December 2021 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Dec 1 02:53:51 UTC 2021
Ending: Fri Dec 31 04:49:37 UTC 2021
Messages: 287

• [Freedreno] [PATCH] drm/msm/dpu: fix exception in error path   Bjorn Andersson
• [Freedreno] [PATCH v4 4/4] arm64: dts: qcom: sc7280: Add Display Port node   Bjorn Andersson
• [Freedreno] [PATCH v4 1/4] arm64: dts: qcom: sc7280: add display dt nodes   Bjorn Andersson
• [Freedreno] [PATCH v4 1/4] arm64: dts: qcom: sc7280: add display dt nodes   Bjorn Andersson
• [Freedreno] [PATCH v4 2/4] arm64: dts: qcom: sc7280: Add DSI display nodes   Bjorn Andersson
• [Freedreno] [PATCH v4 3/4] arm64: dts: qcom: sc7280: add edp display dt nodes   Bjorn Andersson
• [Freedreno] [PATCH v4] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing   Bjorn Andersson
• [Freedreno] [RFC] drm/msm/dp: Allow attaching a drm_panel   Bjorn Andersson
• [Freedreno] [RFC] drm/msm/dp: Allow attaching a drm_panel   Bjorn Andersson
• [Freedreno] [PATCH v5] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing   Bjorn Andersson
• [Freedreno] [PATCH v6] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Bjorn Andersson
• [Freedreno] [PATCH v7] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Bjorn Andersson
• [Freedreno] [PATCH v2] drm/msm/dp: Only create debugfs for PRIMARY minor   Bjorn Andersson
• [Freedreno] [PATCH v6] drm/msm/dp: Add sc8180x DP controllers   Bjorn Andersson
• [Freedreno] [PATCH v9] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Bjorn Andersson
• [Freedreno] [PATCH v2] drm/msm/dp: Only create debugfs for PRIMARY minor   Bjorn Andersson
• [Freedreno] [PATCH] drm/msm/dp: Add DisplayPort controller for SM8350   Bjorn Andersson
• [Freedreno] [PATCH] drm/msm/dp: populate connector of struct dp_panel   Bjorn Andersson
• [Freedreno] [PATCH] drm/msm/dp: add support of tps4 (training pattern 4) for HBR3   Bjorn Andersson
• [Freedreno] [PATCH v2 2/2] drm/msm/dp: rewrite dss_module_power to use bulk clock functions   Bjorn Andersson
• [Freedreno] [PATCH] drm/msm/dpu: fix exception in error path   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm: Initialize MDSS irq domain at probe time   Dmitry Baryshkov
• [Freedreno] [PATCH v1 0/8] drm/msm/dpu: cleanup debugfs code   Dmitry Baryshkov
• [Freedreno] [PATCH v1 1/8] drm/msm/dpu: move disable_danger out of plane subdir   Dmitry Baryshkov
• [Freedreno] [PATCH v1 2/8] drm/msm/dpu: fix safe status debugfs file   Dmitry Baryshkov
• [Freedreno] [PATCH v1 3/8] drm/msm/dpu: make danger_status/safe_status readable   Dmitry Baryshkov
• [Freedreno] [PATCH v1 4/8] drm/msm/dpu: drop plane's default_scaling debugfs file   Dmitry Baryshkov
• [Freedreno] [PATCH v1 5/8] drm/msm/dpu: stop manually removing debugfs files for the DPU plane   Dmitry Baryshkov
• [Freedreno] [PATCH v1 6/8] drm/msm/dpu: stop manually removing debugfs files for the DPU CRTC   Dmitry Baryshkov
• [Freedreno] [PATCH v1 7/8] drm/msm/dpu: simplify DPU's regset32 code   Dmitry Baryshkov
• [Freedreno] [PATCH v1 8/8] drm/msm/dpu: move SSPP debugfs support from plane to SSPP code   Dmitry Baryshkov
• [Freedreno] [PATCH v2 0/4] drm/msm/dpu: cleanup plane state   Dmitry Baryshkov
• [Freedreno] [PATCH v2 1/4] drm/msm/dpu: drop scaler config from plane state   Dmitry Baryshkov
• [Freedreno] [PATCH v2 2/4] drm/msm/dpu: drop pe argument from _dpu_hw_sspp_setup_scaler3   Dmitry Baryshkov
• [Freedreno] [PATCH v2 3/4] drm/msm/dpu: simplify DPU_SSPP features checks   Dmitry Baryshkov
