[Freedreno] [PATCH v3 15/25] drm/msm/dsi: drop vco_delay setting from 7nm, 10nm, 14nm drivers

abhinavk at codeaurora.org abhinavk at codeaurora.org
Tue Mar 30 00:01:11 UTC 2021


On 2021-03-27 04:02, Dmitry Baryshkov wrote:
> These drivers do not use vco_delay variable, so drop it from all of
> them.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk at codeaurora.org>
> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 3 ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 ----
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c  | 3 ---
>  3 files changed, 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> index e0df12a841b2..bfb96d87d1d7 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> @@ -99,7 +99,6 @@ struct dsi_pll_10nm {
>  	/* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */
>  	spinlock_t postdiv_lock;
> 
> -	int vco_delay;
>  	struct dsi_pll_config pll_configuration;
>  	struct dsi_pll_regs reg_setup;
> 
> @@ -771,8 +770,6 @@ static int dsi_pll_10nm_init(struct msm_dsi_phy 
> *phy)
>  	pll = &pll_10nm->base;
>  	pll->cfg = phy->cfg;
> 
> -	pll_10nm->vco_delay = 1;
> -
>  	ret = pll_10nm_register(pll_10nm, phy->provided_clocks->hws);
>  	if (ret) {
>  		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> index 7fe7c8348b42..434d02ffa7fe 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> @@ -122,8 +122,6 @@ struct dsi_pll_14nm {
>  	void __iomem *phy_cmn_mmio;
>  	void __iomem *mmio;
> 
> -	int vco_delay;
> -
>  	struct dsi_pll_input in;
>  	struct dsi_pll_output out;
> 
> @@ -1012,8 +1010,6 @@ static int dsi_pll_14nm_init(struct msm_dsi_phy 
> *phy)
>  	pll = &pll_14nm->base;
>  	pll->cfg = phy->cfg;
> 
> -	pll_14nm->vco_delay = 1;
> -
>  	ret = pll_14nm_register(pll_14nm, phy->provided_clocks->hws);
>  	if (ret) {
>  		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> index e6c8040e1bd3..f760904efac9 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> @@ -99,7 +99,6 @@ struct dsi_pll_7nm {
>  	/* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */
>  	spinlock_t postdiv_lock;
> 
> -	int vco_delay;
>  	struct dsi_pll_config pll_configuration;
>  	struct dsi_pll_regs reg_setup;
> 
> @@ -796,8 +795,6 @@ static int dsi_pll_7nm_init(struct msm_dsi_phy 
> *phy)
>  	pll = &pll_7nm->base;
>  	pll->cfg = phy->cfg;
> 
> -	pll_7nm->vco_delay = 1;
> -
>  	ret = pll_7nm_register(pll_7nm, phy->provided_clocks->hws);
>  	if (ret) {
>  		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);


More information about the Freedreno mailing list