[Freedreno] [PATCH v15 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings

[Rob Herring]

On Mon, 05 Apr 2021 16:36:09 +0530, Krishna Manikandan wrote:
> Add YAML schema for the device tree bindings for DSI PHY.
> 
> Signed-off-by: Krishna Manikandan <mkrishn at codeaurora.org>
> 
> Changes in v1:
>    - Merge dsi-phy.yaml and dsi-phy-10nm.yaml (Stephen Boyd)
>    - Remove qcom,dsi-phy-regulator-ldo-mode (Stephen Boyd)
>    - Add clock cells properly (Stephen Boyd)
>    - Remove unnecessary decription from clock names (Stephen Boyd)
>    - Add pin names for the supply entries for 10nm phy which is
>      used in sc7180 and sdm845 (Stephen Boyd)
>    - Remove unused header files from examples (Stephen Boyd)
>    - Drop labels for display nodes and correct node name (Stephen Boyd)
> 
> Changes in v2:
>    - Drop maxItems for clock (Stephen Boyd)
>    - Add vdds supply pin information for sdm845 (Stephen Boyd)
>    - Add examples for 14nm, 20nm and 28nm phy yaml files (Stephen Boyd)
>    - Keep child nodes directly under soc node (Stephen Boyd)
> 
> Changes in v3:
>    - Use a separate yaml file to describe the common properties
>      for all the dsi phy versions (Stephen Boyd)
>    - Remove soc from examples (Stephen Boyd)
>    - Add description for register property
> 
> Changes in v4:
>    - Modify the title for all the phy versions (Stephen Boyd)
>    - Drop description for all the phy versions (Stephen Boyd)
>    - Modify the description for register property (Stephen Boyd)
> 
> Changes in v5:
>    - Remove unused properties from common dsi phy file
>    - Add clock-cells and phy-cells to required property
>      list (Stephen Boyd)
> ---
>  .../bindings/display/msm/dsi-phy-10nm.yaml         | 68 +++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-14nm.yaml         | 66 ++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-20nm.yaml         | 71 ++++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-28nm.yaml         | 68 +++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-common.yaml       | 40 ++++++++++++
>  5 files changed, 313 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.example.dt.yaml:0:0: /example-0/dsi-phy at fd922a00: failed to match any schema with compatible: ['qcom,dsi-phy-28nm']

See https://patchwork.ozlabs.org/patch/1462327

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.