• [Freedreno] [PATCH v2 4/4] drm/msm/dpu: fix CDP setup to account for multirect index   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm: Initialize MDSS irq domain at probe time   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm/dpu: removed logically dead code   Dmitry Baryshkov
• [Freedreno] [PATCH -next] drm: remove node from list before freeing the node   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm/a5xx: Add support for Adreno 506 GPU   Dmitry Baryshkov
• [Freedreno] [PATCH v2] drm/msm/dpu: removed logically dead code   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm/dp: Add "qcom, sc7280-dp" to support display port.   Dmitry Baryshkov
• [Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector   Dmitry Baryshkov
• [Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector   Dmitry Baryshkov
• [Freedreno] [PATCH 0/2] drm/msm/dsi: switch msm/dsi to DRM_PANEL_BRIDGE   Dmitry Baryshkov
• [Freedreno] [PATCH 1/2] drm/msm/dsi: move DSI host powerup to modeset time   Dmitry Baryshkov
• [Freedreno] [PATCH 2/2] drm/msm/dsi: switch to DRM_PANEL_BRIDGE   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm: drop dbgname argument from msm_ioremap*()   Dmitry Baryshkov
• [Freedreno] [PATCH 1/2] drm/ bridge: tc358762: move bridge init to enable callback   Dmitry Baryshkov
• [Freedreno] [PATCH v1 8/8] drm/msm/dpu: move SSPP debugfs support from plane to SSPP code   Dmitry Baryshkov
• [Freedreno] [PATCH v2 2/2] drm/msm/dpu: Fix timeout issues on command mode panels   Dmitry Baryshkov
• [Freedreno] [PATCH 3/3] drm/msm/debugfs: Add display/kms state snapshot   Dmitry Baryshkov
• [Freedreno] [PATCH 1/2] drm/msm/dpu: add dpu_crtc_atomic_print_state   Dmitry Baryshkov
• [Freedreno] [PATCH 2/2] drm/msm/dpu: add dpu_plane_atomic_print_state   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm: drop dbgname argument from msm_ioremap*()   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm/dp: Fix double free on error in msm_dp_bridge_init()   Dmitry Baryshkov
• [Freedreno] [PATCH] drm/msm: Don't use autosuspend for display   Dmitry Baryshkov
• [Freedreno] [PATCH v2 1/3] drm/msm/disp: Tweak display snapshot to match gpu snapshot   Dmitry Baryshkov
• [Freedreno] [PATCH v2 2/3] drm/msm/disp: Export helper for capturing snapshot   Dmitry Baryshkov
• [Freedreno] [PATCH v2 3/3] drm/msm/debugfs: Add display/kms state snapshot   Dmitry Baryshkov
• [Freedreno] [PATCH v3 1/2] drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent   Dmitry Baryshkov
• [Freedreno] [PATCH v3 0/2] Use "ref" clocks from firmware for DSI PLL VCO parent   Dmitry Baryshkov
• [Freedreno] [PATCH v2 1/3] drm/msm/disp: Tweak display snapshot to match gpu snapshot   Dmitry Baryshkov
• [Freedreno] [PATCH v2 2/3] drm/msm/disp: Export helper for capturing snapshot   Dmitry Baryshkov
• [Freedreno] [PATCH v2] drm/msm/dp: Only create debugfs for PRIMARY minor   Dmitry Baryshkov
• [Freedreno] [PATCH] dt-bindings: msm: disp: remove bus from dpu bindings   Dmitry Baryshkov
• [Freedreno] [PATCH v6] drm/msm/dp: Add sc8180x DP controllers   Dmitry Baryshkov
• [Freedreno] [PATCH 1/3] drm/plane: Mention format_mod_supported in IN_FORMATS docs   Dmitry Baryshkov
• [Freedreno] [PATCH 0/3] Add missing format_mod_supported functions   Dmitry Baryshkov
• [Freedreno] [PATCH 1/3] drm/plane: Mention format_mod_supported in IN_FORMATS docs   Dmitry Baryshkov
