[Freedreno] [RFC 07/24] arm64: dts: qcom: sm8250: assign DSI clock source parents

[Dmitry Baryshkov]

Assign DSI clock source parents to DSI PHY clocks.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..b6ed94497e8a 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2445,6 +2445,9 @@ dsi0: dsi at ae94000 {
 					      "iface",
 					      "bus";
 
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
@@ -2512,6 +2515,9 @@ dsi1: dsi at ae96000 {
 					      "iface",
 					      "bus";
 
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
-- 
2.30.0