[Freedreno] [PATCH 05/11] drm/msm/disp/dpu1: Add DSC for SDM845 to hw_catalog

[Dmitry Baryshkov]

On 15/07/2021 09:51, Vinod Koul wrote:
> This add SDM845 DSC blocks into hw_catalog
> 
> Signed-off-by: Vinod Koul <vkoul at kernel.org>
> ---
> Changes since RFC:
>   - use BIT values from MASK
> 
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 22 +++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index b569030a0847..b45a08303c99 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -40,6 +40,8 @@
>   
>   #define PINGPONG_SDM845_MASK BIT(DPU_PINGPONG_DITHER)
>   
> +#define DSC_SDM845_MASK BIT(1)
> +

This does not seem used. You can pass (0) as the feature mask.

>   #define PINGPONG_SDM845_SPLIT_MASK \
>   	(PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
>   
> @@ -751,6 +753,24 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
>   	PP_BLK("pingpong_2", PINGPONG_2, 0x6b000, 0, sc7280_pp_sblk),
>   	PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk),
>   };
> +
> +/*************************************************************
> + * DSC sub blocks config
> + *************************************************************/
> +#define DSC_BLK(_name, _id, _base) \
> +	{\
> +	.name = _name, .id = _id, \
> +	.base = _base, .len = 0x140, \
> +	.features = DSC_SDM845_MASK, \
> +	}
> +
> +static struct dpu_dsc_cfg sdm845_dsc[] = {
> +	DSC_BLK("dsc_0", DSC_0, 0x80000),
> +	DSC_BLK("dsc_1", DSC_1, 0x80400),
> +	DSC_BLK("dsc_2", DSC_2, 0x80800),
> +	DSC_BLK("dsc_3", DSC_3, 0x80c00),
> +};
> +
>   /*************************************************************
>    * INTF sub blocks config
>    *************************************************************/
> @@ -1053,6 +1073,8 @@ static void sdm845_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
>   		.mixer = sdm845_lm,
>   		.pingpong_count = ARRAY_SIZE(sdm845_pp),
>   		.pingpong = sdm845_pp,
> +		.dsc_count = ARRAY_SIZE(sdm845_dsc),
> +		.dsc = sdm845_dsc,
>   		.intf_count = ARRAY_SIZE(sdm845_intf),
>   		.intf = sdm845_intf,
>   		.vbif_count = ARRAY_SIZE(sdm845_vbif),
> 


-- 
With best wishes
Dmitry