• [Freedreno] [PATCH] dt-bindings: display/msm: hdmi: split and convert to yaml   Dmitry Baryshkov
• [Freedreno] [PATCH] Discussion: dt-bindings: display: msm: dsi-controller-main: fix the binding   Dmitry Baryshkov
• [Freedreno] [PATCH v2 2/2] drm/msm/dp: rewrite dss_module_power to use bulk clock functions   Dmitry Baryshkov
• [Freedreno] [v1 1/2] dt-bindings: msm/dsi: Add 10nm dsi phy tuning properties   Dmitry Baryshkov
• [Freedreno] [v1 1/2] dt-bindings: msm/dsi: Add 10nm dsi phy tuning properties   Dmitry Baryshkov
• [Freedreno] [v1 2/2] drm/msm/dsi: Add 10nm dsi phy tuning configuration support   Dmitry Baryshkov
• [Freedreno] [PATCH v2 2/2] drm/msm/dp: rewrite dss_module_power to use bulk clock functions   Dmitry Baryshkov
• [Freedreno] [PATCH v2 2/2] drm/msm/dp: rewrite dss_module_power to use bulk clock functions   Dmitry Baryshkov
• [Freedreno] [PATCH v5 0/4] arm: dts: qcom: sc7280: Add display DT nodes for sc7280   Sankeerth Billakanti
• [Freedreno] [PATCH v5 1/4] arm64: dts: qcom: sc7280: add display dt nodes   Sankeerth Billakanti
• [Freedreno] [PATCH v5 2/4] arm64: dts: qcom: sc7280: Add DSI display nodes   Sankeerth Billakanti
• [Freedreno] [PATCH v5 3/4] arm64: dts: qcom: sc7280: add edp display dt nodes   Sankeerth Billakanti
• [Freedreno] [PATCH v5 4/4] arm64: dts: qcom: sc7280: Add Display Port node   Sankeerth Billakanti
• [Freedreno] [PATCH v4 00/34] component: Make into an aggregate bus   Stephen Boyd
• [Freedreno] [PATCH v4 01/34] component: Introduce struct aggregate_device   Stephen Boyd
• [Freedreno] [PATCH v4 02/34] component: Remove most references to 'master'   Stephen Boyd
• [Freedreno] [PATCH v4 03/34] component: Introduce the aggregate bus_type   Stephen Boyd
• [Freedreno] [PATCH v4 04/34] component: Move struct aggregate_device out to header file   Stephen Boyd
• [Freedreno] [PATCH v4 05/34] component: Add {bind, unbind}_component() ops that take aggregate device   Stephen Boyd
• [Freedreno] [PATCH v4 06/34] drm/of: Add a drm_of_aggregate_probe() API   Stephen Boyd
• [Freedreno] [PATCH v4 07/34] drm/msm: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 08/34] drm/komeda: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 09/34] drm/arm/hdlcd: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 10/34] drm/malidp: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 11/34] drm/armada: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 12/34] drm/etnaviv: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 13/34] drm/kirin: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 14/34] drm/exynos: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 15/34] drm/imx: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 16/34] drm/ingenic: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 17/34] drm/mcde: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 18/34] drm/mediatek: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 19/34] drm/meson: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 20/34] drm/omap: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 21/34] drm/rockchip: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 22/34] drm/sti: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 23/34] drm/sun4i: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 24/34] drm/tilcdc: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 25/34] drm/vc4: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 26/34] iommu/mtk: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 27/34] mei: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 28/34] power: supply: ab8500: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 29/34] fbdev: omap2: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 30/34] sound: hdac: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 31/34] ASoC: codecs: wcd938x: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 32/34] mei: pxp: Migrate to aggregate driver   Stephen Boyd
