static const struct dpu_reg_dma_cfg sm8150_regdma = {
.base = 0x0, .version = 0x00010001, .trigger_sel_off = 0x119c
};
+static const struct dpu_reg_dma_cfg sm8250_regdma = {
+ .base = 0x0,
+ .version = 0x00010002,
+ .trigger_sel_off = 0x119c,
+ .xin_id = 7,
+ .clk_ctrl = DPU_CLK_CTRL_REG_DMA,
+};
+
/*************************************************************
* PERF data config
*************************************************************/
@@ -656,6 +706,31 @@ static const struct dpu_perf_cfg sm8150_perf_data = {
},
};
+static const struct dpu_perf_cfg sm8250_perf_data = {
+ .max_bw_low = 13700000,
+ .max_bw_high = 16600000,
+ .min_core_ib = 4800000,
+ .min_llcc_ib = 0,
+ .min_dram_ib = 800000,
+ .danger_lut_tbl = {0xf, 0xffff, 0x0},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sc7180_qos_linear),
+ .entries = sc7180_qos_linear
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ /* TODO: macrotile-qseed is different from macrotile */
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+};
+
/*************************************************************
* Hardware catalog init
*************************************************************/
@@ -747,11 +822,42 @@ static void sm8150_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
};
}
+/*
+ * sm8250_cfg_init(): populate sm8250 dpu sub-blocks reg offsets
+ * and instance counts.
+ */
+static void sm8250_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
+{
+ *dpu_cfg = (struct dpu_mdss_cfg){
+ .caps = &sm8250_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sm8250_mdp),
+ .mdp = sm8250_mdp,
+ .ctl_count = ARRAY_SIZE(sm8150_ctl),
+ .ctl = sm8150_ctl,
+ /* TODO: sspp qseed version differs from 845 */
+ .sspp_count = ARRAY_SIZE(sdm845_sspp),
+ .sspp = sdm845_sspp,
+ .mixer_count = ARRAY_SIZE(sm8150_lm),
+ .mixer = sm8150_lm,
+ .pingpong_count = ARRAY_SIZE(sm8150_pp),
+ .pingpong = sm8150_pp,
+ .intf_count = ARRAY_SIZE(sm8150_intf),
+ .intf = sm8150_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .reg_dma_count = 1,
+ .dma_cfg = sm8250_regdma,
+ .perf = sm8250_perf_data,
+ .mdss_irqs = 0xff,
+ };
+}
+
static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init},
{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
{ .hw_rev = DPU_HW_VER_500, .cfg_init = sm8150_cfg_init},
{ .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
+ { .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
{ .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
};
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 31ddb2be9c57..cdd200194c4f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -408,6 +408,7 @@ enum dpu_clk_ctrl_type {
DPU_CLK_CTRL_CURSOR0,
DPU_CLK_CTRL_CURSOR1,
DPU_CLK_CTRL_INLINE_ROT0_SSPP,
+ DPU_CLK_CTRL_REG_DMA,
DPU_CLK_CTRL_MAX,
};
@@ -577,6 +578,8 @@ struct dpu_reg_dma_cfg {
DPU_HW_BLK_INFO;
u32 version;
u32 trigger_sel_off;
+ u32 xin_id;
+ enum dpu_clk_ctrl_type clk_ctrl;
};
/**
--
2.26.1
More information about the Freedreno
mailing list