[Freedreno] [PATCH v1 0/3] Add support for next gen eDP driver on SnapDragon
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed May 5 10:01:25 UTC 2021
Hi,
On Wed, 5 May 2021 at 11:17, Sankeerth Billakanti
<sbillaka at codeaurora.org> wrote:
>
> These patches add support for the next generation eDP driver on SnapDragon
> with dpu support. The existing eDP driver cannot support the new eDP
> hardware. So, to maintain backward compatibility, the older eDP driver is
> moved to v200 folder and the new generation eDP driver is added in
> the v510 folder.
What exactly does this version correspond to?
I assume that v510 corresponds to sdmshrike/sc8180x. Is it right?
Is it really so specific, or just v2/v5 would be enough? Not to
mention that this is the MDP/ version, while other blocks tend to use
block-specific versions/ids.
Also, how much does it differ from the current DP core supported via
drivers/gpu/drm/msm/dp ?
First two patches did not make it to the linux-msm, so I can not
comment on each of the lines.
However just my few cents (other reviewers might disagree though):
- I see little benefit in renaming the folders just for the sake of
renaming. You can put your code in drivers/gpu/drm/msm/edp-v510, if
you really insist on that. Note that for all other (even incompatible)
hardware types we still use single level of folders.
- Also I see that significant parts of code (e.g. AUX, bridge,
connector, maybe more) are just c&p of old edp code pieces. Please
share the code instead of duplicating it.
- Please consider updating register definitions in xml form and then
providing both changed xml files (to mesa project (?)) and generated
headers into the kernel.
- Please consider using clk_bulk_* functions instead of using
dss_module_power. I'm going to send a patchset reworking current users
to use the generic clk_bulk_* function family.
- In generic, this eDP clock handling seems to match closely DP clocks
handling (with all the name comparison, etc). Consider moving this to
a generic piece of code
- PHY seems to be a version of QMP PHY. Please use it, like it was
done for the DP itself. There is support for combined USB+DP PHYs
(both v3 and v4), so it should be possible to extend that for eDP.
> These are baseline changes with which we can enable display. The new eDP
> controller can also support additional features such as backlight control,
> PSR etc. which will be enabled in subsequent patch series.
>
> Summary of changes:
> DPU driver interface to the new eDP v510 display driver.
> New generation eDP controller and phy driver implementation.
> A common interface to choose enable the required eDP driver.
>
> Sankeerth Billakanti (3):
> drm/msm/edp: support multiple generations of edp hardware
> drm/msm/edp: add support for next gen edp
> drm/msm/disp/dpu1: add support for edp encoder
>
> drivers/gpu/drm/msm/Makefile | 19 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 7 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 33 +
> drivers/gpu/drm/msm/edp/edp.c | 198 ---
> drivers/gpu/drm/msm/edp/edp.h | 78 -
> drivers/gpu/drm/msm/edp/edp.xml.h | 380 -----
> drivers/gpu/drm/msm/edp/edp_aux.c | 264 ----
> drivers/gpu/drm/msm/edp/edp_bridge.c | 111 --
> drivers/gpu/drm/msm/edp/edp_common.c | 38 +
> drivers/gpu/drm/msm/edp/edp_common.h | 47 +
> drivers/gpu/drm/msm/edp/edp_connector.c | 132 --
> drivers/gpu/drm/msm/edp/edp_ctrl.c | 1375 ------------------
> drivers/gpu/drm/msm/edp/edp_phy.c | 98 --
> drivers/gpu/drm/msm/edp/v200/edp.xml.h | 380 +++++
> drivers/gpu/drm/msm/edp/v200/edp_v200.c | 210 +++
> drivers/gpu/drm/msm/edp/v200/edp_v200.h | 70 +
> drivers/gpu/drm/msm/edp/v200/edp_v200_aux.c | 264 ++++
> drivers/gpu/drm/msm/edp/v200/edp_v200_bridge.c | 111 ++
> drivers/gpu/drm/msm/edp/v200/edp_v200_connector.c | 132 ++
> drivers/gpu/drm/msm/edp/v200/edp_v200_ctrl.c | 1375 ++++++++++++++++++
> drivers/gpu/drm/msm/edp/v200/edp_v200_phy.c | 98 ++
> drivers/gpu/drm/msm/edp/v510/edp_v510.c | 220 +++
> drivers/gpu/drm/msm/edp/v510/edp_v510.h | 151 ++
> drivers/gpu/drm/msm/edp/v510/edp_v510_aux.c | 268 ++++
> drivers/gpu/drm/msm/edp/v510/edp_v510_bridge.c | 111 ++
> drivers/gpu/drm/msm/edp/v510/edp_v510_connector.c | 117 ++
> drivers/gpu/drm/msm/edp/v510/edp_v510_ctrl.c | 1583 +++++++++++++++++++++
> drivers/gpu/drm/msm/edp/v510/edp_v510_phy.c | 641 +++++++++
> drivers/gpu/drm/msm/edp/v510/edp_v510_reg.h | 339 +++++
> 29 files changed, 6207 insertions(+), 2643 deletions(-)
> delete mode 100644 drivers/gpu/drm/msm/edp/edp.c
> delete mode 100644 drivers/gpu/drm/msm/edp/edp.h
> delete mode 100644 drivers/gpu/drm/msm/edp/edp.xml.h
> delete mode 100644 drivers/gpu/drm/msm/edp/edp_aux.c
> delete mode 100644 drivers/gpu/drm/msm/edp/edp_bridge.c
> create mode 100644 drivers/gpu/drm/msm/edp/edp_common.c
> create mode 100644 drivers/gpu/drm/msm/edp/edp_common.h
> delete mode 100644 drivers/gpu/drm/msm/edp/edp_connector.c
> delete mode 100644 drivers/gpu/drm/msm/edp/edp_ctrl.c
> delete mode 100644 drivers/gpu/drm/msm/edp/edp_phy.c
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp.xml.h
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200.c
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200.h
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_aux.c
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_bridge.c
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_connector.c
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_ctrl.c
> create mode 100644 drivers/gpu/drm/msm/edp/v200/edp_v200_phy.c
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510.c
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510.h
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_aux.c
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_bridge.c
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_connector.c
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_ctrl.c
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_phy.c
> create mode 100644 drivers/gpu/drm/msm/edp/v510/edp_v510_reg.h
>
> --
> The Qualcomm Innovatin Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
>
--
With best wishes
Dmitry
More information about the Freedreno
mailing list