[Freedreno] [PATCH] drm/msm/dp: fixes wrong connection state caused by failure of link train

[khsieh at codeaurora.org]

On 2020-10-02 19:12, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2020-10-02 15:09:19)
>> Connection state is set incorrectly happen at either failure of link 
>> train
>> or cable plugged in while suspended. This patch fixes these problems.
>> This patch also replace ST_SUSPEND_PENDING with ST_DISPLAY_OFF.
>> 
>> Signed-off-by: Kuogee Hsieh <khsieh at codeaurora.org>
> 
> Any Fixes: tag?
> 
>> ---
>>  drivers/gpu/drm/msm/dp/dp_display.c | 52 
>> ++++++++++++++---------------
>>  drivers/gpu/drm/msm/dp/dp_panel.c   |  5 +++
>>  2 files changed, 31 insertions(+), 26 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c 
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> index 431dff9de797..898c6cc1643a 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -340,8 +340,6 @@ static int dp_display_process_hpd_high(struct 
>> dp_display_private *dp)
>>         }
>> 
>>         dp_add_event(dp, EV_USER_NOTIFICATION, true, 0);
>> -
>> -
>>  end:
>>         return rc;
>>  }
> 
> Not sure we need this hunk
> 
>> @@ -1186,19 +1180,19 @@ static int dp_pm_resume(struct device *dev)
>> 
>>         dp = container_of(dp_display, struct dp_display_private, 
>> dp_display);
>> 
>> +       /* start from dis connection state */
> 
> disconnection? Or disconnected state?
> 
>> +       atomic_set(&dp->hpd_state, ST_DISCONNECTED);
>> +
>>         dp_display_host_init(dp);
>> 
>>         dp_catalog_ctrl_hpd_config(dp->catalog);
>> 
>>         status = dp_catalog_hpd_get_state_status(dp->catalog);
>> 
>> -       if (status) {
>> +       if (status)
>>                 dp->dp_display.is_connected = true;
>> -       } else {
>> +       else
>>                 dp->dp_display.is_connected = false;
>> -               /* make sure next resume host_init be called */
>> -               dp->core_initialized = false;
>> -       }
>> 
>>         return 0;
>>  }
>> @@ -1214,6 +1208,9 @@ static int dp_pm_suspend(struct device *dev)
>>         if (dp_display->power_on == true)
>>                 dp_display_disable(dp, 0);
>> 
>> +       /* host_init will be called at pm_resume */
>> +       dp->core_initialized = false;
>> +
>>         atomic_set(&dp->hpd_state, ST_SUSPENDED);
>> 
>>         return 0;
>> @@ -1343,6 +1340,9 @@ int msm_dp_display_enable(struct msm_dp *dp, 
>> struct drm_encoder *encoder)
>> 
>>         mutex_lock(&dp_display->event_mutex);
>> 
>> +       /* delete sentinel checking */
> 
> Stop sentinel checking?
> 
>> +       dp_del_event(dp_display, EV_CONNECT_PENDING_TIMEOUT);
>> +
>>         rc = dp_display_set_mode(dp, &dp_display->dp_mode);
>>         if (rc) {
>>                 DRM_ERROR("Failed to perform a mode set, rc=%d\n", 
>> rc);
>> @@ -1368,9 +1368,8 @@ int msm_dp_display_enable(struct msm_dp *dp, 
>> struct drm_encoder *encoder)
>>                 dp_display_unprepare(dp);
>>         }
>> 
>> -       dp_del_event(dp_display, EV_CONNECT_PENDING_TIMEOUT);
>> -
>> -       if (state == ST_SUSPEND_PENDING)
>> +       /* manual kick off plug event to train link */
>> +       if (state == ST_DISPLAY_OFF)
>>                 dp_add_event(dp_display, EV_IRQ_HPD_INT, 0, 0);
>> 
>>         /* completed connection */
>> @@ -1402,20 +1401,21 @@ int msm_dp_display_disable(struct msm_dp *dp, 
>> struct drm_encoder *encoder)
>> 
>>         mutex_lock(&dp_display->event_mutex);
>> 
>> +       /* delete sentinel checking */
> 
> Stop sentinel checking?
> 
>> +       dp_del_event(dp_display, EV_DISCONNECT_PENDING_TIMEOUT);
>> +
>>         dp_display_disable(dp_display, 0);
>> 
>>         rc = dp_display_unprepare(dp);
>>         if (rc)
>>                 DRM_ERROR("DP display unprepare failed, rc=%d\n", rc);
>> 
>> -       dp_del_event(dp_display, EV_DISCONNECT_PENDING_TIMEOUT);
>> -
>>         state =  atomic_read(&dp_display->hpd_state);
>>         if (state == ST_DISCONNECT_PENDING) {
> 
> I don't understand the atomic nature of this hpd_state variable. Why is
> it an atomic variable? Is taking a spinlock bad? What is to prevent the
> atomic read here to not be interrupted and then this if condition check
> be invalid because the variable has been updated somewhere else?
hpd_state variable updated by multiple threads. however it was protected 
by mutex.
in theory, it should also work as u32. since it was declared as atomic 
from beginning
and it does not cause any negative effects, can we keep it as it is?

>>                 /* completed disconnection */
>>                 atomic_set(&dp_display->hpd_state, ST_DISCONNECTED);
>>         } else {
>> -               atomic_set(&dp_display->hpd_state, 
>> ST_SUSPEND_PENDING);
>> +               atomic_set(&dp_display->hpd_state, ST_DISPLAY_OFF);