• [Freedreno] [PATCH v4 33/34] component: Get rid of drm_of_component_probe()   Stephen Boyd
• [Freedreno] [PATCH v4 34/34] component: Remove component_master_ops and friends   Stephen Boyd
• [Freedreno] [PATCH v4] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing   Stephen Boyd
• [Freedreno] [PATCH v4] drm/msm/dp: do not initialize phy until plugin interrupt received   Stephen Boyd
• [Freedreno] [PATCH] drm/msm/dp: Add "qcom, sc7280-dp" to support display port.   Stephen Boyd
• [Freedreno] [PATCH v5] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed   Stephen Boyd
• [Freedreno] [PATCH v6] drm/msm/dp: do not initialize phy until plugin interrupt received   Stephen Boyd
• [Freedreno] [PATCH v4 14/14] drm/msm: Implement HDCP 1.x using the new drm HDCP helpers   Stephen Boyd
• [Freedreno] [PATCH v4 00/34] component: Make into an aggregate bus   Stephen Boyd
• [Freedreno] [PATCH v7 2/2] drm/msm/dp: do not initialize phy until plugin interrupt received   Stephen Boyd
• [Freedreno] [PATCH] drm/msm: Don't use autosuspend for display   Stephen Boyd
• [Freedreno] [PATCH 1/2] drm/msm/dpu: add dpu_crtc_atomic_print_state   Stephen Boyd
• [Freedreno] [PATCH 2/2] drm/msm/dpu: add dpu_plane_atomic_print_state   Stephen Boyd
• [Freedreno] [PATCH] drm/msm/dp: remove unneeded variable   Stephen Boyd
• [Freedreno] [PATCH v3 0/2] Use "ref" clocks from firmware for DSI PLL VCO parent   Stephen Boyd
• [Freedreno] [PATCH] drm/msm/dp: Fix double free on error in msm_dp_bridge_init()   Dan Carpenter
• [Freedreno] [igt-dev] [PATCH igt 1/2] igt: Split out I/O helpers   Rob Clark
• [Freedreno] [PATCH v4 00/14] drm/hdcp: Pull HDCP auth/exchange/check into helpers   Rob Clark
• [Freedreno] [PATCH] drm/msm: drop dbgname argument from msm_ioremap*()   Rob Clark
• [Freedreno] [PATCH v4 13/14] arm64: dts: qcom: sc7180: Add support for HDCP in dp-controller   Rob Clark
• [Freedreno] [PATCH] drm/msm/a6xx: Skip crashdumper state if GPU needs_hw_init   Rob Clark
• [Freedreno] [PATCH 0/3] drm/msm: Add display snapshot debugfs   Rob Clark
• [Freedreno] [PATCH 1/3] drm/msm/disp: Tweak display snapshot to match gpu snapshot   Rob Clark
• [Freedreno] [PATCH 2/3] drm/msm/disp: Export helper for capturing snapshot   Rob Clark
• [Freedreno] [PATCH 3/3] drm/msm/debugfs: Add display/kms state snapshot   Rob Clark
• [Freedreno] [PATCH v2 0/3] drm/msm: Add display snapshot debugfs   Rob Clark
• [Freedreno] [PATCH v2 1/3] drm/msm/disp: Tweak display snapshot to match gpu snapshot   Rob Clark
• [Freedreno] [PATCH v2 2/3] drm/msm/disp: Export helper for capturing snapshot   Rob Clark
• [Freedreno] [PATCH v2 3/3] drm/msm/debugfs: Add display/kms state snapshot   Rob Clark
• [Freedreno] [PATCH] drm/msm: Don't use autosuspend for display   Rob Clark
• [Freedreno] [PATCH] drm/msm: Don't use autosuspend for display   Rob Clark
• [Freedreno] [PATCH v2 1/3] drm/msm/disp: Tweak display snapshot to match gpu snapshot   Rob Clark
