[Freedreno] [v3 1/2] dt-bindings: backlight: add DisplayPort aux backlight
rajeevny at codeaurora.org
rajeevny at codeaurora.org
Tue May 11 18:11:57 UTC 2021
On 01-05-2021 03:08, Doug Anderson wrote:
> Hi,
>
> On Fri, Apr 30, 2021 at 8:10 AM <rajeevny at codeaurora.org> wrote:
>>
>> On 30-04-2021 02:33, Doug Anderson wrote:
>> > Hi,
>> >
>> > On Thu, Apr 29, 2021 at 11:04 AM Rob Herring <robh at kernel.org> wrote:
>> >>
>> >> On Mon, Apr 26, 2021 at 11:29:15AM +0530, Rajeev Nandan wrote:
>> >> > Add bindings for DisplayPort aux backlight driver.
>> >> >
>> >> > Changes in v2:
>> >> > - New
>> >> >
>> >> > Signed-off-by: Rajeev Nandan <rajeevny at codeaurora.org>
>> >> > ---
>> >> > .../bindings/leds/backlight/dp-aux-backlight.yaml | 49 ++++++++++++++++++++++
>> >> > 1 file changed, 49 insertions(+)
>> >> > create mode 100644 Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml
>> >> >
>> >> > diff --git a/Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml
>> >> > new file mode 100644
>> >> > index 00000000..0fa8bf0
>> >> > --- /dev/null
>> >> > +++ b/Documentation/devicetree/bindings/leds/backlight/dp-aux-backlight.yaml
>> >> > @@ -0,0 +1,49 @@
>> >> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> >> > +%YAML 1.2
>> >> > +---
>> >> > +$id: http://devicetree.org/schemas/leds/backlight/dp-aux-backlight.yaml#
>> >> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> >> > +
>> >> > +title: DisplayPort aux backlight driver bindings
>> >> > +
>> >> > +maintainers:
>> >> > + - Rajeev Nandan <rajeevny at codeaurora.org>
>> >> > +
>> >> > +description:
>> >> > + Backlight driver to control the brightness over DisplayPort aux channel.
>> >> > +
>> >> > +allOf:
>> >> > + - $ref: common.yaml#
>> >> > +
>> >> > +properties:
>> >> > + compatible:
>> >> > + const: dp-aux-backlight
>> >> > +
>> >> > + ddc-i2c-bus:
>> >> > + $ref: /schemas/types.yaml#/definitions/phandle
>> >> > + description:
>> >> > + A phandle to the system I2C controller connected to the DDC bus used
>> >> > + for the DisplayPort AUX channel.
>> >> > +
>> >> > + enable-gpios:
>> >> > + maxItems: 1
>> >> > + description: GPIO specifier for backlight enable pin.
>> >> > +
>> >> > + max-brightness: true
>> >> > +
>> >> > +required:
>> >> > + - compatible
>> >> > + - ddc-i2c-bus
>> >> > +
>> >> > +additionalProperties: false
>> >> > +
>> >> > +examples:
>> >> > + - |
>> >> > + backlight {
>> >> > + compatible = "dp-aux-backlight";
>> >> > + ddc-i2c-bus = <&sn65dsi86_bridge>;
>> >> > + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
>> >>
>> >> So the DDC bus is connected to a backlight and also a panel? This
>> >> binding is not reflecting the h/w, but rather what you want for some
>> >> driver.
>> >>
>> >> There's only one thing here and that's an eDP panel which supports
>> >> backlight control via DP aux channel. You can figure all that out from
>> >> the panel's compatible and/or reading the EDID.
>> >>
>> >> You might also be interested in this thread:
>> >>
>> >> https://lore.kernel.org/lkml/YIKsDtjcIHGNvW0u@orome.fritz.box/
>> >
>> > I think Rajeev needs to rework everything anyway as per:
>> >
>> > https://lore.kernel.org/r/87zgxl5qar.fsf@intel.com
>> >
>> > ...but you're right that it makes sense not to model the backlight as
>> > a separate node in the device tree. The panel driver can handle
>> > setting up the backlight.
>> >
>> > -Doug
>>
>> It was not a good idea to create a separate backlight driver and use
>> ddc-i2c-bus to get access to DP aux. I am working to move the code
>> to the panel driver and to utilize the new DRM helper functions
>> (drm_edp_backlight_*) Lyude has added [1].
>>
>> To use these helper functions, the panel driver should have access to
>> the
>> "struct drm_dp_aux *". The simple-panel has a "ddc-i2c-bus" property
>> to give the panel access to the DDC bus and is currently being used to
>> get the EDID from the panel. Can I use the same ddc bus i2c_adapter to
>> get
>> the "struct drm_dp_aux *"?
>>
>> As per the suggestion [2], I get the "struct drm_dp_aux *" from the
>> i2c_adapter of ddc bus (maybe I didn't understand the suggestion
>> correctly),
>> and, it turned out, the way I have implemented is not the right way
>> [3].
>> So, I am afraid to use the same method in the panel driver.
>>
>>
>> [1] https://lore.kernel.org/dri-devel/871rb5bcf9.fsf@intel.com/
>> [2] https://www.spinics.net/lists/dri-devel/msg295429.html
>> [3]
>> https://lore.kernel.org/dri-devel/20210426111116.4lc3ekxjugjr3oho@maple.lan/
>
> So it's definitely up to maintainers, not me. ...but I guess I would
> have expected something like a new property called "ddc-aux-bus". Then
> you'd have to create a new API call called something like
> "of_find_ddc_aux_adapter_by_node()" that would allow you to find it.
>
To implement the first suggestion, I can think of the following way
to get the "struct drm_dp_aux" in the panel_simple_probe function:
- Create a new panel-simple DT property "ddc-aux-bus", a phandle to the
platform device that implements the AUX channel.
- Create a global list of drm_dp_aux in drm_dp_helper.c. Initialize list
head
in drm_dp_aux_init(), add the drm_dp_aux onto the list in
drm_dp_aux_register().
Similarly, remove the drm_dp_aux from list in drm_dp_aux_unregister().
- Create a new function of_drm_find_dp_aux_by_node() to get the expected
drm_dp_aux from this global list.
Please let me know your views on this implementation.
Below is the summary of the changes in drm dp helper:
---
// drm_dp_helper.h
struct drm_dp_aux {
...
struct list_head list;
...
}
// drm_dp_helper.c
static DEFINE_MUTEX(dp_aux_lock);
static LIST_HEAD(dp_aux_list);
static void drm_dp_aux_add(struct drm_dp_aux *aux)
{
mutex_lock(&dp_aux_lock);
list_add_tail(&aux->list, &dp_aux_list);
mutex_unlock(&dp_aux_lock);
}
static void drm_dp_aux_remove(struct drm_dp_aux *aux)
{
mutex_lock(&dp_aux_lock);
list_del_init(&aux->list);
mutex_unlock(&dp_aux_lock);
}
#ifdef CONFIG_OF
struct drm_dp_aux *of_drm_find_dp_aux_by_node(struct device_node *np)
{
struct drm_dp_aux *aux;
mutex_lock(&dp_aux_lock);
list_for_each_entry(aux, &dp_aux_list, list) {
if (aux->dev->of_node == np) {
mutex_unlock(&dp_aux_lock);
return aux;
}
}
mutex_unlock(&dp_aux_lock);
return NULL;
}
EXPORT_SYMBOL(of_drm_find_dp_aux_by_node);
#endif
int drm_dp_aux_init(struct drm_dp_aux *aux)
{
INIT_LIST_HEAD(&aux->list);
...
}
int drm_dp_aux_register(struct drm_dp_aux *aux)
{
...
drm_dp_aux_add(aux);
return 0;
}
void drm_dp_aux_unregister(struct drm_dp_aux *aux)
{
drm_dp_aux_remove(aux);
...
}
---
Thanks,
Rajeev
> I guess an alternate way to solve this (I'm not totally sure whether
> it's better or worse) would be to add a function that would walk up
> the chain of parent bridges and ask them for a pointer to the aux bus.
> I definitely haven't thought it all the way through, but I'd imagine
> something like drm_bridge_chain_get_ddc_aux(). This is _probably_
> better than adding the "ddc-aux-bus" property but it assumes that the
> aux bus is provided by one of our parents. Hrm, looking at this
> briefly, though, I'm not sure how to do it. It doesn't seem possible
> to get the parent bridges from the panel structure. Even if you assume
> that your parent is wrapping you with a panel_bridge it still doesn't
> seem possible?
>
> This probably needs more drm-expertise.
>
> -Doug
More information about the Freedreno
mailing list