[Freedreno] [v2] drm/msm: Fix race condition in msm driver with async layer updates
Rob Clark
robdclark at gmail.com
Thu Oct 15 15:15:31 UTC 2020
On Thu, Oct 15, 2020 at 2:15 AM Krishna Manikandan
<mkrishn at codeaurora.org> wrote:
>
> When there are back to back commits with async cursor update,
> there is a case where second commit can program the DPU hw
> blocks while first didn't complete flushing config to HW.
>
> Synchronize the compositions such that second commit waits
> until first commit flushes the composition.
>
> This change also introduces per crtc commit lock, such that
> commits on different crtcs are not blocked by each other.
>
> Changes in v2:
> - Use an array of mutexes in kms to handle commit
> lock per crtc. (Rob Clark)
>
> Signed-off-by: Krishna Manikandan <mkrishn at codeaurora.org>
> ---
> drivers/gpu/drm/msm/msm_atomic.c | 32 +++++++++++++++++++-------------
> drivers/gpu/drm/msm/msm_kms.h | 6 ++++--
> 2 files changed, 23 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/msm_atomic.c b/drivers/gpu/drm/msm/msm_atomic.c
> index 561bfa4..f9bd472 100644
> --- a/drivers/gpu/drm/msm/msm_atomic.c
> +++ b/drivers/gpu/drm/msm/msm_atomic.c
> @@ -61,10 +61,10 @@ static void msm_atomic_async_commit(struct msm_kms *kms, int crtc_idx)
>
> trace_msm_atomic_async_commit_start(crtc_mask);
>
> - mutex_lock(&kms->commit_lock);
> + mutex_lock(&kms->commit_lock[crtc_idx]);
>
> if (!(kms->pending_crtc_mask & crtc_mask)) {
> - mutex_unlock(&kms->commit_lock);
> + mutex_unlock(&kms->commit_lock[crtc_idx]);
> goto out;
> }
>
> @@ -79,7 +79,6 @@ static void msm_atomic_async_commit(struct msm_kms *kms, int crtc_idx)
> */
> trace_msm_atomic_flush_commit(crtc_mask);
> kms->funcs->flush_commit(kms, crtc_mask);
> - mutex_unlock(&kms->commit_lock);
>
> /*
> * Wait for flush to complete:
> @@ -90,9 +89,8 @@ static void msm_atomic_async_commit(struct msm_kms *kms, int crtc_idx)
>
> vblank_put(kms, crtc_mask);
>
> - mutex_lock(&kms->commit_lock);
> kms->funcs->complete_commit(kms, crtc_mask);
> - mutex_unlock(&kms->commit_lock);
> + mutex_unlock(&kms->commit_lock[crtc_idx]);
> kms->funcs->disable_commit(kms);
>
> out:
> @@ -171,6 +169,16 @@ static unsigned get_crtc_mask(struct drm_atomic_state *state)
> return mask;
> }
>
> +static int get_crtc_id(struct msm_kms *kms, unsigned int crtc_mask)
> +{
> + struct drm_crtc *crtc;
> +
> + for_each_crtc_mask(kms->dev, crtc, crtc_mask)
> + return drm_crtc_index(crtc);
> +
> + return 0;
> +}
this is closer, but a commit could still touch multiple CRTCs, I think
what you should do is add a lock/unlock helper, similar to
vblank_get/put(), ie:
static void lock_crtcs(struct msm_kms *kms, unsigned crtc_mask)
{
struct drm_crtc *crtc;
for_each_crtc_mask(kms->dev, crtc, crtc_mask)
mutex_lock(&kms->commit_lock[drm_crtc_index(crtc)]);
}
and use that everywhere
(Technically we only go down the async path if there is only a single
crtc, but no reason not to use the lock/unlock helpers in both cases)
BR,
-R
> +
> void msm_atomic_commit_tail(struct drm_atomic_state *state)
> {
> struct drm_device *dev = state->dev;
> @@ -180,6 +188,7 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
> unsigned crtc_mask = get_crtc_mask(state);
> bool async = kms->funcs->vsync_time &&
> can_do_async(state, &async_crtc);
> + int crtc_idx = get_crtc_id(kms, crtc_mask);
>
> trace_msm_atomic_commit_tail_start(async, crtc_mask);
>
> @@ -189,12 +198,11 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
> * Ensure any previous (potentially async) commit has
> * completed:
> */
> + mutex_lock(&kms->commit_lock[crtc_idx]);
> trace_msm_atomic_wait_flush_start(crtc_mask);
> kms->funcs->wait_flush(kms, crtc_mask);
> trace_msm_atomic_wait_flush_finish(crtc_mask);
>
> - mutex_lock(&kms->commit_lock);
> -
> /*
> * Now that there is no in-progress flush, prepare the
> * current update:
> @@ -232,8 +240,7 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
> }
>
> kms->funcs->disable_commit(kms);
> - mutex_unlock(&kms->commit_lock);
> -
> + mutex_unlock(&kms->commit_lock[crtc_idx]);
> /*
> * At this point, from drm core's perspective, we
> * are done with the atomic update, so we can just
> @@ -260,8 +267,7 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
> */
> trace_msm_atomic_flush_commit(crtc_mask);
> kms->funcs->flush_commit(kms, crtc_mask);
> - mutex_unlock(&kms->commit_lock);
> -
> + mutex_unlock(&kms->commit_lock[crtc_idx]);
> /*
> * Wait for flush to complete:
> */
> @@ -271,9 +277,9 @@ void msm_atomic_commit_tail(struct drm_atomic_state *state)
>
> vblank_put(kms, crtc_mask);
>
> - mutex_lock(&kms->commit_lock);
> + mutex_lock(&kms->commit_lock[crtc_idx]);
> kms->funcs->complete_commit(kms, crtc_mask);
> - mutex_unlock(&kms->commit_lock);
> + mutex_unlock(&kms->commit_lock[crtc_idx]);
> kms->funcs->disable_commit(kms);
>
> drm_atomic_helper_commit_hw_done(state);
> diff --git a/drivers/gpu/drm/msm/msm_kms.h b/drivers/gpu/drm/msm/msm_kms.h
> index 1cbef6b..2049847 100644
> --- a/drivers/gpu/drm/msm/msm_kms.h
> +++ b/drivers/gpu/drm/msm/msm_kms.h
> @@ -155,7 +155,7 @@ struct msm_kms {
> * For async commit, where ->flush_commit() and later happens
> * from the crtc's pending_timer close to end of the frame:
> */
> - struct mutex commit_lock;
> + struct mutex commit_lock[MAX_CRTCS];
> unsigned pending_crtc_mask;
> struct msm_pending_timer pending_timers[MAX_CRTCS];
> };
> @@ -165,7 +165,9 @@ static inline void msm_kms_init(struct msm_kms *kms,
> {
> unsigned i;
>
> - mutex_init(&kms->commit_lock);
> + for (i = 0; i < ARRAY_SIZE(kms->commit_lock); i++)
> + mutex_init(&kms->commit_lock[i]);
> +
> kms->funcs = funcs;
>
> for (i = 0; i < ARRAY_SIZE(kms->pending_timers); i++)
> --
> 2.7.4
>
More information about the Freedreno
mailing list