• [Freedreno] [PATCH] drm/msm: drop dbgname argument from msm_ioremap*()   Rob Clark
• [Freedreno] [pull] drm/msm: drm-msm-next-2021-12-26 for 5.17   Rob Clark
• [Freedreno] [PATCH] iommu/arm-smmu-qcom: Fix TTBR0 read   Will Deacon
• [Freedreno] [PATCH v2 1/3] iommu/io-pgtable-arm: Add way to debug pgtable walk   Will Deacon
• [Freedreno] [RFC] drm/msm/dp: Allow attaching a drm_panel   Imre Deak
• [Freedreno] [PATCH 0/3] Add missing format_mod_supported functions   José Expósito
• [Freedreno] [PATCH 1/3] drm/plane: Mention format_mod_supported in IN_FORMATS docs   José Expósito
• [Freedreno] [PATCH 2/3] drm/msm/mdp4: Add format_mod_supported function   José Expósito
• [Freedreno] [PATCH 3/3] drm/sun4i: Add format_mod_supported function   José Expósito
• [Freedreno] [RFC] drm/msm/dp: Allow attaching a drm_panel   Hans de Goede
• [Freedreno] [PATCH] drm/msm/dpu: removed logically dead code   Ameer Hamza
• [Freedreno] [PATCH v2] drm/msm/dpu: removed logically dead code   Ameer Hamza
• [Freedreno] [PATCH] dt-bindings: msm: disp: remove bus from dpu bindings   David Heidelberg
• [Freedreno] [PATCH] dt-bindings: display/msm: hdmi: split and convert to yaml   David Heidelberg
• [Freedreno] [PATCH] Discussion: dt-bindings: display: msm: dsi-controller-main: fix the binding   David Heidelberg
• [Freedreno] [PATCH bpf v2] treewide: add missing includes masked by cgroup -> bpf dependency   Christoph Hellwig
• [Freedreno] [PATCH] dt-bindings: msm: disp: remove bus from dpu bindings   Rob Herring
• [Freedreno] [PATCH] drm/msm/dp: Add "qcom, sc7280-dp" to support display port.   Kuogee Hsieh
• [Freedreno] [PATCH v4] drm/msm/dp: do not initialize phy until plugin interrupt received   Kuogee Hsieh
• [Freedreno] [PATCH v2] drm/msm/dp: Add "qcom, sc7280-dp" to support display port.   Kuogee Hsieh
• [Freedreno] [PATCH v5] drm/msm/dp: do not initialize phy until plugin interrupt received   Kuogee Hsieh
• [Freedreno] [PATCH v6] drm/msm/dp: employ bridge mechanism for display enable and disable   Kuogee Hsieh
• [Freedreno] [PATCH v5] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed   Kuogee Hsieh
• [Freedreno] [PATCH v5] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing   Kuogee Hsieh
• [Freedreno] [PATCH v6] drm/msm/dp: do not initialize phy until plugin interrupt received   Kuogee Hsieh
• [Freedreno] [PATCH v6] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Kuogee Hsieh
• [Freedreno] [PATCH v7] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Kuogee Hsieh
• [Freedreno] [PATCH v7 1/2] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed   Kuogee Hsieh
• [Freedreno] [PATCH v7 2/2] drm/msm/dp: do not initialize phy until plugin interrupt received   Kuogee Hsieh
• [Freedreno] [PATCH v8] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Kuogee Hsieh
• [Freedreno] [PATCH v9] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Kuogee Hsieh
• [Freedreno] [PATCH v7 2/2] drm/msm/dp: do not initialize phy until plugin interrupt received   Kuogee Hsieh
• [Freedreno] [PATCH v8 1/2] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed   Kuogee Hsieh
• [Freedreno] [PATCH v8 2/2] drm/msm/dp: do not initialize phy until plugin interrupt received   Kuogee Hsieh
• [Freedreno] [PATCH v9 1/2] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed   Kuogee Hsieh
• [Freedreno] [PATCH v9 2/2] drm/msm/dp: do not initialize phy until plugin interrupt received   Kuogee Hsieh
