[Freedreno] [v3, 2/3] arm64: dts: qcom: sc7180: Add gpu cooling support

[Akhil P Oommen]

On 10/29/2020 6:09 AM, mka at chromium.org wrote:
> Hi Akhil,
> 
> On Wed, Oct 28, 2020 at 07:09:53PM +0530, Akhil P Oommen wrote:
>> Add cooling-cells property and the cooling maps for the gpu tzones
>> to support GPU cooling.
>>
>> Signed-off-by: Akhil P Oommen <akhilpo at codeaurora.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 30 +++++++++++++++++++++++-------
>>   1 file changed, 23 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index d46b383..a7ea029 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -2,7 +2,7 @@
>>   /*
>>    * SC7180 SoC device tree source
>>    *
>> - * Copyright (c) 2019, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2019-20, The Linux Foundation. All rights reserved.
>>    */
>>   
>>   #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
>> @@ -1886,6 +1886,8 @@
>>   			operating-points-v2 = <&gpu_opp_table>;
>>   			qcom,gmu = <&gmu>;
>>   
>> +			#cooling-cells = <2>;
>> +
>>   			interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
>>   			interconnect-names = "gfx-mem";
>>   
>> @@ -3825,16 +3827,16 @@
>>   		};
>>   
>>   		gpuss0-thermal {
>> -			polling-delay-passive = <0>;
>> +			polling-delay-passive = <100>;
>>   			polling-delay = <0>;
>>   
>>   			thermal-sensors = <&tsens0 13>;
>>   
>>   			trips {
>>   				gpuss0_alert0: trip-point0 {
>> -					temperature = <90000>;
>> +					temperature = <95000>;
>>   					hysteresis = <2000>;
>> -					type = "hot";
>> +					type = "passive";
>>   				};
>>   
>>   				gpuss0_crit: gpuss0_crit {
>> @@ -3843,19 +3845,26 @@
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&gpuss0_alert0>;
>> +					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>>   		gpuss1-thermal {
>> -			polling-delay-passive = <0>;
>> +			polling-delay-passive = <100>;
>>   			polling-delay = <0>;
>>   
>>   			thermal-sensors = <&tsens0 14>;
>>   
>>   			trips {
>>   				gpuss1_alert0: trip-point0 {
>> -					temperature = <90000>;
>> +					temperature = <95000>;
>>   					hysteresis = <2000>;
>> -					type = "hot";
>> +					type = "passive";
>>   				};
>>   
>>   				gpuss1_crit: gpuss1_crit {
>> @@ -3864,6 +3873,13 @@
>>   					type = "critical";
>>   				};
>>   			};
>> +
>> +			cooling-maps {
>> +				map0 {
>> +					trip = <&gpuss0_alert0>;
> 
> Copy & paste error, this should be 'gpuss1_alert0'.
aah! you are correct.

--Akhil
> 
>> +					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> +				};
>> +			};
>>   		};
>>   
>>   		aoss1-thermal {
> 
> 
> Other than the C&P error:
> 
> Reviewed-by: Matthias Kaehlcke <mka at chromium.org>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>