[Freedreno] [PATCH v15 2/4] dt-bindings: msm: dsi: add yaml schemas for DSI bindings
Rob Herring
robh at kernel.org
Thu Apr 8 15:03:00 UTC 2021
On Mon, Apr 05, 2021 at 04:36:08PM +0530, Krishna Manikandan wrote:
> Add YAML schema for the device tree bindings for DSI
>
> Signed-off-by: Krishna Manikandan <mkrishn at codeaurora.org>
>
> Changes in v1:
> - Separate dsi controller bindings to a separate patch (Stephen Boyd)
> - Merge dsi-common-controller.yaml and dsi-controller-main.yaml to
> a single file (Stephen Boyd)
> - Drop supply entries and definitions from properties (Stephen Boyd)
> - Modify phy-names property for dsi controller (Stephen Boyd)
> - Remove boolean from description (Stephen Boyd)
> - Drop pinctrl properties as they are standard entries (Stephen Boyd)
> - Modify the description for ports property and keep the reference
> to the generic binding where this is defined (Stephen Boyd)
> - Add description to clock names (Stephen Boyd)
> - Correct the indendation (Stephen Boyd)
> - Drop the label for display dt nodes and correct the node
> name (Stephen Boyd)
>
> Changes in v2:
> - Drop maxItems for clock (Stephen Boyd)
> - Drop qcom,mdss-mdp-transfer-time-us as it is not used in upstream
> dt file (Stephen Boyd)
> - Keep child node directly under soc node (Stephen Boyd)
> - Drop qcom,sync-dual-dsi as it is not used in upstream dt
>
> Changes in v3:
> - Add description for register property (Stephen Boyd)
>
> Changes in v4:
> - Add maxItems for phys property (Stephen Boyd)
> - Add maxItems for reg property (Stephen Boyd)
> - Add reference for data-lanes property (Stephen Boyd)
> - Remove soc from example (Stephen Boyd)
>
> Changes in v5:
> - Modify title and description (Stephen Boyd)
> - Add required properties for ports node (Stephen Boyd)
> - Add data-lanes in the example (Stephen Boyd)
> - Drop qcom,master-dsi property (Stephen Boyd)
>
> Changes in v6:
> - Add required properties for port at 0, port at 1 and corresponding
> endpoints (Stephen Boyd)
> - Add address-cells and size-cells for ports (Stephen Boyd)
> - Use additionalProperties instead of unevaluatedProperties (Stephen Boyd)
> ---
> .../bindings/display/msm/dsi-controller-main.yaml | 213 ++++++++++++++++++
> .../devicetree/bindings/display/msm/dsi.txt | 249 ---------------------
> 2 files changed, 213 insertions(+), 249 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> delete mode 100644 Documentation/devicetree/bindings/display/msm/dsi.txt
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> new file mode 100644
> index 0000000..7858524
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> @@ -0,0 +1,213 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display DSI controller
> +
> +maintainers:
> + - Krishna Manikandan <mkrishn at codeaurora.org>
> +
> +allOf:
> + - $ref: "../dsi-controller.yaml#"
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,mdss-dsi-ctrl
> +
> + reg:
> + maxItems: 1
> +
> + reg-names:
> + const: dsi_ctrl
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Display byte clock
> + - description: Display byte interface clock
> + - description: Display pixel clock
> + - description: Display escape clock
> + - description: Display AHB clock
> + - description: Display AXI clock
> +
> + clock-names:
> + items:
> + - const: byte
> + - const: byte_intf
> + - const: pixel
> + - const: core
> + - const: iface
> + - const: bus
> +
> + phys:
> + maxItems: 1
> +
> + phy-names:
> + const: dsi
> +
> + "#address-cells": true
> +
> + "#size-cells": true
> +
> + syscon-sfpb:
> + description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> + $ref: "/schemas/types.yaml#/definitions/phandle"
> +
> + qcom,dual-dsi-mode:
> + type: boolean
> + description: |
> + Indicates if the DSI controller is driving a panel which needs
> + 2 DSI links.
> +
> + ports:
Same issues in this one.
> + $ref: "/schemas/graph.yaml#/properties/port"
> + type: object
> + description: |
> + Contains DSI controller input and output ports as children, each
> + containing one endpoint subnode.
> +
> + properties:
> + port at 0:
> + type: object
> + description: |
> + Input endpoints of the controller.
> +
> + properties:
> + reg:
> + const: 0
> +
> + endpoint:
> + type: object
> + properties:
> + remote-endpoint:
Don't need to describe this, the common schema does.
> + description: |
> + For port at 1, set to phandle of the connected panel/bridge's
> + input endpoint. For port at 0, set to the MDP interface output.
> +
> + data-lanes:
> + $ref: "/schemas/media/video-interfaces.yaml#"
Not how this reference works. Look at other examples.
