[Freedreno] [PATCH v2] drm/msm/dp: add logs across DP driver for ease of debugging
Stephen Boyd
swboyd at chromium.org
Fri Jul 9 01:27:18 UTC 2021
Quoting maitreye (2021-07-08 12:13:44)
> From: Maitreyee Rao <maitreye at codeaurora.org>
>
> Add trace points across the MSM DP driver to help debug
> interop issues.
>
> Changes in v2:
> - Got rid of redundant log messages.
> - Added %#x instead of 0x%x wherever required.
> - Got rid of __func__ calls in debug messages.
> - Added newline wherever missing.
I think this is the new thing in v3? Adding one missing newline?
>
> Signed-off-by: Maitreyee Rao <maitreye at codeaurora.org>
> ---
> drivers/gpu/drm/msm/dp/dp_catalog.c | 8 ++++++--
> drivers/gpu/drm/msm/dp/dp_ctrl.c | 5 ++++-
> drivers/gpu/drm/msm/dp/dp_display.c | 14 ++++++++++++++
> drivers/gpu/drm/msm/dp/dp_link.c | 17 ++++++++++-------
> drivers/gpu/drm/msm/dp/dp_panel.c | 2 ++
> drivers/gpu/drm/msm/dp/dp_power.c | 3 +++
> 6 files changed, 39 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
> index 32f3575..292ec2c 100644
> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> @@ -372,6 +372,7 @@ void dp_catalog_ctrl_mainlink_ctrl(struct dp_catalog *dp_catalog,
> struct dp_catalog_private *catalog = container_of(dp_catalog,
> struct dp_catalog_private, dp_catalog);
>
> + DRM_DEBUG_DP("enable=%d\n", enable);
> if (enable) {
> /*
> * To make sure link reg writes happens before other operation,
> @@ -580,6 +581,7 @@ void dp_catalog_hpd_config_intr(struct dp_catalog *dp_catalog,
>
> config = (en ? config | intr_mask : config & ~intr_mask);
>
> + DRM_DEBUG_DP("intr_mask=%#x config=%#x\n", intr_mask, config);
> dp_write_aux(catalog, REG_DP_DP_HPD_INT_MASK,
> config & DP_DP_HPD_INT_MASK);
> }
> @@ -610,6 +612,7 @@ u32 dp_catalog_link_is_connected(struct dp_catalog *dp_catalog)
> u32 status;
>
> status = dp_read_aux(catalog, REG_DP_DP_HPD_INT_STATUS);
> + DRM_DEBUG_DP("aux status:%#x\n", status);
Unstick colon from printf specifier?
> status >>= DP_DP_HPD_STATE_STATUS_BITS_SHIFT;
> status &= DP_DP_HPD_STATE_STATUS_BITS_MASK;
>
> @@ -685,6 +688,7 @@ void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> /* Make sure to clear the current pattern before starting a new one */
> dp_write_link(catalog, REG_DP_STATE_CTRL, 0x0);
>
> + DRM_DEBUG_DP("pattern:%#x\n", pattern);
Unstick colon from printf specifier?
> switch (pattern) {
> case DP_PHY_TEST_PATTERN_D10_2:
> dp_write_link(catalog, REG_DP_STATE_CTRL,
> @@ -745,7 +749,7 @@ void dp_catalog_ctrl_send_phy_pattern(struct dp_catalog *dp_catalog,
> DP_STATE_CTRL_LINK_TRAINING_PATTERN4);
> break;
> default:
> - DRM_DEBUG_DP("No valid test pattern requested:0x%x\n", pattern);
> + DRM_DEBUG_DP("No valid test pattern requested:%#x\n", pattern);
Unstick colon from printf specifier?
> break;
> }
> }
> @@ -928,7 +932,7 @@ void dp_catalog_audio_config_acr(struct dp_catalog *dp_catalog)
> select = dp_catalog->audio_data;
> acr_ctrl = select << 4 | BIT(31) | BIT(8) | BIT(14);
>
> - DRM_DEBUG_DP("select = 0x%x, acr_ctrl = 0x%x\n", select, acr_ctrl);
> + DRM_DEBUG_DP("select =0x%x, acr_ctrl =0x%x\n", select, acr_ctrl);
This doesn't use %#x? And then it sticks it to the equals sign but
doesn't move select and acr_ctrl to them?