• [Freedreno] [PATCH] drm/msm/dp: Fix a potential double free in an error handling path   Kuogee Hsieh
• [Freedreno] [PATCH] drm/msm/dp: populate connector of struct dp_panel   Kuogee Hsieh
• [Freedreno] [PATCH] drm/msm/dp: add support of tps4 (training pattern 4) for HBR3   Kuogee Hsieh
• [Freedreno] [PATCH v2] drm/msm/dp: add support of tps4 (training pattern 4) for HBR3   Kuogee Hsieh
• [Freedreno] [PATCH v2] drm/msm/dp: populate connector of struct dp_panel   Kuogee Hsieh
• [Freedreno] [PATCH v2 2/2] drm/msm/dp: rewrite dss_module_power to use bulk clock functions   Kuogee Hsieh
• [Freedreno] [PATCH] drm/msm/dp: Simplify dp_debug_init() and dp_debug_get()   Christophe JAILLET
• [Freedreno] [PATCH] drm/msm/dp: Fix a potential double free in an error handling path   Christophe JAILLET
• [Freedreno] [PATCH bpf v2] treewide: add missing includes masked by cgroup -> bpf dependency   Greg KH
• [Freedreno] [PATCH bpf v2] treewide: add missing includes masked by cgroup -> bpf dependency   Jakub Kicinski
• [Freedreno] [PATCH v4] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing   Vinod Koul
• [Freedreno] [PATCH v6] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Vinod Koul
• [Freedreno] [PATCH v8] phy: qcom-qmp: add display port v4 voltage and pre-emphasis swing tables   Vinod Koul
• [Freedreno] [PATCH v4 01/34] component: Introduce struct aggregate_device   Greg Kroah-Hartman
• [Freedreno] [PATCH v4 01/34] component: Introduce struct aggregate_device   Greg Kroah-Hartman
• [Freedreno] [PATCH v5] drm/msm/dp: employ bridge mechanism for display enable and disable   Abhinav Kumar
• [Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector   Abhinav Kumar
• [Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector   Abhinav Kumar
• [Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector   Abhinav Kumar
• [Freedreno] [PATCH v2 1/4] drm/msm/dpu: drop scaler config from plane state   Abhinav Kumar
• [Freedreno] [PATCH v2 2/4] drm/msm/dpu: drop pe argument from _dpu_hw_sspp_setup_scaler3   Abhinav Kumar
• [Freedreno] [PATCH v2 3/4] drm/msm/dpu: simplify DPU_SSPP features checks   Abhinav Kumar
• [Freedreno] [PATCH v2 4/4] drm/msm/dpu: fix CDP setup to account for multirect index   Abhinav Kumar
• [Freedreno] [PATCH] drm/msm/dsi: fix initialization in the bonded DSI case   Abhinav Kumar
• [Freedreno] [PATCH v1 1/8] drm/msm/dpu: move disable_danger out of plane subdir   Abhinav Kumar
• [Freedreno] [PATCH v1 2/8] drm/msm/dpu: fix safe status debugfs file   Abhinav Kumar
• [Freedreno] [PATCH v1 3/8] drm/msm/dpu: make danger_status/safe_status readable   Abhinav Kumar
• [Freedreno] [PATCH v1 4/8] drm/msm/dpu: drop plane's default_scaling debugfs file   Abhinav Kumar
• [Freedreno] [PATCH v1 5/8] drm/msm/dpu: stop manually removing debugfs files for the DPU plane   Abhinav Kumar
• [Freedreno] [PATCH v1 6/8] drm/msm/dpu: stop manually removing debugfs files for the DPU CRTC   Abhinav Kumar
• [Freedreno] [PATCH v1 7/8] drm/msm/dpu: simplify DPU's regset32 code   Abhinav Kumar
• [Freedreno] [PATCH v1 8/8] drm/msm/dpu: move SSPP debugfs support from plane to SSPP code   Abhinav Kumar
• [Freedreno] [PATCH v1 8/8] drm/msm/dpu: move SSPP debugfs support from plane to SSPP code   Abhinav Kumar
• [Freedreno] [PATCH 1/2] drm/msm/dpu: add dpu_crtc_atomic_print_state   Abhinav Kumar
• [Freedreno] [PATCH 2/2] drm/msm/dpu: add dpu_plane_atomic_print_state   Abhinav Kumar
