[Freedreno] [PATCH] drm/msm/a6xx: fix for kernels without CONFIG_NVMEM

[Akhil P Oommen]

On 2/18/2021 2:05 AM, Jonathan Marek wrote:
> On 2/17/21 3:18 PM, Rob Clark wrote:
>> On Wed, Feb 17, 2021 at 11:08 AM Jordan Crouse 
>> <jcrouse at codeaurora.org> wrote:
>>>
>>> On Wed, Feb 17, 2021 at 07:14:16PM +0530, Akhil P Oommen wrote:
>>>> On 2/17/2021 8:36 AM, Rob Clark wrote:
>>>>> On Tue, Feb 16, 2021 at 12:10 PM Jonathan Marek <jonathan at marek.ca> 
>>>>> wrote:
>>>>>>
>>>>>> Ignore nvmem_cell_get() EOPNOTSUPP error in the same way as a 
>>>>>> ENOENT error,
>>>>>> to fix the case where the kernel was compiled without CONFIG_NVMEM.
>>>>>>
>>>>>> Fixes: fe7952c629da ("drm/msm: Add speed-bin support to a618 gpu")
>>>>>> Signed-off-by: Jonathan Marek <jonathan at marek.ca>
>>>>>> ---
>>>>>>   drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 6 +++---
>>>>>>   1 file changed, 3 insertions(+), 3 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c 
>>>>>> b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>>>>>> index ba8e9d3cf0fe..7fe5d97606aa 100644
>>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>>>>>> @@ -1356,10 +1356,10 @@ static int a6xx_set_supported_hw(struct 
>>>>>> device *dev, struct a6xx_gpu *a6xx_gpu,
>>>>>>
>>>>>>          cell = nvmem_cell_get(dev, "speed_bin");
>>>>>>          /*
>>>>>> -        * -ENOENT means that the platform doesn't support 
>>>>>> speedbin which is
>>>>>> -        * fine
>>>>>> +        * -ENOENT means no speed bin in device tree,
>>>>>> +        * -EOPNOTSUPP means kernel was built without CONFIG_NVMEM
>>>>>
>>>>> very minor nit, it would be nice to at least preserve the gist of the
>>>>> "which is fine" (ie. some variation of "this is an optional thing and
>>>>> things won't catch fire without it" ;-))
>>>>>
>>>>> (which is, I believe, is true, hopefully Akhil could confirm.. if not
>>>>> we should have a harder dependency on CONFIG_NVMEM..)
>>>> IIRC, if the gpu opp table in the DT uses the 'opp-supported-hw' 
>>>> property,
>>>> we will see some error during boot up if we don't call
>>>> dev_pm_opp_set_supported_hw(). So calling "nvmem_cell_get(dev, 
>>>> "speed_bin")"
>>>> is a way to test this.
>>>>
>>>> If there is no other harm, we can put a hard dependency on 
>>>> CONFIG_NVMEM.
>>>
>>> I'm not sure if we want to go this far given the squishiness about 
>>> module
>>> dependencies. As far as I know we are the only driver that uses this 
>>> seriously
>>> on QCOM SoCs and this is only needed for certain targets. I don't 
>>> know if we
>>> want to force every target to build NVMEM and QFPROM on our behalf. 
>>> But maybe
>>> I'm just saying that because Kconfig dependencies tend to break my 
>>> brain (and
>>> then Arnd has to send a patch to fix it).
>>>
>>
>> Hmm, good point.. looks like CONFIG_NVMEM itself doesn't have any
>> other dependencies, so I suppose it wouldn't be the end of the world
>> to select that.. but I guess we don't want to require QFPROM
>>
>> I guess at the end of the day, what is the failure mode if you have a
>> speed-bin device, but your kernel config misses QFPROM (and possibly
>> NVMEM)?  If the result is just not having the highest clk rate(s)

Atleast on sc7180's gpu, using an unsupported FMAX breaks gmu. It won't 
be very obvious what went wrong when this happens!

-Akhil.

>> available, that isn't the end of the world.  But if it makes things
>> not-work, that is sub-optimal.  Generally, especially on ARM, kconfig
>> seems to be way harder than it should be to build a kernel that works,
>> if we could somehow not add to that problem (for both people with a6xx
>> and older gens) that would be nice ;-)
>>
> 
> There is a "imply" kconfig option which solves exactly this problem. 
> (you would "imply NVMEM" instead of "select NVMEM". then it would be 
> possible to disable NVMEM but it would get enabled by default)
> 
>> BR,
>> -R
>>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel