[Freedreno] [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths

[Bjorn Andersson]

It's typical for the bootloader to configure CTL_0 for the boot splash
or EFIFB, but for non-DSI use cases the DPU driver tend to pick another
CTL and the system might end up with two configured data paths producing
data on the same INTF - with resulting graphical artifacts.

Naturally the end goal would be to inherit the bootloader's
configuration and provide the user with a glitch free handover from the
boot configuration to a running DPU.
But such effort will affect clocks, regulators, power-domains etc, so in
the meantime this patch simply disables all INTFs and clear all
configured data paths, to avoid the graphical artifacts.

Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c |  4 +++
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c    |  2 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c     | 36 ++++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h     |  8 +++++
 4 files changed, 50 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 2d4645e01ebf..7aba27c1055a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -349,9 +349,13 @@ static void dpu_hw_ctl_clear_all_blendstages(struct dpu_hw_ctl *ctx)
 		DPU_REG_WRITE(c, CTL_LAYER_EXT(LM_0 + i), 0);
 		DPU_REG_WRITE(c, CTL_LAYER_EXT2(LM_0 + i), 0);
 		DPU_REG_WRITE(c, CTL_LAYER_EXT3(LM_0 + i), 0);
+
+		ctx->pending_flush_mask |= dpu_hw_ctl_get_bitmask_mixer(ctx, LM_0 + i);
 	}
 
 	DPU_REG_WRITE(c, CTL_FETCH_PIPE_ACTIVE, 0);
+
+	ctx->pending_flush_mask |= CTL_FLUSH_MASK_CTL;
 }
 
 static void dpu_hw_ctl_setup_blendstage(struct dpu_hw_ctl *ctx,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 88e9cc38c13b..8b01cb660381 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -970,6 +970,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 
 	dpu_kms->rm_init = true;
 
+	dpu_rm_clear_boot_config(&dpu_kms->rm, dpu_kms->catalog);
+
 	dpu_kms->hw_mdp = dpu_hw_mdptop_init(MDP_TOP, dpu_kms->mmio,
 					     dpu_kms->catalog);
 	if (IS_ERR(dpu_kms->hw_mdp)) {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index fd2d104f0a91..2cf47084482f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -4,6 +4,7 @@
  */
 
 #define pr_fmt(fmt)	"[drm:%s] " fmt, __func__
+#include <linux/delay.h>
 #include "dpu_kms.h"
 #include "dpu_hw_lm.h"
 #include "dpu_hw_ctl.h"
@@ -229,6 +230,41 @@ int dpu_rm_init(struct dpu_rm *rm,
 	return rc ? rc : -EFAULT;
 }
 
+void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat)
+{
+	struct dpu_hw_intf *intf;
+	struct dpu_hw_ctl *ctl;
+	int i;
+
+	for (i = INTF_0; i < INTF_MAX; i++) {
+		if (!rm->intf_blks[i - INTF_0])
+			continue;
+
+		DPU_DEBUG("disabling intf%d timing engine\n", i - INTF_0);
+
+		intf = to_dpu_hw_intf(rm->intf_blks[i - INTF_0]);
+		intf->ops.enable_timing(intf, 0);
+	}
+
+	/*
+	 * Wait one frame for the INTF timing engine to stop, and then wait one
+	 * more frame, per the documentation.
+	 */
+	msleep(32);
+
+	for (i = CTL_0; i < CTL_MAX; i++) {
+		if (!rm->ctl_blks[i - CTL_0])
+			continue;
+
+		DPU_DEBUG("clearing ctl%d layer configuration\n", i - CTL_0);
+
+		ctl = to_dpu_hw_ctl(rm->ctl_blks[i - CTL_0]);
+		ctl->ops.clear_all_blendstages(ctl);
+		ctl->ops.trigger_flush(ctl);
+		ctl->ops.trigger_start(ctl);
+	}
+}
+
 static bool _dpu_rm_needs_split_display(const struct msm_display_topology *top)
 {
 	return top->num_intf > 1;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
index 1f12c8d5b8aa..53cd649614a3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
@@ -88,5 +88,13 @@ void dpu_rm_release(struct dpu_global_state *global_state,
 int dpu_rm_get_assigned_resources(struct dpu_rm *rm,
 	struct dpu_global_state *global_state, uint32_t enc_id,
 	enum dpu_hw_blk_type type, struct dpu_hw_blk **blks, int blks_size);
+
+/**
+ * dpu_rm_clear_boot_config() - Tear down any data paths configured by boot
+ * @rm: DPU Resource Manger handle
+ * @cat: Pointer to hardware catalog
+ */
+void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat);
+
 #endif /* __DPU_RM_H__ */
 
-- 
2.29.2