• [Freedreno] [PATCH v1 8/8] drm/msm/dpu: move SSPP debugfs support from plane to SSPP code   Abhinav Kumar
• [Freedreno] [PATCH] drm/msm/dpu: add layer mixer register dump to dpu snapshot   Abhinav Kumar
• [Freedreno] [PATCH v2] drm/msm/dp: Only create debugfs for PRIMARY minor   Abhinav Kumar
• [Freedreno] [PATCH v6] drm/msm/dp: Add sc8180x DP controllers   Abhinav Kumar
• [Freedreno] [igt-dev] [PATCH igt 1/2] igt: Split out I/O helpers   Petri Latvala
• [Freedreno] [igt-dev] [PATCH igt 1/2] igt: Split out I/O helpers   Petri Latvala
• [Freedreno] [PATCH AUTOSEL 5.15 01/24] drm/msm: Fix null ptr access msm_ioctl_gem_submit()   Sasha Levin
• [Freedreno] [PATCH AUTOSEL 5.15 02/24] drm/msm/a6xx: Fix uinitialized use of gpu_scid   Sasha Levin
• [Freedreno] [PATCH AUTOSEL 5.15 03/24] drm/msm/dsi: set default num_data_lanes   Sasha Levin
• [Freedreno] [PATCH AUTOSEL 5.15 04/24] drm/msm/dp: Avoid unpowered AUX xfers that caused crashes   Sasha Levin
• [Freedreno] [PATCH AUTOSEL 5.10 01/15] drm/msm/dsi: set default num_data_lanes   Sasha Levin
• [Freedreno] [PATCH AUTOSEL 5.4 01/10] drm/msm/dsi: set default num_data_lanes   Sasha Levin
• [Freedreno] [PATCH AUTOSEL 4.19 1/7] drm/msm/dsi: set default num_data_lanes   Sasha Levin
• [Freedreno] [PATCH AUTOSEL 4.14 1/6] drm/msm/dsi: set default num_data_lanes   Sasha Levin
• [Freedreno] [PATCH -next] drm: remove node from list before freeing the node   Yang Li
• [Freedreno] [PATCH -next] drm/msm: remove variable set but not used   Yang Li
• [Freedreno] [PATCH] drm/msm/dsi: Fix missing put_device() call in dsi_get_phy   Miaoqian Lin
• [Freedreno] [PATCH] drm/msm/a5xx: Add support for Adreno 506 GPU   Vladimir Lypak
• [Freedreno] [PATCH] drm/msm/a5xx: Add support for Adreno 506 GPU   Vladimir Lypak
• [Freedreno] [PATCH v2 1/2] drm/msm/a5xx: Add support for Adreno 506 GPU   Vladimir Lypak
• [Freedreno] [PATCH v2 2/2] drm/msm/a5xx: Fix missing CP_PROTECT for SMMU on A540   Vladimir Lypak
• [Freedreno] [v1 0/2] drm/msm/dsi: Add 10nm dsi phy tuning configuration support   Rajeev Nandan
• [Freedreno] [v1 1/2] dt-bindings: msm/dsi: Add 10nm dsi phy tuning properties   Rajeev Nandan
• [Freedreno] [v1 2/2] drm/msm/dsi: Add 10nm dsi phy tuning configuration support   Rajeev Nandan
• [Freedreno] [Intel-gfx] [PATCH 2/3] drm/dp: Move DP declarations into separate header file   Jani Nikula
• [Freedreno] [PATCH 0/3] drm/dp: Move DisplayPort helpers into own module   Jani Nikula
• [Freedreno] [PATCH 0/3] drm/dp: Move DisplayPort helpers into own module   Jani Nikula
• [Freedreno] [PATCH v2 3/5] drm/dp: Move DisplayPort helpers into separate helper module   Jani Nikula
• [Freedreno] [PATCH 1/2] drm/ bridge: tc358762: move bridge init to enable callback   Laurent Pinchart
• [Freedreno] [PATCH v3 0/2] drm/msm: Fix dsi/bridge probe   AngeloGioacchino Del Regno
• [Freedreno] [PATCH v3 1/2] drm/msm: Allocate msm_drm_private early and pass it as driver data   AngeloGioacchino Del Regno
• [Freedreno] [PATCH v3 2/2] drm/msm: Initialize MDSS irq domain at probe time   AngeloGioacchino Del Regno
• [Freedreno] [PATCH] drm/msm: Initialize MDSS irq domain at probe time   AngeloGioacchino Del Regno
• [Freedreno] [PATCH] drm/msm: Initialize MDSS irq domain at probe time   AngeloGioacchino Del Regno
• [Freedreno] [PATCH v2 2/2] drm/msm/dpu: Fix timeout issues on command mode panels   AngeloGioacchino Del Regno
• [Freedreno] [PATCH v2 2/2] drm/msm/dpu: Fix timeout issues on command mode panels   AngeloGioacchino Del Regno