>
> dp_write_link(catalog, MMSS_DP_AUDIO_ACR_CTRL, acr_ctrl);
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index 2a8955c..21ad7d3 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -122,7 +122,7 @@ void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
> IDLE_PATTERN_COMPLETION_TIMEOUT_JIFFIES))
> pr_warn("PUSH_IDLE pattern timedout\n");
>
> - pr_debug("mainlink off done\n");
> + DRM_DEBUG_DP("PUSH IDLE, mainlink off done\n");
I think we already get the func name as dp_ctrl_push_idle in the print
so is having PUSH IDLE in all caps really useful?
> }
>
> static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
> @@ -1013,6 +1013,8 @@ static int dp_ctrl_update_vx_px(struct dp_ctrl_private *ctrl)
> u32 voltage_swing_level = link->phy_params.v_level;
> u32 pre_emphasis_level = link->phy_params.p_level;
>
> + DRM_DEBUG_DP("voltage level: %d emphasis level: %d\n", voltage_swing_level,
> + pre_emphasis_level);
> ret = dp_catalog_ctrl_update_vx_px(ctrl->catalog,
> voltage_swing_level, pre_emphasis_level);
>
> @@ -1384,6 +1386,7 @@ int dp_ctrl_host_init(struct dp_ctrl *dp_ctrl, bool flip, bool reset)
> if (reset)
> dp_catalog_ctrl_reset(ctrl->catalog);
>
> + DRM_DEBUG_DP("flip=%d\n", flip);
> dp_catalog_ctrl_phy_reset(ctrl->catalog);
> phy_init(phy);
> dp_catalog_ctrl_enable_irq(ctrl->catalog, true);
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index cf9c645..45301c5 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -275,6 +275,8 @@ static bool dp_display_is_ds_bridge(struct dp_panel *panel)
>
> static bool dp_display_is_sink_count_zero(struct dp_display_private *dp)
> {
> + DRM_DEBUG_DP("present=%#x sink_count=%d\n", dp->panel->dpcd[DP_DOWNSTREAMPORT_PRESENT],
> + dp->link->sink_count);
> return dp_display_is_ds_bridge(dp->panel) &&
> (dp->link->sink_count == 0);
> }
> @@ -320,6 +322,7 @@ static int dp_display_send_hpd_notification(struct dp_display_private *dp,
>
> dp->dp_display.is_connected = hpd;
>
> + DRM_DEBUG_DP("hpd=%d\n", hpd);
> dp_display_send_hpd_event(&dp->dp_display);
>
> return 0;
> @@ -369,6 +372,7 @@ static void dp_display_host_init(struct dp_display_private *dp, int reset)
> {
> bool flip = false;
>
> + DRM_DEBUG_DP("core_initialized=%d\n", dp->core_initialized);
> if (dp->core_initialized) {
> DRM_DEBUG_DP("DP core already initialized\n");
> return;
> @@ -483,8 +487,10 @@ static int dp_display_handle_irq_hpd(struct dp_display_private *dp)
> {
> u32 sink_request = dp->link->sink_request;
>
> + DRM_DEBUG_DP("%d\n", sink_request);
> if (dp->hpd_state == ST_DISCONNECTED) {
> if (sink_request & DP_LINK_STATUS_UPDATED) {
> + DRM_DEBUG_DP("Disconnected sink_count:%d\n", sink_request);
> DRM_ERROR("Disconnected, no DP_LINK_STATUS_UPDATED\n");
> return -EINVAL;
> }
> @@ -509,6 +515,7 @@ static int dp_display_usbpd_attention_cb(struct device *dev)
> DRM_ERROR("invalid dev\n");
> return -EINVAL;
> }
> + DRM_DEBUG_DP("sink_request:%d\n", sink_request);
Unstick from colon?
