[Freedreno] [PATCH v1 3/7] drm/msm/dpu: support setting up two independent DSI connectors

[abhinavk at codeaurora.org]

On 2021-07-08 05:28, Dmitry Baryshkov wrote:
> Move setting up encoders from set_encoder_mode to
> _dpu_kms_initialize_dsi() / _dpu_kms_initialize_displayport(). This
> allows us to support not only "single DSI" and "bonded DSI" but also 
> "two
> independent DSI" configurations. In future this would also help adding
> support for multiple DP connectors.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 102 +++++++++++++-----------
>  1 file changed, 57 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 1d3a4f395e74..8459da36174e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -471,30 +471,68 @@ static int _dpu_kms_initialize_dsi(struct 
> drm_device *dev,
>  				    struct dpu_kms *dpu_kms)
>  {
>  	struct drm_encoder *encoder = NULL;
> +	struct msm_display_info info;
>  	int i, rc = 0;
> 
>  	if (!(priv->dsi[0] || priv->dsi[1]))
>  		return rc;
> 
> -	/*TODO: Support two independent DSI connectors */
> -	encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI);
> -	if (IS_ERR(encoder)) {
> -		DPU_ERROR("encoder init failed for dsi display\n");
> -		return PTR_ERR(encoder);
> -	}
> -
> -	priv->encoders[priv->num_encoders++] = encoder;
> -
> +	/*
> +	 * We support following confiurations:
> +	 * - Single DSI host (dsi0 or dsi1)
> +	 * - Two independent DSI hosts
> +	 * - Bonded DSI0 and DSI1 hosts
> +	 *
> +	 *   TODO: Support swapping DSI0 and DSI1 in the bonded setup.
> +	 */
>  	for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
>  		if (!priv->dsi[i])
>  			continue;
> 
> +		if (!encoder) {
> +			encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI);
> +			if (IS_ERR(encoder)) {
> +				DPU_ERROR("encoder init failed for dsi display\n");
> +				return PTR_ERR(encoder);
> +			}
> +
> +			priv->encoders[priv->num_encoders++] = encoder;
> +
> +			memset(&info, 0, sizeof(info));
> +			info.intf_type = encoder->encoder_type;
> +			info.capabilities = msm_dsi_is_cmd_mode(priv->dsi[i]) ?
> +				MSM_DISPLAY_CAP_CMD_MODE :
> +				MSM_DISPLAY_CAP_VID_MODE;
> +		}
> +
>  		rc = msm_dsi_modeset_init(priv->dsi[i], dev, encoder);
>  		if (rc) {
>  			DPU_ERROR("modeset_init failed for dsi[%d], rc = %d\n",
>  				i, rc);
>  			break;
>  		}
> +
> +		info.h_tile_instance[info.num_of_h_tiles++] = i;
> +
> +		/* Register non-bonded encoder here. If the encoder is bonded,
> +		 * it will be registered later, when both DSI hosts are
> +		 * initialized.
> +		 */
> +		if (!msm_dsi_is_bonded_dsi(priv->dsi[i])) {
> +			rc = dpu_encoder_setup(dev, encoder, &info);
> +			if (rc)
> +				DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
> +					  encoder->base.id, rc);
> +			encoder = NULL;
Seems like you are using encoder = NULL as a check to distinguish 
whether this is bonded mode or not.
> +		}
> +	}
> +
> +	/* Register bonded encoder here, when both DSI hosts are initialized 
> */
> +	if (encoder) {
Why cant we replace this with if (msm_dsi_is_bonded_dsi(priv->dsi[i]) 
and get rid
of the encoder = NULL?
> +		rc = dpu_encoder_setup(dev, encoder, &info);
> +		if (rc)
> +			DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
> +				  encoder->base.id, rc);
>  	}
> 
>  	return rc;
> @@ -505,6 +543,7 @@ static int _dpu_kms_initialize_displayport(struct
> drm_device *dev,
>  					    struct dpu_kms *dpu_kms)
>  {
>  	struct drm_encoder *encoder = NULL;
> +	struct msm_display_info info;
>  	int rc = 0;
> 
>  	if (!priv->dp)
> @@ -516,6 +555,7 @@ static int _dpu_kms_initialize_displayport(struct
> drm_device *dev,
>  		return PTR_ERR(encoder);
>  	}
> 
> +	memset(&info, 0, sizeof(info));
>  	rc = msm_dp_modeset_init(priv->dp, dev, encoder);
>  	if (rc) {
>  		DPU_ERROR("modeset_init failed for DP, rc = %d\n", rc);
> @@ -524,6 +564,14 @@ static int _dpu_kms_initialize_displayport(struct
> drm_device *dev,
>  	}
> 
>  	priv->encoders[priv->num_encoders++] = encoder;
> +
> +	info.num_of_h_tiles = 1;
> +	info.capabilities = MSM_DISPLAY_CAP_VID_MODE;
> +	info.intf_type = encoder->encoder_type;
> +	rc = dpu_encoder_setup(dev, encoder, &info);
> +	if (rc)
> +		DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
> +			  encoder->base.id, rc);
>  	return rc;
>  }
> 
> @@ -726,41 +774,6 @@ static void dpu_kms_destroy(struct msm_kms *kms)
>  	msm_kms_destroy(&dpu_kms->base);
>  }
> 
> -static void _dpu_kms_set_encoder_mode(struct msm_kms *kms,
> -				 struct drm_encoder *encoder,
> -				 bool cmd_mode)
> -{
> -	struct msm_display_info info;
> -	struct msm_drm_private *priv = encoder->dev->dev_private;
> -	int i, rc = 0;
> -
> -	memset(&info, 0, sizeof(info));
> -
> -	info.intf_type = encoder->encoder_type;
> -	info.capabilities = cmd_mode ? MSM_DISPLAY_CAP_CMD_MODE :
> -			MSM_DISPLAY_CAP_VID_MODE;
> -
> -	switch (info.intf_type) {
> -	case DRM_MODE_ENCODER_DSI:
> -		/* TODO: No support for DSI swap */
> -		for (i = 0; i < ARRAY_SIZE(priv->dsi); i++) {
> -			if (priv->dsi[i]) {
> -				info.h_tile_instance[info.num_of_h_tiles] = i;
> -				info.num_of_h_tiles++;
> -			}
> -		}
> -		break;
> -	case DRM_MODE_ENCODER_TMDS:
> -		info.num_of_h_tiles = 1;
> -		break;
> -	}
> -
> -	rc = dpu_encoder_setup(encoder->dev, encoder, &info);
> -	if (rc)
> -		DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
> -			encoder->base.id, rc);
> -}
> -
>  static irqreturn_t dpu_irq(struct msm_kms *kms)
>  {
>  	struct dpu_kms *dpu_kms = to_dpu_kms(kms);
> @@ -863,7 +876,6 @@ static const struct msm_kms_funcs kms_funcs = {
>  	.get_format      = dpu_get_msm_format,
>  	.round_pixclk    = dpu_kms_round_pixclk,
>  	.destroy         = dpu_kms_destroy,
> -	.set_encoder_mode = _dpu_kms_set_encoder_mode,
>  	.snapshot        = dpu_kms_mdp_snapshot,
>  #ifdef CONFIG_DEBUG_FS
>  	.debugfs_init    = dpu_kms_debugfs_init,