• [Freedreno] [PATCH 1/3] drm/plane: Mention format_mod_supported in IN_FORMATS docs   Simon Ser
• [Freedreno] [PATCH 1/3] drm/plane: Mention format_mod_supported in IN_FORMATS docs   Simon Ser
• [Freedreno] [PATCH 1/3] drm/plane: Mention format_mod_supported in IN_FORMATS docs   Simon Ser
• [Freedreno] [PATCH bpf v2] treewide: add missing includes masked by cgroup -> bpf dependency   Alexei Starovoitov
• [Freedreno] [PATCH v3 12/13] drm/msm/dsi: Add support for DSC configuration   Marijn Suijten
• [Freedreno] [PATCH v2 2/2] drm/msm/dpu: Fix timeout issues on command mode panels   Marijn Suijten
• [Freedreno] [PATCH v2 2/2] drm/msm/dpu: Fix timeout issues on command mode panels   Marijn Suijten
• [Freedreno] [PATCH v3 0/2] Use "ref" clocks from firmware for DSI PLL VCO parent   Marijn Suijten
• [Freedreno] [PATCH v3 0/2] Use "ref" clocks from firmware for DSI PLL VCO parent   Marijn Suijten
• [Freedreno] [PATCH] drm/msm/dpu: Bind pingpong block to intf on active ctls in cmd encoder   Marijn Suijten
• [Freedreno] [PATCH v2 2/2] drm/msm/dpu: Fix timeout issues on command mode panels   Marijn Suijten
• [Freedreno] [PATCH v4 00/34] component: Make into an aggregate bus   Daniel Vetter
• [Freedreno] [PATCH v4 28/34] power: supply: ab8500: Migrate to aggregate driver   Linus Walleij
• [Freedreno] [PATCH v4 00/34] component: Make into an aggregate bus   Linus Walleij
• [Freedreno] [PATCH 0/3] drm/dp: Move DisplayPort helpers into own module   Thomas Zimmermann
• [Freedreno] [PATCH 1/3] drm/dp_mst: Remove trailing whitespace.   Thomas Zimmermann
• [Freedreno] [PATCH 2/3] drm/dp: Move DP declarations into separate header file   Thomas Zimmermann
• [Freedreno] [PATCH 3/3] drm/dp: Move DisplayPort helpers into separate helper module   Thomas Zimmermann
• [Freedreno] [PATCH 0/3] drm/dp: Move DisplayPort helpers into own module   Thomas Zimmermann
• [Freedreno] [PATCH v2 0/5] drm/dp: Move DisplayPort helpers into own module   Thomas Zimmermann
• [Freedreno] [PATCH v2 1/5] drm/dp_mst: Remove trailing whitespace.   Thomas Zimmermann
• [Freedreno] [PATCH v2 2/5] drm/dp: Move DP declarations into separate header file   Thomas Zimmermann
• [Freedreno] [PATCH v2 3/5] drm/dp: Move DisplayPort helpers into separate helper module   Thomas Zimmermann
• [Freedreno] [PATCH v2 4/5] drm/dp: Move public DisplayPort headers into dp/   Thomas Zimmermann
• [Freedreno] [PATCH v2 5/5] drm/dp: Move DisplayPort AUX bus helpers into dp/   Thomas Zimmermann
• [Freedreno] [PATCH v2 3/5] drm/dp: Move DisplayPort helpers into separate helper module   Thomas Zimmermann
• [Freedreno] [PATCH] drm/msm/dp: Move debugfs files into subdirectory   abhinavk at codeaurora.org
• [Freedreno] [PATCH v4 4/4] drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read failed   khsieh at codeaurora.org
• [Freedreno] [PATCH] drm/msm/dp: remove unneeded variable   cgel.zte at gmail.com
• [Freedreno] [PATCH] drm/msm: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE   cgel.zte at gmail.com
• [Freedreno] [PATCH bpf v2] treewide: add missing includes masked by cgroup -> bpf dependency   patchwork-bot+netdevbpf at kernel.org
• [Freedreno] [PATCH v2 1/2] drm/msm: Allocate msm_drm_private early and pass it as driver data   kernel test robot

Last message date: Fri Dec 31 04:49:37 UTC 2021
Archived on: Fri Dec 31 04:49:50 UTC 2021

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...