>
> dp = container_of(g_dp_display,
> struct dp_display_private, dp_display);
> @@ -523,6 +530,7 @@ static int dp_display_usbpd_attention_cb(struct device *dev)
> rc = dp_link_process_request(dp->link);
> if (!rc) {
> sink_request = dp->link->sink_request;
> + DRM_DEBUG_DP("hpd_state=%d sink_count=%d\n", dp->hpd_state, sink_request);
> if (sink_request & DS_PORT_STATUS_CHANGED)
> rc = dp_display_handle_port_ststus_changed(dp);
> else
> @@ -545,6 +553,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
> mutex_lock(&dp->event_mutex);
>
> state = dp->hpd_state;
> + DRM_DEBUG_DP("hpd_state=%d\n", state);
> if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) {
> mutex_unlock(&dp->event_mutex);
> return 0;
> @@ -680,6 +689,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
> /* start sentinel checking in case of missing uevent */
> dp_add_event(dp, EV_DISCONNECT_PENDING_TIMEOUT, 0, DP_TIMEOUT_5_SECOND);
>
> + DRM_DEBUG_DP("hpd_state=%d\n", state);
> /* signal the disconnect event early to ensure proper teardown */
> dp_display_handle_plugged_change(g_dp_display, false);
>
> @@ -738,6 +748,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
> if (ret == -ECONNRESET) { /* cable unplugged */
> dp->core_initialized = false;
> }
> + DRM_DEBUG_DP("hpd_state=%d\n", state);
>
> mutex_unlock(&dp->event_mutex);
>
> @@ -882,6 +893,7 @@ static int dp_display_enable(struct dp_display_private *dp, u32 data)
>
> dp_display = g_dp_display;
>
> + DRM_DEBUG_DP("sink_count=%d\n", dp->link->sink_count);
> if (dp_display->power_on) {
> DRM_DEBUG_DP("Link already setup, return\n");
> return 0;
> @@ -943,6 +955,7 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)
>
> dp_display->power_on = false;
>
> + DRM_DEBUG_DP("sink count:%d\n", dp->link->sink_count);
> return 0;
> }
>
> @@ -1190,6 +1203,7 @@ static irqreturn_t dp_display_irq_handler(int irq, void *dev_id)
>
> hpd_isr_status = dp_catalog_hpd_get_intr_status(dp->catalog);
>
> + DRM_DEBUG_DP("hpd isr status=%#x\n", hpd_isr_status);
> if (hpd_isr_status & 0x0F) {
> /* hpd related interrupts */
> if (hpd_isr_status & DP_DP_HPD_PLUG_INT_MASK ||
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> index be986da..316e8e6 100644
> --- a/drivers/gpu/drm/msm/dp/dp_link.c
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -1036,43 +1036,46 @@ int dp_link_process_request(struct dp_link *dp_link)
>
> if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
> dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
> - return ret;
> + goto out;
> }
>
> ret = dp_link_process_ds_port_status_change(link);
> if (!ret) {
> dp_link->sink_request |= DS_PORT_STATUS_CHANGED;
> - return ret;
> + goto out;
> }
>
> ret = dp_link_process_link_training_request(link);
> if (!ret) {
> dp_link->sink_request |= DP_TEST_LINK_TRAINING;
> - return ret;
> + goto out;
> }
>
> ret = dp_link_process_phy_test_pattern_request(link);
> if (!ret) {
> dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN;
> - return ret;
> + goto out;
> }
>
> ret = dp_link_process_link_status_update(link);
> if (!ret) {
> dp_link->sink_request |= DP_LINK_STATUS_UPDATED;
> - return ret;
> + goto out;
> }
>
> if (dp_link_is_video_pattern_requested(link)) {
> - ret = 0;
> dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN;
> + goto out;
> }
>
> if (dp_link_is_audio_pattern_requested(link)) {
> dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN;
> - return -EINVAL;
> + ret = -EINVAL;
> + goto out;
> }
>
> +out:
> + DRM_DEBUG_DP("sink request=%#x", dp_link->sink_request);
> return ret;
I suspect this could be more readable by using if/else-if instead of
goto out pattern. Can you make that change instead so we get down to the
bottom of this function without using a label?
> }
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> index 88196f7..71db071 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -66,6 +66,8 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
> goto end;
> }
>
> + DRM_DEBUG_DP("%s 0x%x 0x%x 0x%x 0x%x 0x%x\n", __func__, dpcd[0],
Drop __func__? Is this needed at all?
> + dpcd[1], dpcd[2], dpcd[3], dpcd[4]);
> link_info->revision = dpcd[DP_DPCD_REV];
> major = (link_info->revision >> 4) & 0x0f;
> minor = link_info->revision & 0x0f;
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
> index 3961ba4..37c214b 100644
> --- a/drivers/gpu/drm/msm/dp/dp_power.c
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> @@ -208,6 +208,9 @@ static int dp_power_clk_set_rate(struct dp_power_private *power,
>
> int dp_power_clk_status(struct dp_power *dp_power, enum dp_pm_type pm_type)
> {
> + DRM_DEBUG_DP("core_clk_on=%d link_clk_on=%d stream_clk_on=%d\n",
> + dp_power->core_clks_on, dp_power->link_clks_on, dp_power->stream_clks_on);
> +
> if (pm_type == DP_CORE_PM)
> return dp_power->core_clks_on;
>
More information about the Freedreno
mailing list