> + description: |
> + This describes how the physical DSI data lanes are mapped
> + to the logical lanes on the given platform. The value contained in
> + index n describes what physical lane is mapped to the logical lane n
> + (DATAn, where n lies between 0 and 3). The clock lane position is fixed
> + and can't be changed. Hence, they aren't a part of the DT bindings.
> +
> + items:
> + - const: 0
> + - const: 1
> + - const: 2
> + - const: 3
If this is the only possible value, why does it need to be in DT?
> +
> + required:
> + - remote-endpoint
> +
> + required:
> + - reg
> + - endpoint
> +
> + port at 1:
> + type: object
> + description: |
> + Output endpoints of the controller.
> + properties:
> + reg:
> + const: 1
> +
> + endpoint:
> + type: object
> + properties:
> + remote-endpoint: true
> + data-lanes:
> + items:
> + - const: 0
> + - const: 1
> + - const: 2
> + - const: 3
> +
> + required:
> + - remote-endpoint
> + - data-lanes
> +
> + required:
> + - reg
> + - endpoint
> +
> + required:
> + - port at 0
> + - port at 1
> + - "#address-cells"
> + - "#size-cells"
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - clocks
> + - clock-names
> + - phys
> + - phy-names
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> +
> + dsi at ae94000 {
> + compatible = "qcom,mdss-dsi-ctrl";
> + reg = <0x0ae94000 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <4>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + phys = <&dsi0_phy>;
> + phy-names = "dsi";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint = <&dpu_intf1_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + remote-endpoint = <&sn65dsi86_in>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
> deleted file mode 100644
> index b9a64d3..0000000
> --- a/Documentation/devicetree/bindings/display/msm/dsi.txt
> +++ /dev/null
> @@ -1,249 +0,0 @@
> -Qualcomm Technologies Inc. adreno/snapdragon DSI output
> -
> -DSI Controller:
> -Required properties:
> -- compatible:
> - * "qcom,mdss-dsi-ctrl"
> -- reg: Physical base address and length of the registers of controller
> -- reg-names: The names of register regions. The following regions are required:
> - * "dsi_ctrl"
> -- interrupts: The interrupt signal from the DSI block.
> -- power-domains: Should be <&mmcc MDSS_GDSC>.
> -- clocks: Phandles to device clocks.
> -- clock-names: the following clocks are required:
> - * "mdp_core"
> - * "iface"
> - * "bus"
> - * "core_mmss"
> - * "byte"
> - * "pixel"
> - * "core"
> - For DSIv2, we need an additional clock:
> - * "src"
> - For DSI6G v2.0 onwards, we need also need the clock:
> - * "byte_intf"
> -- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
> -- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
> - by a DSI PHY block. See [1] for details on clock bindings.
> -- vdd-supply: phandle to vdd regulator device node
> -- vddio-supply: phandle to vdd-io regulator device node
> -- vdda-supply: phandle to vdda regulator device node
> -- phys: phandle to DSI PHY device node
> -- phy-names: the name of the corresponding PHY device
> -- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
> -- ports: Contains 2 DSI controller ports as child nodes. Each port contains
> - an endpoint subnode as defined in [2] and [3].
> -
> -Optional properties:
> -- panel at 0: Node of panel connected to this DSI controller.
> - See files in [4] for each supported panel.
> -- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
> - driving a panel which needs 2 DSI links.
> -- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
> - the master link of the 2-DSI panel.
> -- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
> - driving a 2-DSI panel whose 2 links need receive command simultaneously.
> -- pinctrl-names: the pin control state names; should contain "default"
> -- pinctrl-0: the default pinctrl state (active)
> -- pinctrl-n: the "sleep" pinctrl state
> -- ports: contains DSI controller input and output ports as children, each
> - containing one endpoint subnode.
> -
> - DSI Endpoint properties:
> - - remote-endpoint: For port at 0, set to phandle of the connected panel/bridge's
> - input endpoint. For port at 1, set to the MDP interface output. See [2] for
> - device graph info.
> -
> - - data-lanes: this describes how the physical DSI data lanes are mapped
> - to the logical lanes on the given platform. The value contained in
> - index n describes what physical lane is mapped to the logical lane n
> - (DATAn, where n lies between 0 and 3). The clock lane position is fixed
> - and can't be changed. Hence, they aren't a part of the DT bindings. See
> - [3] for more info on the data-lanes property.
> -
> - For example:
> -
> - data-lanes = <3 0 1 2>;
> -
> - The above mapping describes that the logical data lane DATA0 is mapped to
> - the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2
> - to phys DATA1 and logic DATA3 to phys DATA2.
> -
> - There are only a limited number of physical to logical mappings possible:
> - <0 1 2 3>
> - <1 2 3 0>
> - <2 3 0 1>
> - <3 0 1 2>
> - <0 3 2 1>
> - <1 0 3 2>
> - <2 1 0 3>
> - <3 2 1 0>
You've dropped all these?
More information about the Freedreno
mailing list